利用3S技术及三维激光扫描仪进行耕地损毁勘测     

林学艺 《测绘与空间地理信息》2016,(2):88-90

利用RS技术发现耕地损毁,网络RTK测量耕地损毁范围及面积,GIS提取耕地被损毁前的分类面积和等别,以及利用网络RTK配合Maptek I-Site8810三维激光扫描仪重构损毁耕地三维模型。  相似文献   

地面三维激光扫描仪测量误差检定     

代志宇  肖昭然  王力  杨文峰 《测绘与空间地理信息》2016,(7):79-81

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。  相似文献   

三维激光扫描技术在曲面模型重建中的应用     

杨忞婧  刘丽  张金兰  王阳 《测绘与空间地理信息》2016,(8)

利用地面三维激光扫描仪对目标物体表面进行多方位、多角度的扫描,可以获取其表面大量且密集的高精度点的三维坐标信息以及反射率信息,将这些信息存储到电脑中,使用专业软件进行处理,再使用建模软件生成建筑物的三维模型。本文所研究的是使用地面三维激光扫描仪,通过高速激光测量方式,快速、全面、精确地获取建筑物表面的三维信息,经过一系列的点云数据处理及模型处理,最终完成曲面模型三维重建的过程。  相似文献   

浅析运营期间电力隧道自动化监测技术     

罗静  卢凌燕  任卫波  许业霞 《测绘与空间地理信息》2016,(8):204-206

针对城市电力隧道结构、走向多变、电缆设施多、电磁干扰大等因素,常规的监测方法难以顺利完成的现状,对目前先进的3种隧道结构自动化监测系统进行深入的研究比较,光纤传感自动技术解决了电力隧道结构监测点布设困难,数据受电磁干扰大的问题,能实时有效、可靠、高精度地监控电力隧道,及时掌握隧道的应力、应变及振动等主要结构参数,确保隧道结构安全。研究对类似的城市电力隧道自动化监测具有一定的参考意义。  相似文献   

基于3D激光扫描的变形监测技术研究     

王士玉  耿奕超 《测绘与空间地理信息》2016,(6):180-181

传统基于GPS和全站仪的地表变形监测手段由于监测点少,难以对滑坡体进行整体监测,本文提出基于点云所成模型间比较的变形信息提取方法,结合试验验证了算法的效果。结果表明,地面三维激光扫描技术应用于变形监测领域是完全可行的,虽然其在测量精度上略低于GPS、全站仪等传统监测手段,但对大范围区域快速、连续、全方位监测的优势是其他监测手段所不具备的。  相似文献   

Iron isotopic systematics of UHP eclogites respond to oxidizing fluid during exhumation   总被引：1，自引：0，他引：1       下载免费PDF全文

D.‐Y. Li  Y. L. Xiao  W.‐Y. Li  X. Zhu  H. M. Williams  Y.‐L. Li 《Journal of Metamorphic Geology》2016,34(9):987-997

The iron stable isotope compositions (δ⁵⁶Fe) and iron valence states of ultrahigh‐pressure eclogites from Bixiling in the Dabie orogen belt, China, were measured to trace the changes of geochemical conditions during vertical transportation of earth materials, for example, oxygen fugacity. The bulk Fe³⁺/ΣFe ratios of retrograde eclogites, determined by Mössbauer spectroscopy, are consistently higher than those of fresh eclogites, suggesting oxidation during retrograde metamorphism and fluid infiltration. The studied eclogites (five samples) display limited mid‐ocean ridge basalts (MORB)‐like (~0.10‰) δ⁵⁶Fe values, which are indistinguishable from their protoliths, that is, gabbro cumulates formed through differentiation of mantle‐derived basaltic magma. This suggests that Fe isotope fractionation during continental subduction is limited. Garnet separates display limited δ⁵⁶Fe variation ranging from ?0.08 ± 0.07 ‰ to 0.02 ± 0.07‰, whereas coexisting omphacite displays a large variation of δ⁵⁶Fe values from 0.15 ± 0.07‰ to 0.47 ± 0.07‰. Omphacite also has highly variable Fe³⁺/ΣFe ratios from 0.367 ± 0.025 to 0.598 ± 0.024, indicating modification after peak metamorphism. Omphacite from retrograde eclogites has elevated Fe³⁺/ΣFe ratios (0.54–0.60) compared to that from fresh eclogites (~0.37), whereas garnet displays a narrow range of ferric iron content with Fe³⁺/ΣFe ratios from 0.039 ± 0.013 to 0.065 ± 0.022. The homogenous δ⁵⁶Fe values and Fe³⁺/ΣFe ratios of garnet suggest that it survived the retrograde metamorphism and preserved its Fe‐isotopic features and ferric contents of peak metamorphism. Because of similar diffusion rates of Fe and Mg in garnet and omphacite, and constant Δ²⁶Mg_{omphacite‐garnet} values (1.14 ± 0.04‰), equilibrium iron isotope fractionation between garnet and omphacite was probably achieved during peak metamorphism. Elevated Fe³⁺/ΣFe ratios of omphacite from retrograde eclogites and variant Δ⁵⁶Fe_{omphacite‐garnet} values of the studied eclogites (0.13 ± 0.10‰ to 0.48 ± 0.10‰) indicate that oxidized geofluid infiltration resulted in the elevation of δ⁵⁶Fe values of omphacite during retrograde metamorphism.  相似文献   

