湖北徐家山锑矿床流体包裹体特征及其意义     

沈能平  彭建堂  袁顺达  张东亮  胡瑞忠  王国强 《矿床地质》2008,27(5):570-578

文章利用激光拉曼光谱和显微测温学方法,对湖北徐家山锑矿床成矿期的石英、重晶石和方解石中的流体包裹体进行了研究。研究表明,这些矿物中的流体包裹体主要有纯液体包裹体和液体包裹体(气相 液相)2类,其液体包裹体的气相成分为H2O±CO2±N2;石英、重晶石和方解石的均一温度分别为134~258℃、154~259℃和145~230℃,主要集中于150~200℃;流体的盐度w(NaCleq)和密度分别集中于3%~6%和0.90~0.96g/cm3。流体包裹体资料揭示出该矿床为典型的中低温热液锑矿床,其成矿流体为中低温、低盐度、中等密度热液。结合H、O、Sr、Pb同位素等研究结果,进一步推断该成矿热液主要是经深部循环演化的大气降水。  相似文献   

新疆阿尔泰蒙库铁矿床的成矿流体及成矿作用   总被引：30，自引：8，他引：22  

杨富全  毛景文  柴凤梅  刘锋  周刚  耿新霞  刘国仁  徐林刚 《矿床地质》2008,27(6):659-680

蒙库大型铁矿床赋存于上志留统—下泥盆统康布铁堡组变质火山-沉积岩系中,容矿岩石为石榴子石矽卡岩、变粒岩、浅粒岩和大理岩。矿体总体顺层分布,空间上与矽卡岩密切相关。研究表明,矽卡岩期石榴子石以发育玻璃质熔融包裹体、流体熔融包裹体和流体包裹体为特征,晚期矽卡岩阶段矿物中发育液相包裹体,变质期矿物中主要发育液相包裹体和含子矿物包裹体。矽卡岩期熔融包裹体的均一温度为1100℃,早期矽卡岩阶段流体包裹体均一温度变化于193～499℃,在450℃、350℃和230℃出现峰值。中期矽卡岩阶段均一温度变化于236～550℃,峰值为350℃。区域变质期均一温度介于132～513℃,在350℃、230℃和190℃出现峰值。流体包裹体的盐度w(NaCleq)介于1.23%～60.31%,流体密度变化于0.60～1.16g/cm3。石榴子石、石英和方解石的δ18OSMOW变化于0.2‰～8.4‰,δ18OH2O介于-5.1‰～5.33‰,δD为-127‰～-81‰,表明矽卡岩期成矿流体主要是岩浆水,混合少量大气降水;变质期流体主要为大气降水,为混合变质水。方解石δ13CPDB变化于-6.1‰～-2.3‰,表明流体中碳来自深部或地幔。成矿时代为早泥盆世早期(略晚于404～400Ma),成矿作用与矽卡岩的退化变质作用有关。  相似文献   

豫西前河构造蚀变岩型金矿成矿过程中的流体-岩石反应     

曹烨  李胜荣  申俊峰  要梅娟  李庆康  毛付龙 《矿床地质》2008,27(6):714-726

前河金矿区位于华北地台南缘,赋存在中元古界熊耳群安山岩和英安岩中,矿体受断裂破碎带控制。含矿热液在迁移过程中与围岩发生了广泛的流体-岩石反应而引起热液蚀变。本区石英中有4种类型的流体包裹体,均一温度范围为145～331℃,其中含CO2包裹体的完全均一温度主要分布在中-高温区。成矿流体的密度和压力变化范围分别是0.68～0.94g/cm3和(367.01～896.55)×105Pa。金大量沉淀成矿时的流体特征为:温度213～260℃、密度0.80～0.89g/cm3和压力(502.86～710.57)×105Pa。流体相为SO42->Na >Cl->K 型,CO2/H2O比值及N2、H2S、Ar、C2H6等挥发分的含量明显增高,f(CO2)、f(H2S)、f(CH4)和Eh值增大;f(O2)、f(H2O)和pH值减小。在青磐岩化安山岩的基础上发生的流体-岩石反应是造成本矿床金沉淀成矿的最主要原因。  相似文献   

Deciphering potential groundwater zone in hard rock through the application of GIS   总被引：6，自引：1，他引：5  

R. K. Prasad  N. C. Mondal  Pallavi Banerjee  M. V. Nandakumar  V. S. Singh 《Environmental Geology》2008,55(3):467-475

Remote Sensing and Geographic Information System has become one of the leading tools in the field of hydrogeological science, which helps in assessing, monitoring and conserving groundwater resources. It allows manipulation and analysis of individual layer of spatial data. It is used for analysing and modelling the interrelationship between the layers. This paper mainly deals with the integrated approach of Remote Sensing and geographical information system (GIS) to delineate groundwater potential zones in hard rock terrain. The remotely sensed data at the scale of 1:50,000 and topographical information from available maps, have been used for the preparation of ground water prospective map by integrating geology, geomorphology, slope, drainage-density and lineaments map of the study area. Further, the data on yield of aquifer, as observed from existing bore wells in the area, has been used to validate the groundwater potential map. The final result depicts the favourable prospective zones in the study area and can be helpful in better planning and management of groundwater resources especially in hard rock terrains.  相似文献   

