Multi-threaded compression of Earth observation time-series data     

《International Journal of Digital Earth》2013,6(12):1214-1230

ABSTRACT

Earth observation data are typically compressed using general-purpose single-threaded compression algorithms that operate at a fraction of the bandwidth of modern storage and processing systems. We present evidence that recently developed multi-threaded compression codecs offer substantial benefits over widely used single-threaded codecs in terms of compression efficiency when applied to a selection of moderate resolution imaging spectroradiometer (MODIS) datasets stored in the HDF5 format. Compression codecs from the LZ77 and Rice families are shown to vary in efficacy when applied to different MODIS data products, highlighting the need for compression strategies to be tailored to different classes of data. We also introduce LPC-Rice, a new multi-threaded codec, that performs particularly well when applied to time-series data.  相似文献   

Effects of lossy compression on remote sensing image classification of forest areas     

A. Zabala  X. Pons 《International Journal of Applied Earth Observation and Geoinformation》2011

Lossy compression is being increasingly used in remote sensing; however, its effects on classification have scarcely been studied. This paper studies the implications of JPEG (JPG) and JPEG 2000 (J2K) lossy compression for image classification of forests in Mediterranean areas. Results explore the impact of the compression on the images themselves as well as on the obtained classification. The results indicate that classifications made with previously compressed radiometrically corrected images and topoclimatic variables are not negatively affected by compression, even at quite high compression ratios. Indeed, JPG compression can be applied to images at a compression ratio (CR, ratio between the size of the original file and the size of the compressed file) of 10:1 or even 20:1 (for both JPG and J2K). Nevertheless, the fragmentation of the study area must be taken into account: in less fragmented zones, high CR are possible for both JPG and J2K, but in fragmented zones, JPG is not advisable, and when J2K is used, only a medium CR is recommended (3.33:1 to 5:1). Taking into account that J2K produces fewer artefacts at higher CR, the study not only contributes with optimum CR recommendations, but also found that the J2K compression standard (ISO 15444-1) is better than the JPG (ISO 10918-1) when applied to image classification. Although J2K is computationally more expensive, this is no longer a critical issue with current computer technology.  相似文献   

Steim2压缩算法的优点和缺点     

王翠芳  王松  邵玉平  杨晓源 《国际地震动态》2011,(2):14-18

基于SEED卷格式的Steim2压缩算法, 是目前国际国内的地震数据传输和本地存储中普遍采用的压缩算法, 该算法优点突出, 缺点明显. 其优点是:摸准了地震事件"长期平静"和"长期无震"的特点, 是专门符合该特点量身定做的数据压缩算法, 有显著的独到之处. 其缺点是:在地震事件"活跃期"或"突发期", 即对数据压缩需求...  相似文献   

三轴压缩条件下基于CT实时监测的冻结兰州黄土细观损伤变化研究   总被引：4，自引：3，他引：1  

郑剑锋  马巍  赵淑萍  蒲毅彬 《冰川冻土》2011,33(4):839-845

在IMPa围压下,对不同温度条件下的冻结兰州黄土三轴压缩试验过程进行CT动态扫描,获得了由CT数表示的土体损伤量表达式．结果表明：冻结兰州黄土最初在围压作用下,试样沿径向方向被压缩,导致试样轴向伸长;低温冻结试样的弹性变形持续时间长于高温试样,如-2．3℃试样在应变达到0．32％时即开始屈服进入塑性变形,而-7℃试样的...  相似文献   

Postbuckling of shear deformable stiffened anisotropic laminated cylindrical shell under axial compression     

Zhi-Min Li  De-Qing Yang 《Ocean Engineering》2011,38(10):1246-1255

A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive.  相似文献   

Depth dependency of stress ratios during the sedimentation of NW Gyeongsang Basin (Cretaceous), southeast Korea: Estimate of stress parameters and timing of tectonic episodes     

《Journal of Asian Earth Sciences》2013

The natural stress state in the lithosphere consists of the vertical load and Poisson ratio, and then additional horizontal compression and extension (denoted by Δσ_H and Δσ_T, respectively) are assumed to be superimposed upon this gravitational stress field. The resulting stress state is composed of the maximum, medium and minimum stresses denoted by σ₁, σ₂, and σ₃, respectively. The stress ratio is given as Φ = (σ₂ − σ₃)/(σ₁ − σ₃). A linear relation is found between Φ or 1/Φ and the vertical load in wrench-faulting and extensional stress regimes, respectively. The slope and intercept of the linear relation result in the additional horizontal stresses and level of (average) paleo-surface, respectively. Stress ratio is also determinable by the stress tensor inversion of fault-slip data. The earliest tectonic event (T_1 Event) in the Cretaceous Gyeongsang Basin consists of coexisting E–W compression and N–S extensional faulting episodes. Plots of Φ or 1/Φ against the burial depth (or vertical load) display several linear trends: two clusters in extensional episodes, and two or three clusters in wrench-faulting episodes. Because Δσ_H is assumed to be null or negligible in the extensional regime, Δσ_T is determinable from the slopes of two linear clusters as being −2.5 to −4.0 MPa. In wrench-faulting episodes, the values of Δσ_H are given to be 61.6–101.4 MPa by applying determined additional horizontal extensions. Determined levels of average paleo-surfaces and those of syndepostional structures illustrate that more than five wrench-faulting or extensional episodes have occurred during the T_1 Event, whose active age, consequently, ranges from the Barremian to the Coniacian. This supports that the coexisting coaxial faulting episodes with the same extension may correspond to the alternation of wrench-faulting and extensional episodes.  相似文献   

