Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

顺序提取法探讨沉积物中主量元素在不同相态的分配特征   总被引：2，自引：0，他引：2  

邹亮  韦刚健 《海洋地质与第四纪地质》2007,27(2):133-140

在Tessier以及欧共体标准局BCR等前人顺序提取方法的基础上，采用一套改进的顺序提取法对海洋沉积物以及一些水系沉积物标准物质的主量元素进行逐步提取。利用ICP—AES、ICP—MS方法分析了各提取液中Ti、A1、Na、Mg、K、Ca、P、Fe、Mn的含量以及它们在不同相态的分配特征，同时，进一步探讨了酸去除沉积物中非陆源组分的效果，结果显示，最后经盐酸淋滤后的样品，沉积物中的生物、自生组分已经被溶解，而残留下来的剩余物质基本上可代表海洋沉积物的陆源碎屑组分。  相似文献   

非常规管节点疲劳寿命分析与计算   总被引：6，自引：1，他引：6  

谭开忍肖熙  黄小平 《海洋工程》2005,23(3):51-54,59

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。  相似文献   

迎风有限元法在三维潮流数值模拟中的应用   总被引：4，自引：0，他引：4  

董文军  陈虹 《海洋与湖沼》1997,28(3):320-327

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特  相似文献   

Binogeochemical process of major elements in sinking particulate of Nansha coral reef lagoons,South     

Song Jinming 《海洋学报(英文版)》1997,16(4):557-562

Ｂｉｎｏｇｅｏｃｈｅｍｉｃａｌ　ｐｒｏｃｅｓｓ　ｏｆ　ｍａｊｏｒ　ｅｌｅｍｅｎｔｓ　ｉｎ　ｓｉｎｉｎｇ　ｐａｒｔｉｃｕｌａｔｅ　ｏｆ　Ｎａｎｓｈａ　ｃｏｒａｌ　ｒｅｅｆ　ｌａｇｏｏｎｓ，Ｓｏｕｔｈ　TXＢｉｎｏｇｅｏｃｈｅｍｉｃａｌｐｒｏｃｅｓｓｏｆｍ...  相似文献   

Nonlinear dynamic analysis of deep water risers     

V.Hachemi Safai 《Applied Ocean Research》1983,5(4):215-225

The paper presents a theoretical and numerical approach to the dynamical behaviour of risers in deep water which takes into account two types of nonlinearity; that due to viscous drag forces and that due to the large displacements of the riser when submitted to strong axial loads. As the second nonlinearity may have a significant influence upon the behaviour of risers in deep water, a method for automatically updating the structural geometry during the dynamic analysis is given. A computer programme has been written for this purpose.  相似文献   

刍论大连湾底质地化环境   总被引：6，自引：0，他引：6  

鲍永恩  马嘉蕊 《海洋科学》1990,(4)

本文根据1987年的调查资料,总结阐述了大连湾底质地化环境诸要素的分布规律及其特征,运用相关分析法,通过多元回归计算求得了诸要素之间的关系。经过综合因素分析,得出了大连湾氧化还原环境分区、还原环境的成因及发展趋势。  相似文献   

雪宝顶碱性花岗岩岩石地球化学与成矿控制   总被引：7，自引：0，他引：7  

曹志敏  郑建斌  安伟  李佑国 《中国海洋大学学报(自然科学版)》2004,34(5):874-880

对雪宝顶碱性花岗岩具有高丰度的W、Sn、Be含量和W、Sn矿化花岗岩的微量元素组合特征进行了分析，结果显示：稀土元素具有∑REE含量与LREE／HREE比值偏低和负Eu异常的特点；元素比值K／Rb，U／Th，Nb／Ta的规律性变化以及矿脉产状特征等表明W-(Sn)-Be脉状矿床形成于岩浆演化晚期，与岩浆期后的热液活动有关。  相似文献