Global Correlations of Ocean Ridge Basalt Chemistry with Axial Depth: a New Perspective   总被引：4，自引：0，他引：4  

Niu  Yaoling; O'Hara  Michael J. 《Journal of Petrology》2008,49(4):633-664

The petrological parameters Na₈ and Fe₈, which are Na₂O andFeO contents in mid-ocean ridge basalt (MORB) melts correctedfor fractionation effects to MgO = 8 wt%, have been widely usedas indicators of the extent and pressure of mantle melting beneathocean ridges. We find that these parameters are unreliable.Fe₈ is used to compute the mantle solidus depth (P_o) and temperature(T_o), and it is the values and range of Fe₈ that have led tothe notion that mantle potential temperature variation of T_P= 250 K is required to explain the global ocean ridge systematics.This interpreted T_P = 250 K range applies to ocean ridges awayfrom ‘hotspots’. We find no convincing evidencethat calculated values for P_o, T_o, and T_P using Fe₈ have anysignificance. We correct for fractionation effect to Mg^# = 0·72,which reveals mostly signals of mantle processes because meltswith Mg^# = 0·72 are in equilibrium with mantle olivineof Fo_89·6 (vs evolved olivine of Fo_{88·1–79·6}in equilibrium with melts of Fe₈). To reveal first-order MORBchemical systematics as a function of ridge axial depth, weaverage out possible effects of spreading rate variation, local-scalemantle source heterogeneity, melting region geometry variation,and dynamic topography on regional and segment scales by usingactual sample depths, regardless of geographical location, withineach of 22 ridge depth intervals of 250 m on a global scale.These depth-interval averages give Fe₇₂ = 7·5–8·5,which would give T_P = 41 K (vs 250 K based on Fe₈) beneathglobal ocean ridges. The lack of Fe₇₂–Si₇₂ and Si₇₂–ridgedepth correlations provides no evidence that MORB melts preservepressure signatures as a function of ridge axial depth. We thusfind no convincing evidence for T_P > 50 K beneath globalocean ridges. The averages have also revealed significantcorrelations of MORB chemistry (e.g. Ti₇₂, Al₇₂, Fe₇₂,Mg₇₂, Ca₇₂, Na₇₂ and Ca₇₂/Al₇₂) with ridge axial depth. Thechemistry–depth correlation points to an intrinsic linkbetween the two. That is, the 5 km global ridge axial reliefand MORB chemistry both result from a common cause: subsolidusmantle compositional variation (vs T_P), which determines themineralogy, lithology and density variations that (1) isostaticallycompensate the 5 km ocean ridge relief and (2) determine thefirst-order MORB compositional variation on a global scale.A progressively more enriched (or less depleted) fertileperidotite source (i.e. high Al₂O₃ and Na₂O, and low CaO/Al₂O₃)beneath deep ridges ensures a greater amount of modal garnet(high Al₂O₃) and higher jadeite/diopside ratios in clinopyroxene(high Na₂O and Al₂O₃, and lower CaO), making a denser mantle,and thus deeper ridges. The dense fertile mantle beneath deepridges retards the rate and restricts the amplitude of the upwelling,reduces the rate and extent of decompression melting, givesway to conductive cooling to a deep level, forces melting tostop at such a deep level, leads to a short melting column,and thus produces less melt and probably a thin magmatic crustrelative to the less dense (more refractory) fertile mantlebeneath shallow ridges. Compositions of primitive MORB meltsresult from the combination of two different, but geneticallyrelated processes: (1) mantle source inheritance and (2) meltingprocess enhancement. The subsolidus mantle compositional variationneeded to explain MORB chemistry and ridge axial depth variationrequires a deep isostatic compensation depth, probably in thetransition zone. Therefore, although ocean ridges are of shalloworigin, their working is largely controlled by deep processesas well as the effect of plate spreading rate variation at shallowlevels. KEY WORDS: mid-ocean ridges; mantle melting; magma differentiation; petrogenesis; MORB chemistry variation; ridge depth variation; global correlations; mantle compositional variation; mantle source density variation; mantle potential temperature variation; isostatic compensation  相似文献   

Drought and institutional adaptation in the Great Plains of Alberta and Saskatchewan, 1914–1939     

Gregory P. Marchildon  Suren Kulshreshtha  Elaine Wheaton  Dave Sauchyn 《Natural Hazards》2008,45(3):391-411

Agriculture in the southern Great Plains of Canada has been particularly vulnerable to prolonged episodes of drought. Using climate data and a precipitation minus potential evapotranspiration index, the extent of the region’s exposure to drought is examined. Between 1914 and 1917, the Dry Belt was particularly vulnerable to drought, whereas after 1928, a much larger region known as the Palliser Triangle covering most of southern Alberta and Saskatchewan was much more exposed to drought. These droughts provoked major institutional adaptation, in particular the establishment of the Special Areas Board by the Government of Alberta, and the creation of the Prairie Farm Rehabilitation Administration by the Government of Canada. Both organizations have proved to be relatively permanent public adaptations to the natural hazard of drought in the region. Moreover, these earlier experiences with prolonged drought as well as institution-building may be of value in helping the residents of the Palliser Triangle adapt to predicted climate changes in the future as well as anticipate some of the barriers to effective institutional adaptation.  相似文献   

