基于灯光数据的京津冀城市多标度异速分析     

龙玉清  陈彦光 《地理科学进展》2019,38(1):88-100

城镇体系的时空演化是一个复杂的动力学过程,具有无尺度性,其特征可以采用异速标度指数定量描述。论文以京津冀为例,基于1992—2013年夜间灯光数据的校正结果,提取城镇夜间灯光信息,采用多标度异速分析方法,分析京津冀城镇体系的相对发展特征及其空间分异格局。研究发现：①京津冀大城市的增长空间局限日益显著。虽然大城市如京津唐的绝对发展水平高,但接近环境承载量的极限,22 a间增长快速的是大城市交接地带的小城市(如三河、迁安、廊坊等)。②相对增长速度快的城市从东北到西南呈现带状分布——政府选择发展的“雄安新区”就在这个轴带上。由此可以得出两个结论：其一,京津冀城市演化的趋势相对均衡化,空间结构异质性逐步减弱,整个城镇体系的发展趋于相对平衡状态;其二,大、小城市“两极”贯通或许是增强城镇体系功能的有效途径。京津冀的空间格局优化不能仅仅考虑主要的、规模大的中心城市,而应该基于等级结构协调整个城镇网络体系。  相似文献   

滇西动态重力网的分形特征及空间分辨力   总被引：1，自引：1，他引：0  

贾民育 《大地测量与地球动力学》1996,(4)

介绍了用分形学描述地球物理观测网非均匀分布和联合应用分形特征与Ｓｈａｎｎｏｎ定理确定最佳网格距的方法。研究了滇西动态重力网的分形特征，它的分形维Ｄｆ＝１．２７，最佳网格距ｒ０＝２８ｋｍ。讨论了１９８６年至１９９４年间网区发生的８次Ｍｓ＞５．０级地震前重力场变化的可信性，指出这些变化的波长均大于１００ｋｍ，至少２倍于网的最小空间分辨力，因而是可信的  相似文献   

地球化学景观吸引子的发现及其意义     

李长江  麻土华  徐有浪 《浙江国土资源》1995,(1)

勘查地球化学对异常评价的最大不确定性源于对地球化学景观特性的认识不够。我们应用构造相空间的方法分析了浙江儒岙幅（1:5万）水系沉积物测量的Ag含量数据，揭示了地球化学景观是具有低维吸引子（DZ≈2．9）的混饨系统。这一发现将对勘查地球化学中采样密度的选择、地球化学场模拟、异常评价等根本性问题产生重大影响。  相似文献   

On the practice of estimating fractal dimension   总被引：11，自引：0，他引：11  

James R. Carr  William B. Benzer 《Mathematical Geology》1991,23(7):945-958

Coastlines epitomize deterministic fractals and fractal (Hausdorff-Besicovitch) dimensions; a divider [compass] method can be used to calculate fractal dimensions for these features. Noise models are used to develop another notion of fractals, a stochastic one. Spectral and variogram methods are used to estimate fractal dimensions for stochastic fractals. When estimating fractal dimension, the objective of the analysis must be consistent with the method chosen for fractal dimension calculation. Spectal and variogram methods yield fractal dimensions which indicate the similarity of the feature under study to noise (e.g., Brownian noise). A divider measurement method yields a fractal dimension which is a measure of complexity of shape.  相似文献   

Heat capacity and phase equilibria of wadeite-type K2Si4O9     

Wenjun Yong  E. Dachs  A. C. Withers  E. J. Essene 《Contributions to Mineralogy and Petrology》2008,155(2):137-146

The low-temperature heat capacity (C _p) of Si-wadeite (K₂Si₄O₉) synthesized with a piston cylinder device was measured over the range of 5–303 K using the heat capacity option of a physical properties measurement system. The entropy of Si-wadeite at standard temperature and pressure calculated from the measured heat capacity data is 253.8 ± 0.6 J mol⁻¹ K⁻¹, which is considerably larger than some of the previous estimated values. The calculated phase transition boundaries in the system K₂O–Al₂O₃–SiO₂ are generally consistent with previous experimental results. Together with our calculated phase boundaries, seven multi-anvil experiments at 1,400 K and 6.0–7.7 GPa suggest that no equilibrium stability field of kalsilite + coesite intervenes between the stability field of sanidine and that of coesite + kyanite + Si-wadeite, in contrast to previous predictions. First-order approximations were undertaken to calculate the phase diagram in the system K₂Si₄O₉ at lower pressure and temperature. Large discrepancies were shown between the calculated diagram compared with previously published versions, suggesting that further experimental or/and calorimetric work is needed to better constrain the low-pressure phase relations of the K₂Si₄O₉ polymorphs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献   

