Ground motion estimation during the Kashmir earthquake of 8th October 2005   总被引：2，自引：1，他引：1  

S. T. G. Raghukanth 《Natural Hazards》2008,46(1):1-13

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.  相似文献   

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method     

Song Yupu  Zhao Shunbo  Wang Ruimin  Li Shuyao 《海洋学报(英文版)》1994,13(1):143-154

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...  相似文献   

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay     

槐文信  T.  Komatsu  曾小辉 《中国海洋工程》2005,19(4):601-612

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.  相似文献   

Three-dimensional Layer-integrated Modelling of Estuarine Flows with Flooding and Drying   总被引：1，自引：0，他引：1  

B. Lin  R.A. Falconer 《Estuarine, Coastal and Shelf Science》1997,44(6):737-751

Details are given of the refinement and application of a thee-dimensional (3-D) layer-integrated numerical model of tidal circulation, with the aim of simulating severe tidal conditions for practical engineering applications. The mode splitting strategy has been used in the model. A set of depth-integrated 2-D equations are first solved to give the pressure gradient, and the layer-integrated 3-D equations are then solved to obtain the vertical distributions of the flow velocities. Attention has been given to maintaining consistency of the physical quantities derived from the 2-D and 3-D equations. A TWO=layer mixing length turbulence model for the vertical shear stress distribution has been included in the model. Emphasis has been focused on applying the model to a real estuary, which is geometrically complicated and has large tidal ranges giving rise to extensive flooding and drying. The model has been applied to three examples, including: wind-driven flow in a rectangular lake, tidal circulation in a model rectangular harbour, and tidal circulation in a large estuary. Favourable results have been obtained for both the simple and complex flow beds.  相似文献   

分潮波模型多资料数值计算方法研究　Ⅱ.有限差分最小二乘方法     

潘文波  孙文心  王骥 《中国海洋大学学报(自然科学版)》1996,(2)

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。  相似文献   

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

非常规管节点疲劳寿命分析与计算   总被引：6，自引：1，他引：6  

谭开忍肖熙  黄小平 《海洋工程》2005,23(3):51-54,59

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。  相似文献   

Nonlinear dynamic analysis of deep water risers     

V.Hachemi Safai 《Applied Ocean Research》1983,5(4):215-225

The paper presents a theoretical and numerical approach to the dynamical behaviour of risers in deep water which takes into account two types of nonlinearity; that due to viscous drag forces and that due to the large displacements of the riser when submitted to strong axial loads. As the second nonlinearity may have a significant influence upon the behaviour of risers in deep water, a method for automatically updating the structural geometry during the dynamic analysis is given. A computer programme has been written for this purpose.  相似文献