人工合成烃类包裹体研究进展   总被引：4，自引：0，他引：4  

陈勇  葛云锦 《地质论评》2008,54(6):807-813

人工合成烃类包裹体不仅可以作为分析仪器校正的标样,还可以增进人们对烃类包裹体形成机制和水—岩作用机理的认识。人工合成包裹体的方法主要有三种：人工晶体生长法、焊封石英管法和金刚石压腔法,其中利用愈合人工石英(水晶)单晶裂隙合成流体包裹体技术已成为标准的合成技术。目前人工合成烃类包裹体主要利用晶体生长法合成,包括高温高压利用石英（或方解石）晶体生长愈合裂缝形成流体包裹体和低温下采用过饱和溶液重结晶形成流体包裹体。由于高温高压条件下烃类可能发生裂解,母液保真是成功实现人工合成烃类包裹体的重要前提条件。国外在人工合成烃类包裹体研究方面已经取得了一些重要的认识,但远不及人工合成无机体系流体包裹体研究那样系统和完善。国内关于人工合成烃类包裹体研究尚处于起步阶段,迫切需要开展这方面的研究工作。  相似文献   

邹平王家庄铜矿床成矿地球化学及成因探讨   总被引：2，自引：0，他引：2  

张军  徐兆文  李海勇  刘苏明  杨小男  陆现彩  李红超 《地质论评》2008,54(4):466-476

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。  相似文献   

渤海新近系浅水三角洲沉积体系与大型油气田勘探   总被引：32，自引：8，他引：24  

朱伟林  李建平  周心怀  郭永华 《沉积学报》2008,26(4):575-582

新近纪渤海具有构造稳定、沉降缓慢、湖泊水域范围大、内部无分割、地形平缓、坡度小等特点,广泛发育浅水三角洲,从而形成渤海海域新近系良好的储盖组合和优越的油气成藏条件。浅水三角洲砂岩储层由于受河流作用的控制,砂体具有明显的方向性,存在明显的分叉现象,与曲流河相比,砂体连通性较好,砂体等厚图呈典型的朵叶状。湖相厚层泥岩普遍发育,与浅水三角洲砂体组成多套垂向优质储盖组合。浅水三角洲发育于渤海新近纪至今处于生烃的峰期主力富烃凹陷的有利区带,新构造运动造成新近纪以来凹陷主力源岩生烃峰期与新构造运动的同步耦合,为渤海大型浅水三角洲成因的优质储层油气成藏创造了优越条件,可以形成大型油气田。因此,重视并充分挖掘渤海浅水三角洲储层类型油气藏的勘探潜力将是追求浅层优质油藏、进一步增储上产的方向所在。  相似文献   

河南洛宁段河金矿流体包裹体研究和矿床成因   总被引：2，自引：1，他引：1  

赖勇张宇高栏  李文博 《中国地质》2008,35(6):1206-1219

河南省洛宁县段河石英脉型金矿主要包括石寨沟和岭东两个矿区,分别由3～4条含金石英脉构成。矿化过程从早到晚包括石英-黄铁矿、石英-多金属硫化物和石英-碳酸盐等3个阶段．其中中阶段金矿化最强,次为早阶段。各阶段石英中流体包裹体以气液两相包裹体为主．次为纯液体包裹体。激光拉曼测试表明,气液两相包裹体的液相为H2O,气相主要为Ho和CO2混合、纯H2O,次为纯CO2;纯液体包裹体为纯H2O。石寨沟矿区包裹体均一温度从早到晚依次为240．9～315．9℃．188．7～304．5℃,137．3～259．3℃：流体盐度变化依次为（6．74～12．85）wt%NaCl．eq,（2．41～8．68）wt％NaCl．eq,（2．24-7．86）wt%NaCl．eq。岭东矿区均一温度从早到晚依次为303．7-343．1℃,251．8-325．4℃,305．7～355．0℃：流体盐度变化依次为（5．11～11．70）wt％NaCl．eq,（2．74-10．11）wt％NaCl．eq,（0．53-6．74）wt％NaCl．eq。两矿区主成矿期流体均为中温、低盐度,早阶段流体为改造热液和变质热液的混合体,含一定量CO2,且流体CO2含量和盐度从早到晚逐渐降低。石寨沟矿区包裹体均一温度逐渐降低,而岭东矿区包裹体均一温度先降后升,加之岭东矿区各阶段成矿温度均高于石寨沟矿区．表明成矿流体系统主要受岩浆热驱动,岭东矿区更靠近岩体,且在晚阶段又有脉动性的岩浆加热．段河金矿区南部存在隐伏岩体。  相似文献