Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

黄海表面水温场的准周期变化分析     

汤明义  李洪海 《中国海洋大学学报(自然科学版)》1989,(Z1)

本文用能谱方法分析了黄海的海表面水温(SST)场的准周期变化。由分析结果清楚地看出,SST具有高频准周期变化:黄海北部以2.6—3.2,1.4—1.7,3.6—3.8和6.7个月的准周期为主;3.3—3.6,5,1.3—2.3及6.7个月在黄海南部占优势。同时,两个海域都有6.7和3.3年的明显的准周期变化。  相似文献   

Three-dimensional Layer-integrated Modelling of Estuarine Flows with Flooding and Drying   总被引：1，自引：0，他引：1  

B. Lin  R.A. Falconer 《Estuarine, Coastal and Shelf Science》1997,44(6):737-751

Details are given of the refinement and application of a thee-dimensional (3-D) layer-integrated numerical model of tidal circulation, with the aim of simulating severe tidal conditions for practical engineering applications. The mode splitting strategy has been used in the model. A set of depth-integrated 2-D equations are first solved to give the pressure gradient, and the layer-integrated 3-D equations are then solved to obtain the vertical distributions of the flow velocities. Attention has been given to maintaining consistency of the physical quantities derived from the 2-D and 3-D equations. A TWO=layer mixing length turbulence model for the vertical shear stress distribution has been included in the model. Emphasis has been focused on applying the model to a real estuary, which is geometrically complicated and has large tidal ranges giving rise to extensive flooding and drying. The model has been applied to three examples, including: wind-driven flow in a rectangular lake, tidal circulation in a model rectangular harbour, and tidal circulation in a large estuary. Favourable results have been obtained for both the simple and complex flow beds.  相似文献   

分潮波模型多资料数值计算方法研究　Ⅱ.有限差分最小二乘方法     

潘文波  孙文心  王骥 《中国海洋大学学报(自然科学版)》1996,(2)

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。  相似文献   

Analysis of Mixing of Pollutants in Water Waves and Currents     

袁丽蓉  沈永明唐军 《中国海洋工程》2007,21(1):115-124

A vertical two-dimensional turbulence numerical model for the interaction of waves and currents is developed in the paper based on the nonlinear two-equation k-ε model with the VOF method.The one-dimensional equivalent advection velocity and equivalent mixing coefficient are defined and the solving process is introduced:The pollutant concentration field,generated by an instant source in waves and currents,is calculated with the model,and then the equivalent advection velocity and equivalent mixing coefficient are obtained by calculating the time derivative of the mean and variance of pollutant concentration probability distribution.The effects of wave period and wave height on the equivalent mixing coefficient for waves and wave-currents are also investigated.  相似文献   

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow     

顾杰  李志伟杨红 詹咏 《中国海洋工程》2007,21(2):305-316

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.  相似文献   

Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献   

A community-wide intercomparison exercise for the determination of dissolved iron in seawater     

Andrew R. Bowie  Eric P. Achterberg  Peter L. Croot  Hein J.W. de Baar  Patrick Laan  James W. Moffett  Simon Ussher  Paul J. Worsfold 《Marine Chemistry》2006

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.  相似文献   

A model of the formation and development of ocean shear wave     

Qiao Fangli  Zhang Qinghua 《海洋学报(英文版)》1994,13(3):345-359

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...  相似文献   

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献