Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

湖南仁里稀有金属矿田36号伟晶岩地球化学特征、成矿时代及其意义     

黄小强  李鹏  张立平  刘翔  黄志飚  柳清琦  李建康  周芳春  苏俊男  曾乐  万海辉  陈虎 《矿床地质》2021,40(6):1248-1266

位于幕阜山岩体西南缘的仁里稀有金属矿田是近年来华南地区新发现的一处重要花岗伟晶岩型稀有金属矿产地,铌钽矿体赋存于岩体内外接触带伟晶岩中,具有明显成矿分带性.文章选取仁里矿床岩体内接触带36号伟晶岩脉为研究对象,开展伟晶岩的地球化学及云母Ar-Ar年代学研究,探讨其与花岗岩围岩成因关系及岩体内接触带伟晶岩的成岩成矿时代,以丰富仁里矿田稀有金属成矿作用研究.研究表明,36号伟晶岩具高硅(w(SiO2)为72.87％～76.21％)、高铝(w(Al2O3)为13.69％～15.14％)、低钙镁铁、相对富碱(w(Na2O+K2O)为6.59％～8.33％)、(高钾)钙碱性及过铝质特征;微量元素总体富集Nb、Ta、Hf、U等高场强元素(HFSE),相对亏损Ba、Sr等离子亲石元素(LILE);稀土元素总量(ΣREE)13.95×10-6～71.63×10-6,轻稀土元素富集,重稀土元素亏损,具壳源特征.白云母Ar-Ar坪年龄为早白垩世(136.6±1.4)Ma,成矿作用发生于仁里矿田稀有金属大规模成矿的早阶段.地球化学及矿物学特征显示,36号伟晶岩与花岗岩围岩具有良好的演化关系,结合野外观察现象及成岩年龄,认为36号伟晶岩为花岗质岩浆侵位后残余岩浆结晶分异的产物,母岩为中粗粒片麻状黑云母二长花岗岩.  相似文献   

模式内部变率引起的1.5℃和2℃升温阈值出现时间模拟的不确定性研究     

季涤非  刘利  李立娟  孙超  于馨竹  李锐喆  张诚  王斌 《气候变化研究进展》2019,15(4):343-351

模式内部变率是模拟结果不确定性的重要来源,然而它对于1.5℃和2℃升温阈值出现时间不确定性的影响尚不清楚。因此,基于耦合模式比较计划第五阶段(CMIP5)的多模式数据研究了模式内部变率对1.5℃和2℃升温阈值出现时间不确定性的影响以及对未来排放情景的敏感性。结果表明,模式内部变率对升温阈值出现时间模拟的影响与外强迫的影响相当,单个模式内部不同成员达到全球平均1.5℃或2℃增温的年份相差2~12年;其影响具有明显的空间差异,影响极大值出现在欧亚大陆以北洋面、白令海峡周围区域、北美东北部及其与格陵兰岛之间的海域、南半球高纬地区等;低排放情景下模式内部变率的影响大于高排放情景。  相似文献   

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds          下载免费PDF全文

K. Huang  A. Ghassemi 《国际地质力学数值与分析法杂志》2016,40(17):2293-2311

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds     

K. Huang  Z. Zhang  Ahmad Ghassemi 《国际地质力学数值与分析法杂志》2013,37(13):2021-2038

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach     

Tony Khalil  Nadia Saiyouri  Bogdan Muresan  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2013,37(5):491-502

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Topographic instability and multiple equilibria on an f-plane     

P. F. Linden 《地球物理与天体物理流体动力学》2013,107(3-4):163-182

Abstract

The flow of a two-layer flow in a rotating channel on an f-plane over topography with sinusoidal variation of height in a direction parallel to the flow is investigated. When the two layers flow in opposite directions a resonance is found when the topographic scale matches the free mode of the system. We examine the stability of the forced mode in the vicinity of this resonance by means of a perturbation expansion of the topographic height. Both subresonant and super-resonant instabilities are found and their equilibration is examined. For small values of the dissipation multiple equilibria are found. The topographic drag releases potential energy even when the flow is baroclinically stable.  相似文献   

On induction effects at EISCAT and IMAGE magnetometer stations     

Ari Viljanen  Kirsti Kauristie  Kari Pajunpää 《Geophysical Journal International》1995,121(3):893-906

  相似文献   

遥测地震台网实时处理系统          下载免费PDF全文

刘凤祥 《地震工程学报》1994,16(3):73-77

本文介绍了采用程序驻留内存技术，利用系统的硬件中断和时钟中断，在微机上研制成功了实时处理系统。该系统具有前后台处理功能，能够在主机ＣＰＵ中同时运行多道程序，使数据采集、事件检测、数据转存、地震定位等均能进行实时处理。该系统可用于区域遥测地震台网和地方遥测地震台网的实时处理。  相似文献   

陆地卫星五号TM图像系统纠正产品的几何精度分析     

王新民  章蕾 《遥感学报》1989,(4)

为了鉴定陆地卫星5号系统纠正TM图像产品的精度,我们以1:5万地形图为基准,对四景TM图像作了精度分析。结果表明,系统纠正后的TM图像产品,内部几何精度相当好,有较小的旋转、比例误差。采用一阶多项式即可建立TM图像和地形图之间的几何关系,其误差为1个像元左右。TM图像的大地绝对误差,可通过将整个TM图像沿x,y方向平移的方法来加以校正。  相似文献