A Connectivity Index for Discrete Fracture Networks     

C. Xu  P. A. Dowd  K. V. Mardia  R. J. Fowell 《Mathematical Geology》2006,38(5):611-634

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.  相似文献   

西北地区泥石流沟形态因素的非线性分析——以兰州市为例     

李建林  冯起 《干旱区地理》2006,29(5):658-662

以兰州市区96条主要的泥石流沟为例,利用分形理论的统计自相似性对泥石流沟数的累计分布随沟谷形态要素沟道比降、汇水面积和沟道长度的变化进行了分析;并与不同流域形态要素的分维进行了比较,探讨了分维不同的原因。兰州市区泥石流沟三个形态要素均具有统计意义上的自相似性,其中以汇水面积显示出分维最小(0.46),沟道长度次之(0.71),沟道比降最大(1.09)。分维的大小描述了作为系统的沟谷及其泥石流的形成的空间结构,即分形结构,同时也反映了不同形态要素对系统所起作用的差异,分维越小,所起作用越显著。其结果对西北干旱半干旱地区石流灾害的进一步研究与防治提供了新的思路。  相似文献   

New typologies for estuarine morphology     

David Prandle  Andrew Lane  Andrew J. Manning   《Geomorphology》2006,81(3-4):309-315

New theories to explain how tides and river flow determine estuarine bathymetries have been developed. The range of validity of these theories has been subsequently assessed against a recently available observational data set.Success in reproducing the evolution of estuarine bathymetries that has occurred over the last 10 000 years provides the basis for the translation, here, of these theories into new typologies. These then provide reference frameworks to enhance our perspective on existing morphologies and identify ‘anomalous’ estuaries. Further refinement of these new theories requires analyses of causal factors responsible for such anomalies drawing on classical morphological experience. These frameworks can also be used for calculating likely future bathymetric adjustments for prescribed changes in mean sea level, tidal amplitudes, river flow and sediment supply.  相似文献   

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques     

LIU Suxia  MO Xingguo  XIA Jun  LIU Changming  LIN Zhonghui  MEN Baohui  JI Lina 《地理学报》2006,16(2):242-250

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.  相似文献   

Geothermal evidence for fluid flow through the gas hydrate stability field off Central Chile—transient flow related to large subduction zone earthquakes?     

Ingo Grevemeyer  Norbert Kaul  Juan L. Diaz-Naveas 《Geophysical Journal International》2006,166(1):461-468

  相似文献   

The role of friction and secondary flaws on deflection and re-initiation of hydraulic fractures at orthogonal pre-existing fractures   总被引：1，自引：0，他引：1  

Xi Zhang  Robert G. Jeffrey 《Geophysical Journal International》2006,166(3):1454-1465

  相似文献   

Effects of fracture lineaments and in-situ rock stresses on groundwater flow in hard rocks: a case study from Sunnfjord, western Norway     

Helge Henriksen  Alvar Braathen 《Hydrogeology Journal》2006,14(4):444-461

Systematic field mapping of fracture lineaments observed on aerial photographs shows that almost all of these structures are positively correlated with zones of high macroscopic and mesoscopic fracture frequencies compared with the surroundings. The lineaments are subdivided into zones with different characteristics: (1) a central zone with fault rocks, high fracture frequency and connectivity but commonly with mineral sealed fractures, and (2) a damage zone divided into a proximal zone with a high fracture frequency of lineament parallel, non-mineralized and interconnected fractures, grading into a distal zone with lower fracture frequencies and which is transitional to the surrounding areas with general background fracturing. To examine the possible relations between lineament architecture and in-situ rock stress on groundwater flow, the geological fieldwork was followed up by in-situ stress measurements and test boreholes at selected sites. Geophysical well logging added valuable information about fracture distribution and fracture flow at depths. Based on the studies of in-situ stresses as well as the lineaments and associated fracture systems presented above, two working hypotheses for groundwater flow were formulated: (i) In areas with a general background fracturing and in the distal zone of lineaments, groundwater flow will mainly occur along fractures parallel with the largest in-situ rock stress, unless fractures are critically loaded or reactivated as shear fractures at angles around 30° to σ_H; (ii) In the influence area of lineaments, the largest potential for groundwater abstraction is in the proximal zone, where there is a high fracture frequency and connectivity with negligible fracture fillings. The testing of the two hypotheses does not give a clear and unequivocal answer in support of the two assumptions about groundwater flow in the study area. But most of the observed data are in agreement with the predictions from the models, and can be explained by the action of the present stress field on pre-existing fractures.  相似文献   

3D numerical modelling of fluid flow in the Val-d’Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields     

Georges Beaudoin  René Therrien  Catherine Savard 《Mineralium Deposita》2006,41(1):82-98

Fluid flow patterns have been determined using oxygen isotope isopleths in the Val-d’Or orogenic gold district. 3D numerical modelling of fluid flow and oxygen isotope exchange in the vein field shows that the fluid flow patterns can be reproduced if the lower boundary of the model is permeable, which represents middle or lower crustal rocks that are infiltrated by a metamorphic fluid generated at deeper levels. This boundary condition implies that the major crustal faults so conspicuous in vein fields do not act as the only major channel for upward fluid flow. The upper model boundary is impermeable except along the trace of major crustal faults where fluids are allowed to drain out of the vein field. This upper impermeable boundary condition represents a low-permeability layer in the crust that separates the overpressured fluid from the overlying hydrostatic fluid pressure regime. We propose that the role of major crustal faults in overpressured vein fields, independent of tectonic setting, is to drain hydrothermal fluids out of the vein field along a breach across an impermeable layer higher in the crust and above the vein field. This breach is crucial to allow flow out of the vein field and accumulation of metals in the fractures, and this breach has major implications for exploration for mineral resources. We propose that tectonic events that cause episodic metamorphic dehydration create a short-lived pulse of metamorphic fluid to rise along zones of transient permeability. This results in a fluid wave that propagates upward carrying metals to the mineralized area. Earthquakes along crustal shear zones cause dilation near jogs that draw fluids and deposit metals in an interconnected network of subsidiary shear zones. Fluid flow is arrested by an impermeable barrier separating the hydrostatic and lithostatic fluid pressure regimes. Fluids flow through the evolving and interconnected network of shear zones and by advection through the rock matrix. Episodic breaches in the impermeable barrier along the crustal shear zones allow fluid flow out of the vein field.  相似文献   

弯道超高法在泥石流流速计算中的应用——以四川省汶川县G317国道磨子沟泥石流为例     

丁明涛  陈宁生  韦方强  齐云龙 《中国地质灾害与防治学报》2006,17(3):147-149,164

选取四川省汶川至马尔康公路线的磨子沟作为试验对象,采用弯道超高法推算其泥石流流速。进而可以计算出该次泥石流的平均流量,为公路的改建工程提供设计依据。经过实地调查,用此方法计算磨子沟2005年8月17日暴发的泥石流流速为4.4m/s。同其他流速方法计算的结果相比较,前者值偏大,且偏向于工程安全值。弯道超高法可以解决泥石流观测的局限性和泥石流发生的不可重复性。此方法简便易行,对泥石流防治工程具有一定的实用价值。  相似文献   

Design of Inclined Covers with Capillary Barrier Effect     

Serge-Étienne Parent  Alexandre Cabral 《Geotechnical and Geological Engineering》2006,24(3):689-710

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.  相似文献