一种计算台风风场的方法     

陈孔沫 《热带海洋学报》1994,(2)

揭示Ｒａｎｋｉｎｅ涡风场模式和Ｊｅｌｅｓｎｉａｎｓｋｉ风场模式之间的联系，并设计了一种台风风场分布模式，它的风速分布曲线落在Ｊｅｌｅｓｎｉａｎｓｋｉ和Ｒａｎｋｉｎｅ涡两个风场模式的风速分布曲线之间，具有一个既优于Ｊｅｌｅｓｎｉａｎｓｋｉ又优于Ｒａｎｋｉｎｅ涡的风速衰减速率，因此它同时克服了Ｒａｎｋｉｎｅ涡模式计算风速偏小和Ｊｅｌｅｓｎｉａｎｓｋｉ模式计算风速偏大的缺点，以一种比较合理的变化趋势向远方衰减，成为一个比较切合实际的台风风场分布模式。同时，文中提出的移行台风风场计算方法对宫崎正卫、上野武夫和Ｊｅｌｅｓｎｉａｎｓｋｉ模式都有一定的改进。  相似文献   

多波束数据的海底数字地形模型构建   总被引：11，自引：0，他引：11  

高金耀  金翔龙  吴自银 《海洋通报》2003,22(1):30-38

提出大批量多格式原始多波束数据的DTM构建方法，以满足大区域、大比例尺海底地形制图的需要。在多种格式原始多波束数据接口和系统内部标准数据结构的基础上，通过对数据文件、数据种类和数据运算量的有效组织管理，实施边读入、边权重配赋的网格插值，分析了高斯、指数和距离平方反比权重函数的适用性，及最小值、最大值和平均值的实用性。在权重配赋网格插值基础上，提出分形fBM和张力样条配合使用的方程式插值方法，保证DTM数据的有效外延和地形分辨。整套算法效率高，并能有效保证DTM的精度，对存储在外部介质的数据遍历一次即可完成网格插值。  相似文献   

水动力条件差异导致潮坪分形特征变化实例研究   总被引：8，自引：0，他引：8       下载免费PDF全文

贾永刚  付元宾  许国辉  单红仙  曹雪晴 《海洋学报》2003,25(3):59-67

研究区位于1964～1976年黄河由刁口流路入海时形成的三角洲潮坪.为进行石油开采在潮坪上构筑的交通设施对波浪形成了良好的屏障,水动力条件具有显著差异的屏障两侧潮坪是研究潮坪特征对水动力条件响应的天然实验场所.在屏障两侧各选择一典型区,实测地貌形态,取样品进行粒度成分分析,根据实测资料分析确定潮坪分形特征.发现水动力环境的强弱决定着潮坪的形貌、沉积物粒度分维值的变化规律.水动力环境强的一侧潮坪滩面分维值高,且随着初始计算网格宽度增大迅速降维;表层沉积物粒度分维值小,且离散性大.相反,在另一侧潮坪滩面分维值低,且随着初始计算网格宽度增大分维值无显著变化;表层沉积物粒度分维值高,且具有较好的一致性.当初始计算网格宽度增大到某个值时,两侧潮坪形貌分维值渐趋一致.在屏障两侧各沿一条与屏障大角度相交的测线取样,并各选择一点采取不同深度的样品做分析计算,发现在水动力条件弱的一侧,样品的粒度分维值表现为远离屏障逐步降维、随深度增加分维值增大的规律;相反一侧粒度分维值变化的规律性很不明显.讨论了水动力环境对潮坪分形特征影响机理.  相似文献   

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover     

Xuefeng Chen  Yucheng Li  Bin Teng 《Coastal Engineering》2007

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.  相似文献