Reconnaissance par sismique réfraction de la décompression et de l’instabilite des falaises vives du Bessin (Normandie,France)     

Olivier Maquaire  Patrick Gigot 《Geodinamica Acta》2013,26(3):151-159

Résumé

Les falaises normandes du Bessin (France) sont constituées par une succession de formations calcaires et marneuses. De nombreux mouvements de terrain, parfois de grande ampleur, affectent périodiquement ces falaises. La faible résistance mécanique des marnes, mise en évidence lors de l’étude du récent glissement du Bouffay de 1981, a dû être favorisée par un fluage associé à la décompression des calcaires sus-jacents suivant un type de déformation qui peut être observé dans un mouvement quaternaire fossilisé (vallon du Pisseau). Grâce à une reconnaissance systématique de la zone décomprimée par la petite sismique réfraction, des relations simples sont établies, permettant d’évaluer le volume décomprimé â partir des caractéristiques géométriques et lithologiques de la falaise. Ce volume semble définir l’enveloppe à l’intérieur de laquelle les mouvements sont susceptibles d’intervenir.  相似文献   

雪峰造山带南段靖州盆地成因性质及形成背景   总被引：1，自引：0，他引：1       下载免费PDF全文

柏道远  钟响  贾朋远  熊雄  黄文义 《中国地质》2013,40(4):1079-1091

靖州盆地是位于雪峰构造带南段的一个NE向晚三叠世一中侏罗世小型陆相盆地,前人研究提出其为NNE向溆浦-靖州大断裂左行走滑形成的拉分伸展盆地.本文对靖州盆地构造特征、T3-J2沉积和原型盆地特征等进行了系统研究,在此基础上提出该盆地实为挤压类前陆盆地,主要依据有:①沉积物高成熟度以及残留盆地边界与盆地周缘先期地质界线总体协调一致,说明盆地沉积时为挤压挠曲作用下形成的低缓洼地;②沉积物高成熟度和远源特征,指示盆地形成于相对稳定构造环境;③盆地北端T3-J1沉积空间由岩层弯曲下凹提供;沉积物产状变化指示J2盆地受到NW向挤压并产生持续褶皱变形;沉积物特征指示沉积环境西浅东深,进一步暗示J2盆地发展受控于NW向挤压与东缘逆冲块体的重力载荷;④盆缘伸展断裂少见,因挤压形成的小型走滑断裂、逆断裂、共轭剪节理等则多见;⑤从溆浦-靖州断裂走向偏转情况来看,该断裂左行走滑时靖州盆地所处部位应为挤压区而非拉张区.据盆地沉积和构造特征及区域大地构造演化背景,盆地的形成主要与晚三叠世-早侏罗世区域SN向挤压、中侏罗世区域NWW向挤压和NNE向左行走滑有关.  相似文献   

海相软土压缩特性的试验研究   总被引：1，自引：0，他引：1  

陈波  孙德安  吕海波 《岩土力学》2013,34(2):381-388

对不同取样方式得到的上海、江苏地区海相软黏土的原状样和重塑样进行了单向压缩和等向压缩试验,分别得到各自的压缩曲线、压缩指数 和回弹指数 。通过比较原状样、重塑样的归一化压缩曲线的差异,确认了结构性对软黏土压缩特性的影响。把屈服应力后的压缩曲线外延至10 kPa时的孔隙比定义为参考孔隙比 ,用于简单量化土的组构。根据多次单向压缩试验结果得到的压缩指数 ,建立了原状样和重塑样的压缩指数 与孔隙比 或参考孔隙比 的相关方程,并通过单向、等向压缩指数的比较,认为此方程也适用于等向压缩试验结果。根据原状、重塑样压缩指数 与参考孔隙比 具有基本相同关系的结论,对原状样的结构屈服特性进行了探讨,认为原状样在压力大于结构屈服应力后,胶结已基本破坏,原状样和重塑样压缩特性差异主要是由组构的差异引起的。该研究成果,尤其是压缩指数 与参考孔隙比 的相关方程,可为工程提供重要的参考。  相似文献   

脉冲压缩方法检测岩石弹性波速度     

李长征  张碧星  师芳芳 《岩土力学》2013,34(6):1815-1821

针对岩石弹性波速度检测信噪比低、回波信号初至时间不易判读,以及较长岩石（或混凝土）超声检测难以穿透问题,提出用脉冲压缩方法检测弹性波速度。该方法与超声脉冲法检测的不同之处是在发射端采用编码信号激励,在接收端进行匹配滤波,得到高信噪比的压缩信号。介绍线性调频信号的宽时宽带特性,分析了脉冲压缩的基本原理和数字实现过程。试验研究了换能器带宽对激发信号的影响。用常规的单脉冲法和脉冲压缩方法检测了多个岩样的弹性波速度,试验结果表明,两种检测结果差异较小。给出了脉冲压缩方法用于岩石弹性波速度检测的具体步骤和计算过程。综合分析,脉冲压缩方法检测岩石弹性波速度是可行的,能够用于岩土工程的质量评价。  相似文献