基于噪声谱比法的内蒙古西部地区台站场地响应研究     

张珂  王鑫  王树波  张红才  宋晓燕 《大地测量与地球动力学》2020,40(6):646-651

利用内蒙古西部12个台站的地脉动噪声数据，采用噪声谱比法研究台站的场地响应情况。分析表明，台站场地响应按曲线形态可分为3类，且可能受地形地貌、局部构造和台基状况等条件影响。对比分析噪声谱比法与Moya方法的场地响应结果发现，场地响应曲线形态基本一致，只有极少数台站存在明显差异。结果表明，内蒙古西部区域大部分台站的台基状况总体较好，场地响应曲线较为平坦，无明显频率放大点。  相似文献   

合并会计报表的电算编制方法探讨     

孙艳玲 《成都信息工程学院学报》2003,18(4):433-440

利用用友软件对如何合并会计报表进行了初步研究，并以案例的形式阐明了采用用友软件实现合并会计报表的步骤，提出了合并会计报表的编制方法。  相似文献   

大同—阳高Ms6.1地震前兆综合加权信息熵的变化     

张昭栋  刘章增  赵会蓬 《大地测量与地球动力学》2002,22(1):51-55

利用“地震预报计算机专家系统”的思想对大同 -阳高 Ms6 .1地震前每一前兆异常事件进行综合评估 ,以每一异常的最可能发震时间来计算发震概率 ,利用地震前兆综合加权信息熵研究了系统熵值与地震的关系。对华北地区的地震前兆综合加权信息熵研究表明 ,在大同 -阳高 Ms6 .1地震前 ,信息熵出现了明显的减熵有序变化  相似文献   

轴对称稳恒磁场的一种解法     

孙新民  丁世荣 《地球科学与环境学报》1997,(2)

本文依据稳恒磁场中的高斯定理和安培环路定理，用迭代法推导出对称轴上的磁感应强度与空间任意一点磁感应强度的关系式，从而可得出轴对称稳恒磁场的无电流分布空间的解式。  相似文献   

观驾山—黑岛一带信息量法找金研究     

简文星  吕贻峰  秦松贤  刘吉平 《国土资源》1996,(2)

本文以成矿地质模型为依据，对观驾山—黑山岛一带的化探、物探、遥感及地质等信息变量进行了详细的分析，选取了１０个信息变量２４个标志状态；在此基础上，运用信息量法对研究区内４５８个单元的信息量值进行计算，并由此确定了研究范围内的成矿远景区。事实表明，研究区信息量成矿预测是非常有效的  相似文献   

关于改进的Encke方法中参考轨道的选择和校正     

刘林  胡松杰 《天文学报》1996,37(3):285-293

对于改进的Ｅｎｃｋｅ方法，选择适当的参考轨道是一个关键．然而，对于人造地球卫星长弧轨道计算，目前所给出的几种参考轨道均需要逐段校正，这将给定轨问题带来附加的复杂性．本文将仔细探讨如何选择参考轨道和减少校正次数．  相似文献   

基于噪声随机模型的加权观测融合方法     

黄贤源  隋立芬  范玉茹 《测绘学院学报》2009,(1)

信息融合技术中,在各局部传感器的有色观测噪声为一阶AR模型的情况下,可以利用观测扩增方法消除有色噪声的影响,得到最优加权观测融合方程,从而实现状态的最优滤波解。对于有色观测噪声为MA或ARMA模型的情况,观测扩增方法不再适用。提出了基于有色观测噪声随机模型级数展开的方法,求解出各局部传感器有色观测噪声的方差,并利用该方差对加权观测融合滤波器进行了构造。通过计算实例证明,该方法不仅适用于观测噪声为AR模型,同时适用于噪声MA或ARMA模型。  相似文献   

P‐wave transmission across fractures with nonlinear deformational behaviour     

X. B. Zhao  J. Zhao  J. G. Cai 《国际地质力学数值与分析法杂志》2006,30(11):1097-1112

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Transient‐state groundwater flow in various geometries with wells at arbitrary positions: analytical methods     

M. W. Roth  C. M Wilson  M. Z. Iqbal 《水文研究》2003,17(17):3519-3530

We have developed a method for analytically solving the porous medium flow equation in many different geometries for horizontal (two‐dimensional), homogeneous and isotropic aquifers containing impermeable boundaries and any number of pumping or injection wells located at arbitrary positions within the system. Solutions and results are presented for rectangular and circular aquifers but the method presented here is easily extendible to many geometries. Results are also presented for systems where constant head boundary conditions can be emulated internal to the aquifer boundary. Recommendations for extensions of the present work are briefly discussed. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application     

Daichao Sheng  David W. Smith  Scott W. Sloan  Antonio Gens 《国际地质力学数值与分析法杂志》2003,27(9):767-790

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献