Estimating Climate-Change Impacts on Colorado Plateau Snowpack Using Downscaling Methods     

David L. McGinnis 《The Professional geographer》1997,49(1):117-125

This study develops observed climate-based downscaling transfer functions that are used with general circulation model (GCM) output to assess potential global-change impacts on Upper Colorado Plateau, USA, water resources. Daily automated snow water equivalent stations are used with 700 mb atmospheric circulation to determine empirical transfer functions. Downscaling methodologies using multiple regression and neural networks are evaluated, with the neural network results explaining approximately 70%of the daily snowfall variance. The neural network-based transfer functions are used with the GENESIS GCM to simulate snowfall characteristics in both a 1xCO₂ and a 2xCO₂ climate. While the total precipitation simulated by the 2xCO₂ analysis remains nearly the same as today, less will fall as snow; specifically, snow water equivalence shows significant reduction (except in the Green River Basin) as the snow season is reduced by 58 days on average.  相似文献   

中国南方风化磷块岩研究   总被引：3，自引：2，他引：3  

李铁生  文素秋 《化工矿产地质》1996,18(3):196-200

中国南方风化磷块岩中的风化磷矿的自然类型可分为两类七种型式，其中以“原位面型风化磷矿”和“位移溶洞砂砾磷矿”为主。风化磷矿是由其原矿的自身特性与外部适宜条件（水文地质条件为主导）综合作用的产物。根据碳酸盐、磷酸盐矿物分解、淋失程度可划分为弱风化、风化、强风化三个阶段。可用直接法、间接法和数学法３类共１３种方法加以判别  相似文献   

VICARIOUS RADIOMETRIC CALIBRATION OF SATELLITE FY-ID SENSORS AT VISIBLE AND NEAR INFRARED CHANNELS          下载免费PDF全文

ZHANG Yuxiang  QIU Kangmu  HU Xiuqing  RONG Zhiguo  ZHANG Lijun 《Acta Meteorologica Sinica》2004,18(4):505-516

For the problem of in-flight test site radiometric calibration for the FY-1D Meteorological Satellite onboard sensor's visible and near infrared channels,this paper described the calibration method,satellite-ground synchronous observation data acquired at China Dunhuang Calibration Test Site,parameter derivation and radiative transfer computation during the calibration,and the calibration result analysis.At FY-1D seven channels (with central wavelength at Channels 1:630 nm,2:865 nm;6:1610 nm;7:455 nm,8:505 nm;9:555 nm;10:932 nm),calibration coefficients obtained during the ground site calibration were compared with that respectively of prelaunch calibration.It is demonstrated that results of FY-1D onboard two sensors' (A and B) at channels 1,2,6 and 10 were close to pre-calibration,and the absolute difference of Gobi desert reflectance computed using test site and pre-launch calibration coefficients was no more than 2%. At other channels,large pre-launch calibration errors resulted in a poor consistency between the test site and pre-launch calibration.The errors can be corrected by the test site calibration results. Based on a rough estimation,the overall error of the calibration was about 6%. The paper also presented the in-flight vicarious calibration at the visible and near infrared channels of FY-1C sensor A which was launched in 1999 and has been put into operational mode since 2002.The results exhibit that FY-1C sensor's response has 23% attenuation at Channels 7 and 8,while only minor degradation at the other channels was found. During the mission,calibrations were also conducted at NOAA-17's Channels 1 and 2 (1:430-830 nm,2:500-1072 nm).A very good consistency has been achieved between the test site and pre-launched calibration results.  相似文献   

