浅议基于像素工厂的ADS 80影像处理技术     

周晓敏  杨爱玲  孙丽梅  曹广强 《东北测绘》2012,(5):146-148,153

摄影测量进入数字时代以来,ADS80因其独特的优势逐步成为航摄影像获取的主流平台,对ADS80数据后续快速处理也成为目前数据处理软件研究的重点。本文介绍了基于像素工厂系统快速处理ADS80数据的技术流程和数据处理的主要技术环节,总结了像素工厂系统数据处理的优劣势。通过实际项目实践,验证了基于像素工厂系统处理ADS80数据的可靠性与高效性。  相似文献   

ADS 80数码航摄仪L0级影像后处理试验     

郑福海  曲平  姜淼  王铁军 《测绘软科学研究》2012,(5):75-80

介绍了三线阵数码航摄仪ADS 80,探讨了其Level 0级影像的后处理技术,分析了不同软件在相同地面分辨率下不同地面控制条件下的后处理精度。得出的结论是控制点分布、数量、位置和航摄影像地面分辨率对ADS 80相机L0级影像空三解算和生成的L1级影像精度影响较大;在充分考虑以上因素的情况下,ADS 80相机在获取的航摄影像地面分辨率低于成图比例尺要求时仍能得到较高的校正精度。  相似文献   

俯冲带中大理岩与榴辉岩的Mg-Fe-C-O同位素迁移     

闫伟豪  王勤  李伟强 《地质学报》2022,96(2):500-516

碳酸盐岩和碳酸盐化岩石是俯冲带中碳的主要地质载体.俯冲-折返的超高压变质岩记录了俯冲隧道中流体-岩石的相互作用与元素迁移,是研究地球内部元素循环的重要媒介.本文采集了大别造山带罗家岭互层状产出的大理岩和榴辉岩,建立了横跨岩性界面的矿物组成、显微结构和Mg-Fe-C-O同位素剖面.大理岩中主要组成矿物为白云石,其次为方解...  相似文献   

54与80坐标系转换数学模型研究   总被引：3，自引：0，他引：3  

张书煌 《福建地质》2004,23(1):9-20

54北京坐标系与80西安坐标系转换计算,属54系与80系不同参考椭球下高斯—克吕格投影数据转换计算,因全国不同区域重力场的变化而无法用一个固定的参数或公式推算,能否另辟途径实现其精确算法。应用多元统计分析基础理论,研究二者互换随机数学模型,以福建省区域为例,成功实现大批数据坐标转换。  相似文献   

复杂航摄资料的ADS80影像空三加密处理与分析     

吴立果 《测绘与空间地理信息》2017,(10):180-181

从省级基础测绘项目的实践出发,以临夏测区为例,对复杂航摄资料的ADS80影像数据空三加密处理技术进行论述,对不同加密方法的精度情况进行对比并分析其原因。  相似文献   

A new, automatic hydrothermal fluid sampler using a shape-memory alloy   总被引：2，自引：0，他引：2  

Takeshi Naganuma  Masanori Kyo  Tatsuhiko Ueki  Kazuhiko Takeda  Jun-ichiro Ishibashi 《Journal of Oceanography》1998,54(3):241-246

A new hydrothermal fluid sampler has been developed to provide more maneuverability in underwater operation. The sampler characteristically employs a shape-memory alloy, which senses high temperature and actuates the suction mechanism. A shape-memory alloy is also used to switch the intake valve of the sampler, the intention being to avoid missampling when the inlet is in low temperature water. Prototype samplers were designed to collect the fluids hotter than 80°C. Test sampling was performed at hydrothermal vents (1372–1374 m deep) in the submarine volcano, Suiyo Seamount, Izu-Bonin Arc, northwestern Pacific. Observed fluid temperature was between 138 and 298°C, while the ambient seawater temperature was 3.1°C. Each prototype collected about 100 ml fluid as designed. The magnesium concentration in the samples indicated a seawater content of 47.5–90.8%, which indicates the entrainment of ambient seawater. Microscopic observatinn revealed the occurrence of microorganisms in the sample fluids at a population density of 10⁵ to 10⁶ cells ml⁻¹, which is 2–3 orders of magnitude higher than those in seawater at that depth. The use of the newly developed fluid sampler will greatly facilitate the collection of vent-associated microorganisms, which are of potential biological and biotechnological interest.  相似文献   

多维地震作用下大跨空间结构的减震控制分析          下载免费PDF全文

赵祥  刘忠华  王社良  杨涛  展猛 《地震工程学报》2018,40(3):398-405

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素,以钻柱组合设计为基础准则,从特深孔钻探工程技术需求出发,开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h,2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h;2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金,在高温瞬时条件下的力学性能劣于2618铝合金;2219铝合金中含有Zr,该元素在热暴露过程中起到减缓溶质扩散速率的作用,这对提高热暴露后的剩余强度是有利的。  相似文献   

广西宜州裂陷槽晚古生代演化与早石炭世沉积锰矿分布^*     

黄恒  颜佳新  余文超 《古地理学报》2020,22(5):1001-1011

滇黔桂地区晚古生代浅水碳酸盐岩台地与深水硅泥质盆地共存的古地理格局,是在加里东期褶皱基底上发生裂陷及差异沉降而发展起来的。广西宜州—柳州一带既是晚古生代上扬子碳酸盐岩地台南缘1条重要的沉积相分界线,也是晚古生代桂中和桂北地层分区、古生代—中生代雪峰山南段构造体系和桂中坳陷构造体系的分界线。文中通过对宜山—柳州一带晚古生代地层的区域对比和成因分析,恢复了桂中宜山—柳州地区晚古生代沉积盆地的演化历史。狭长型宜州裂陷槽盆地西起丹池断裂,向东经龙头、北牙、宜州延伸至柳州。自中泥盆世开始,首先在东西两端开始裂陷下沉,至早石炭世发展成型。受北侧来自江南隆起带陆源碎屑物质充填影响,其表现为南北不对称并在早石炭世晚期被填平。在宜州裂陷槽内发育多处早石炭世沉积型碳酸锰矿,含矿地层分布、地层序列及其沉积背景明显与裂陷槽演化有关。它们既是盆地演化历史的见证,也体现了桂中地区裂陷海槽的特色,值得在后续锰矿成因研究中予以重视。  相似文献