Optimal design of superelastic‐friction base isolators for seismic protection of highway bridges against near‐field earthquakes     

Osman E. Ozbulut  Stefan Hurlebaus 《地震工程与结构动力学》2011,40(3):273-291

The seismic response of a multi‐span continuous bridge isolated with novel superelastic‐friction base isolator (S‐FBI) is investigated under near‐field earthquakes. The isolation system consists of a flat steel‐Teflon sliding bearing and a superelastic NiTi shape memory alloy (SMA) device. The key design parameters of an S‐FBI system are the natural period of the isolated bridge, the yielding displacement of the SMA device, and the friction coefficient of the sliding bearings. The goal of this study is to obtain optimal values for each design parameter by performing sensitivity analysis of a bridge isolated by an S‐FBI system. First, a three‐span continuous bridge is modeled as two‐degrees‐of‐freedom with the S‐FBI system. A neuro‐fuzzy model is used to capture rate‐ and temperature‐dependent nonlinear behavior of the SMA device. Then, a set of nonlinear time history analyses of the isolated bridge is performed. The variation of the peak response quantities of interest is shown as a function of design parameters of the S‐FBI system and the optimal values for each parameter are evaluated. Next, in order to assess the effectiveness of the S‐FBI system, the response of the bridge isolated by the S‐FBI system is compared with the response of the non‐isolated bridge and the same bridge isolated by pure‐friction (P‐F) sliding isolation system. Finally, the influence of temperature variations on the performance of the S‐FBI system is evaluated. The results show that the optimum design of a bridge with the S‐FBI system can be achieved by a judicious specification of design parameters. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

新疆金山金矿床中Cu-Zn合金矿物的发现及其地质意义     

杨隆勃  刘家军  朱亿广  朱炳玉 《矿物学报》2011,31(1):1-8

在研究新疆金山金矿床物质组分的过程中,通过对矿石矿物进行反光显微镜下观察与电子探针分析,发现了Cu-Zn合金矿物。与国内外已发现的Cu-Zn合金矿物相比,所发现的Cu-Zn合金矿物中Cu含量(81.35%～85.36%,平均83.75%)较高,Zn含量(6.08%～10.10%,平均为7.39%)较低,并含少量的Sn(4.13%～6.75%,平均为5.23%)、Ni(0.88%～1.38%,平均为1.05%),属于为α相Cu-Zn合金矿物。Cu-Zn合金矿物在自然界极为罕见,其生成条件也很独特。结合金山金矿成矿特征和形成条件,作者认为该Cu-Zn合金矿物是在热液成矿晚阶段(第Ⅳ阶段)强还原条件下的缺氧、缺硫环境中形成的。  相似文献   

Test method of cavitation erosion for marine coatings with low hardness     

Bu-Geun Paik  Ki-Sup Kim  Jong-Woo Ahn  Kyung-Rae Kim  Sang-Uk Lee 《Ocean Engineering》2011,38(13):1495-1502

Rudders of large container ships are easily affected by cavitation, which is well known to be induced by significant axial flows behind a propeller and discontinuities in the rudder. Among several methods to prevent or reduce the cavitation erosion occurred in the rudder, painting is gaining a lot of attention because it can be employed easily and cheaply. To conduct erosion tests properly, the simulation of heavily erosive cavitation is necessary. This can be generated using an inclined propeller dynamometer in the medium-size cavitation tunnel of MOERI (Maritime & Ocean Engineering Research Institute). The inclined shaft of the propeller creates strong cavitation, which occurs around the root of the propeller blade. This cavitation creates impacts through the collapsing process that are very severe, and are useful for realistic and efficient cavitation erosion tests. In the present study, the newly developed cavitation erosion test method is successfully employed to evaluate marine coatings that is mainly composed of epoxy elastomer or silicone polymer material. Silicone polymer-type paint B was found to have three times larger endurance than epoxy elastomer-type paint A.  相似文献   

氧分压对Ni-Cr-Fe合金氧化成膜特性影响的研究     

李厚敏  初蕾  刘英才  梁丹维 《中国海洋大学学报(自然科学版)》2011,(Z1):267-271

以铸态Ni-Cr-Fe合金为试样,于1 050℃湿氢气氛下恒温氧化20 h。通过氧化增重、SEM/EDS以及薄膜X-射线衍射等方法研究了氧分压对该合金在弱氧化性气氛下氧化成膜特性的影响。结果表明:表面氧化膜从外到内氧化物组成依次为:MnCr2O4、Cr2O3以及SiO2。氧化膜的厚度、组成及形貌与体系的氧分压密切相关,中等氧分压(15.9×10-18atm)有利于表面尖晶石的形成;较低氧分压有利于形成厚而多孔的氧化膜,而高氧分压则趋向于形成薄而致密的氧化膜。  相似文献   