Reflectance spectroscopic characterisation of mineral alteration footprints associated with sediment-hosted gold mineralisation at Mt Olympus (Ashburton Basin,Western Australia)     

M. Wells  C. Laukamp  E. Hancock 《Australian Journal of Earth Sciences》2016,63(8):987-1002

Hydrothermal ore deposits are typically characterised by footprints of zoned mineral assemblages that extend far beyond the size of the orebody. Understanding the mineral assemblages and spatial extent of these hydrothermal footprints is crucial for successful exploration, but is commonly hindered by the impact of regolith processes on the Earth's surface. Hyperspectral drill core (HyLogger?-3) data were used to characterise alteration mineralogy at the Mt Olympus gold deposit located 35 km southeast of Paraburdoo along the Nanjilgardy Fault within the northern margin of the Ashburton Basin in Western Australia. Mineralogy interpreted from hyperspectral data over the visible to shortwave (400–2500 nm) and thermal (6000–14500 nm) infrared wavelength ranges was validated with X-ray diffraction and geochemical analyses. Spaceborne multispectral (ASTER) and airborne geophysical (airborne electromagnetic, AEM) data were evaluated for mapping mineral footprints at the surface and sub-surface. At the deposit scale, mineral alteration patterns were identified by comparing the most abundant mineral groups detected in the HyLogger data against lithology logging and gold assays. Potential hydrothermal alteration phases included Na/K-alunite, kaolin phases (kaolinite, dickite), pyrophyllite, white mica, chlorite and quartz, representing low-T alteration of earlier greenschist metamorphosed sediments. The respective zoned mineral footprints varied depending on the type of sedimentary host rock. Siltstones were mainly characterised by widespread white-mica alteration with proximal kaolinite alteration or quartz veining. Sandstones showed (1) distal white mica, intermediate dickite, and proximal alunite + kaolinite or (2) widespread white-mica alteration with associated intervals of kaolinite. In both, sandstones and siltstones, chlorite was distal to gold mineralisation. Conglomerates showed distal kaolinite/dickite and proximal white-mica/dickite alteration. Three-dimensional visualisation of the gold distribution and spatially associated alteration patterns around Mt Olympus revealed three distinct categories: (1) several irregular, poddy, SE-plunging zones of >0.5 ppm gold intersected by the Zoe Fault; (2) sulfate alteration proximal to mineralisation, particularly on the northern side of the Mt Olympus open pit; and (3) varying Al^IVAl^VISi^IV_–1(Mg,Fe)^VI_–1 composition of white micas with proximity to gold mineralisation. Chlorite that developed during regional metamorphic or later hydrothermal alteration occurs distal to gold mineralisation. ASTER mineral mapping products, such as the MgOH Group Content used to map chlorite (±white mica) assemblages, showed evidence of correlation to mapped, local structural features and unknown structural or lithological contacts as indicated by inversion modelling of AEM data.  相似文献   

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR     

《International Journal of Applied Earth Observation and Geoinformation》2016

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.  相似文献   

一种新的窗户特征提取方法研究     

贾凯华  李和志  吴泽敏 《测绘工程》2016,25(10):64-68

在建筑物立面重建中,窗户提取、结构识别是学者们研究的热点。针对建筑物特征提取的应用需求,文中提出一种基于局部搜索算法——爬山法的窗户信息提取方法,介绍研究中采用的一些原理、方法,从而可以准确有效地从激光扫描数据中提取出建筑物的窗户信息。利用本方案对地面激光扫描系统获取的建筑物实验数据进行具体的处理,并给出可视化表达结果。  相似文献   

高压下天然菱铁矿的压缩性和电子结构研究     

高静  巫翔  秦善  张硕  杨科  李晓东 《岩石矿物学杂志》2016,35(2):276-282

采用同步辐射光源和金刚石对顶砧(DAC)技术,对天然菱铁矿的压缩性和电子结构进行了原位X射线衍射(XRD)和X射线吸收近边结构谱(XANES)测试研究。在室温下随着压力逐渐升高至50.2 GPa,菱铁矿保持方解石型结构不变,但是逐渐向Na Cl型结构转变;刚性[CO3]2-基团平行于ab-平面定向排列使c轴的压缩性大于a轴。菱铁矿在44.6~47.1 GPa之间发生电子由高自旋态(HS)向低自旋态(LS)的转变,表现为体积塌陷8%。HS菱铁矿的等温状态方程参数为K0=112(5)GPa和K'0=4.6(3)。首次采用XANES技术对菱铁矿中Fe2+的电子结构进行了研究,结果表明:随着压力升高至37.3 GPa,Fe2+的配位和局域对称并未发生明显变化;此后电子结构开始转变,Fe2+的3d轨道分裂能降低,电子跃迁概率增大,呈现LS特性。  相似文献