玄武岩柱状节理成因性状研究及其对岩体质量的影响   总被引：1，自引：0，他引：1       下载免费PDF全文

陈旭  许模  康小兵  魏云杰 《地质找矿论丛》2008,23(3):260-263

峨眉山玄武岩中普遍发育柱状节理,表现为岩体破碎不完整,其明显受各种原生构造、表生改造、构造的影响.文章结合拟建的西南某水电工程对玄武岩柱状成因分析及性状研究,进一步研究其对岩体质量的影响.  相似文献   

成像光谱矿物填图精度兼与矿物丰度关系初探     

唐攀科  郑跃鹏  李永丽 《矿产与地质》2008,22(4):364-369

成像光谱遥感技术在岩石矿物识别和矿物填图方面发挥着越来越大作用,而成像光谱矿物填图的精度问题一直是研究的焦点。文章利用高光谱数据HyMap对新疆东天山地区的矿物填图结果,通过引入矿物填绘分布强度的概念,探索性的分析了成像光谱矿物填图与填绘矿物丰度的关系。  相似文献   

底摩擦重力试验在倾倒变形岩体稳定性研究中的应用   总被引：2，自引：0，他引：2  

陈孝兵  李渝生  赵小平 《地学前缘》2008,15(2):300-304

底摩擦重力试验(底摩擦试验)是利用相似理论分析原理,将研究原形按几何比例和各种物理力学参数,制作相似模型及确定相应的边界条件。然后按照相似边界条件进行加载试验,再现曾经发生过或今后将会出现的物理力学现象,进而了解其发展演化规律及其对工程的影响。澜沧江某水电站坝肩主要为典型的倾倒变形岩体,为探讨倾倒变形岩体在天然重力场条件的变形破裂发展趋势。试验采用模拟重力场条件的岩体底摩擦模型试验技术模拟分析岩体倾倒变形进一步发展演变过程及特征。  相似文献   

节理岩体卸荷强度特性的试验研究   总被引：2，自引：0，他引：2  

王飞  杜建坡  李秀芬 《地质灾害与环境保护》2008,19(3):104-108

卸荷状态工程岩体的强度特性与传统的加载岩体有本质的区别。目前对于岩石卸荷强度特性的研究比较多见,但对于含节理的岩体在卸荷应力状态下的强度特性,尤其是节理面对其强度的影响研究实属少见。本文通过岩体三轴模拟试验研究了卸荷应力状态下节理岩体的破坏特征,突出考虑了节理面性质对卸荷强度的影响,在此基础上提出了节理岩体卸荷强度准则的一般表达式并进行了对比验证。  相似文献   

Integration of local–global upscaling and grid adaptivity for simulation of subsurface flow in heterogeneous formations     

M. Gerritsen  J. V. Lambers 《Computational Geosciences》2008,12(2):193-208

We propose a methodology, called multilevel local–global (MLLG) upscaling, for generating accurate upscaled models of permeabilities or transmissibilities for flow simulation on adapted grids in heterogeneous subsurface formations. The method generates an initial adapted grid based on the given fine-scale reservoir heterogeneity and potential flow paths. It then applies local–global (LG) upscaling for permeability or transmissibility [7], along with adaptivity, in an iterative manner. In each iteration of MLLG, the grid can be adapted where needed to reduce flow solver and upscaling errors. The adaptivity is controlled with a flow-based indicator. The iterative process is continued until consistency between the global solve on the adapted grid and the local solves is obtained. While each application of LG upscaling is also an iterative process, this inner iteration generally takes only one or two iterations to converge. Furthermore, the number of outer iterations is bounded above, and hence, the computational costs of this approach are low. We design a new flow-based weighting of transmissibility values in LG upscaling that significantly improves the accuracy of LG and MLLG over traditional local transmissibility calculations. For highly heterogeneous (e.g., channelized) systems, the integration of grid adaptivity and LG upscaling is shown to consistently provide more accurate coarse-scale models for global flow, relative to reference fine-scale results, than do existing upscaling techniques applied to uniform grids of similar densities. Another attractive property of the integration of upscaling and adaptivity is that process dependency is strongly reduced, that is, the approach computes accurate global flow results also for flows driven by boundary conditions different from the generic boundary conditions used to compute the upscaled parameters. The method is demonstrated on Cartesian cell-based anisotropic refinement (CCAR) grids, but it can be applied to other adaptation strategies for structured grids and extended to unstructured grids.  相似文献   

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon     

Lutz Nasdala  Wolfgang Hofmeister  Nicholas Norberg  James M. Martinson  Fernando Corfu  Wolfgang Dörr  Sandra L. Kamo  Allen K. Kennedy  Andreas Kronz  Peter W. Reiners  Dirk Frei  Jan Kosler  Yusheng Wan  Jens Götze  Tobias Häger  Alfred Kröner  John W. Valley 《Geostandards and Geoanalytical Research》2008,32(3):247-265

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.  相似文献   

Composition-Induced Variations in SIMS Instrumental Mass Fractionation during Boron Isotope Ratio Measurements of Silicate Glasses     

Martin Rosner  Michael Wiedenbeck  Thomas Ludwig 《Geostandards and Geoanalytical Research》2008,32(1):27-38

An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated.  相似文献   

Recommended Values of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry     

Taeko Shinonaga  Helmuth Aigner  Dilani Klose  Peter Spinder  Heinz Fröschl  David Donohue 《Geostandards and Geoanalytical Research》2008,32(1):93-101

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.  相似文献   

河流活性物质入海通量:概念与方法   总被引：1，自引：0，他引：1  

周国华  孙彬彬  刘占元  魏华玲  曾道明 《地质通报》2008,27(2):182-187

河流水体中呈溶解态和悬浮物结合态的元素活动性强,具有生态环境意义,查明其入海通量是当前生态地球化学评价的重要任务。通过总结前人的相关研究成果,确定了影响河流水体悬浮物的浓度及其矿物、化学组成的主要因素。从沿海经济带区域生态地球化学评价的实际需要出发,拟定了开展中国主要入海河流水溶态和悬浮物结合态元素入海通量调查的基本框架。  相似文献   

膜生物反应器中膜污染机理及其防治     

宋志伟  杨帆  任南琪 《吉林大学学报(地球科学版)》2008,38(4)

通过向一体式膜生物反应器中分别投加聚合铝和粉煤灰改变料液性质,来预防膜污染和提高膜生物反应器对总磷的去除效率,并通过X射线衍射和红外光谱实验分析活性污泥性质的变化,利用扫描电镜分析中空纤维膜表观结构的变化情况,探讨防治膜污染的机理.实验结果表明:聚合铝的投加改变了活性污泥的性质和生物膜的表观结构,可有效地减缓膜污染,且除磷效率达85%以上;而投加粉煤灰并没有明显效果.  相似文献