螺杆钻具转子表面磨损规律研究          下载免费PDF全文

岳伟民  史新慧  黄玉文  翁炜  赵志涛 《探矿工程》2013,40(10):46-48，63

转子是螺杆钻具的核心部件,与定子相配合,决定了螺杆钻具的工作效率和动力性能。主要研究不同泥浆固相含量和添加剂对螺杆钻具转子表面磨损的影响,并设计了专用试验装置以模拟近井下条件工作时螺杆钻具转子的表面磨损情况,对其磨损规律开展研究,探索了转子在不同泥浆条件下的磨损规律,并结合相关磨损机理进行了进一步分析。初步发现了对硬铬镀层损伤较大的因素是泥浆固相与盐类添加剂,进而确定了硬铬镀层磨损的主要形式是腐蚀磨损,从而形成了对转子的制造工艺及使用方法的有益建议。  相似文献   

Phase relations of iron and iron–nickel alloys up to 300 GPa: Implications for composition and structure of the Earth's inner core     

Yasuhiro Kuwayama  Kei Hirose  Nagayoshi Sata  Yasuo Ohishi 《Earth and Planetary Science Letters》2008,273(3-4):379-385

We have investigated the phase relations of iron and iron–nickel alloys with 18 to 50 wt.% Ni up to over 300 GPa using a laser-heated diamond-anvil cell. The synchrotron X-ray diffraction measurements show the wide stability of hcp-iron up to 301 GPa and 2000 K and 319 GPa and 300 K without phase transition to dhcp, orthorhombic, or bcc phases. On the other hand, the incorporation of nickel has a remarkable effect on expanding the stability field of fcc phase. The geometry of the temperature–composition phase diagram of iron–nickel alloys suggests that the hcp–fcc–liquid triple point is located at 10 to 20 wt.% Ni at the pressure of the inner core boundary. The fcc phase could crystallize depending on the nickel and silicon contents in the Earth's core, both of which are fcc stabilizer.  相似文献   

石墨炉原子吸收光谱法测定镁基合金中的铍和镍     

牛娜  何超君  凌爽 《地质与资源》2009,18(2):155-156,160

采用石墨炉原子吸收光谱法测定镁基合金中的铍和镍.研究并校正了基体对待测元素的影响.方法简单、快速.对含铍11.4×10^-6、镍9.25×10^-6的样品11份测定,相对标准偏差分别为3.5%、4.3%,铍、镍回收率分别为98.8%、97.5%.  相似文献   

块金成因新见及其分级   总被引：6，自引：0，他引：6  

郑大中  郑若锋 《江西地质》2000,14(4):300-305

本文描述了块金的形成新机制。在热液中呈金氢化物、金羰基化合物及纳料金粒子、纳米金合金粒子活化迁移。在表生条件下,金硫代硫酸盐配合物、金粒子、金合金粒子是金迁移的主要形式。块金是地质的、化学的、物理的、生物化学的综合作用的结果。按块金成因分为内生块金和次生块金。按单块块金质量分为４级。  相似文献   

A new, automatic hydrothermal fluid sampler using a shape-memory alloy   总被引：2，自引：0，他引：2  

Takeshi Naganuma  Masanori Kyo  Tatsuhiko Ueki  Kazuhiko Takeda  Jun-ichiro Ishibashi 《Journal of Oceanography》1998,54(3):241-246

A new hydrothermal fluid sampler has been developed to provide more maneuverability in underwater operation. The sampler characteristically employs a shape-memory alloy, which senses high temperature and actuates the suction mechanism. A shape-memory alloy is also used to switch the intake valve of the sampler, the intention being to avoid missampling when the inlet is in low temperature water. Prototype samplers were designed to collect the fluids hotter than 80°C. Test sampling was performed at hydrothermal vents (1372–1374 m deep) in the submarine volcano, Suiyo Seamount, Izu-Bonin Arc, northwestern Pacific. Observed fluid temperature was between 138 and 298°C, while the ambient seawater temperature was 3.1°C. Each prototype collected about 100 ml fluid as designed. The magnesium concentration in the samples indicated a seawater content of 47.5–90.8%, which indicates the entrainment of ambient seawater. Microscopic observatinn revealed the occurrence of microorganisms in the sample fluids at a population density of 10⁵ to 10⁶ cells ml⁻¹, which is 2–3 orders of magnitude higher than those in seawater at that depth. The use of the newly developed fluid sampler will greatly facilitate the collection of vent-associated microorganisms, which are of potential biological and biotechnological interest.  相似文献   

多维地震作用下大跨空间结构的减震控制分析          下载免费PDF全文

赵祥  刘忠华  王社良  杨涛  展猛 《地震工程学报》2018,40(3):398-405

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。  相似文献