颗粒分析用量筒的规格标准和计量标定     

杨斌娟  马骏  刘燕 《上海国土资源》2004,(4):19-22

文章讨论了国内外用于密度计法颗粒分析用量筒的计量标准的规定，提出了相应的建议和标定方法。  相似文献   

利用敦煌辐射校正场对FY-2B静止气象卫星进行可见光通道的在轨辐射定标   总被引：12，自引：0，他引：12       下载免费PDF全文

戎志国张玉香  邱康睦胡秀清　张立军 《应用气象学报》2004,15(3):266-272

FY-2B由于杂散光的影响，其可见光通道的发射前定标存在较大误差。利用敦煌戈壁滩辐射校正场可进行FY-2B可见光通道的在轨绝对定标。由于FY-2B对于敦煌场区的卫星天顶角接近50°，需要进行场地的方向特性BRDF修正。2002年7月对FY-2B进行了场地地表反射率、大气消光、探空等项同步测量，并对场地的方向特性进行了测量。资料处理结果表明，FY-2B可见光通道杂散光可影响定标精度达20%。长期监视表明FY-2B可见光通道探测器输出十分稳定。该文将4个可见光通道探测器场地定标得出的定标查找表列出，供用户参考使用。  相似文献   

一种改进的MODIS影像BRDF辐射校正方法   总被引：7，自引：0，他引：7  

闫利  王颖  徐亚明 《武汉大学学报(信息科学版)》2004,29(9):788-790,804

针时二向性造成的辐射失真，在核驱动模型的基础上提出了一种改进的二向性反射分布模型，并通过时MODIS影像的试验，得到了减弱辐射差异的较好效果，并对试验结果进行了分析和评价。  相似文献   

中巴地球资源一号卫星CCD图像质量评价和交叉定标研究   总被引：23，自引：0，他引：23  

杨忠东  谷松岩  邱红  黄签  范天锡 《遥感学报》2004,8(2):113-120

使用定量分析方法评价了中巴地球资源卫星CCD相机遥感数据质量 ,在此基础上利用LANDSAT 7ETM 对CCD的对应波段进行交叉定标计算 ,得到了一组CCD的参考定标系数。在遥感数据质量评价研究中 ,使用统计分析方法计算得到了CCD相机图像数据的条纹强度 ;应用结构函数方法计算获得了CCD的噪声数据 ;通过功率谱计算 ,对比分析了CCD和LANDSAT 7ETM 对应波段图像空间纹理特征。该文通过交叉定标计算 ,得到了CCD相机前 4个波段的参考定标系数、动态范围和噪声等效反射率等参考指标 ,并对这组定标系数进行了验证 ,从验证结果中发现CCD1,2 ,3和LANDSAT 7ETM 对应波段反射率最大相差 1 98% ,最小0 0 3% ,平均差要低于 1 31% ,而波段 4最大也仅相差 4 4 1% ,平均差 3 0 2 % ,证明计算得到的交叉定标系数具有较高的参考价值  相似文献   

A comparative study of concentrated plasticity models in dynamic analysis of building structures     

Maurice A. Dides  Juan C. de la Llera 《地震工程与结构动力学》2005,34(8):1005-1026

Concentrated plasticity (CP) models are frequently used in static and dynamic building analysis and have been implemented in available commercial software. This investigation deals with three different CP‐models, a simplified macroelement model (SEM) for a complete building story, a frame element with elasto‐plastic interaction hinges (PH), and a frame element with fiber hinges (FB). The objectives of this work are to evaluate the quality of the earthquake responses predicted by these models and to identify important aspects of their implementation and limitations for their use in dynamic analysis. The three elements are tested in a single‐story asymmetric plan building and in a three‐story steel building. Results show that base shear and global response values are usually computed with better accuracy than interstory deformations and local responses. Besides, the main limitation of elasto‐plastic CP models is to control the displacement offsets that result from perfect elasto‐plastic behavior. On the other hand, calibration of the SEM‐model shows that global responses in steel structures may be computed within 20% error in the mean at a computational cost two orders of magnitude smaller than that of the other CP elements considered. However, the three element models considered lead to increasing levels of accuracy in the dynamic response and their use depends on the refinement of the analysis performed. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

国产机载LiDAR系统安置角误差检校方案研究   总被引：1，自引：0，他引：1  

谢劭峰  刘田龙 《测绘与空间地理信息》2016,(6):50-55

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。  相似文献