广西河池五圩矿田箭猪坡矿区主要成矿元素富集规律     

肖振宙  汤善勇  赵正云 《矿产与地质》2021,(1):15-22

箭猪坡矿床位于羌塘-扬子克拉通滇黔桂被动陆缘南盘江—右江裂谷盆地南丹坳陷带的东南缘,属湘中—桂中北(坳陷)成矿带桂中北成矿亚带芒场-大厂成矿带。主要含矿地层为下泥盆统塘丁组灰黑色条带状及薄层状绢云母泥岩,矿区内NNW向的张扭性断裂,是矿床的主要控矿构造,矿脉的产状及形态,严格受其控制。在总结前人认识基础上,通过野外地质工作以及分析该区的岩浆岩、矿物流体、矿化体特征、矿体空间分布、元素组合分布等,结合矿山探矿巷道揭露的矿化体,发现该区成矿元素富集以300号勘探线为中心,往两侧呈正态分布,在延深方向200 m高程处元素组合开始发生变化,Sb、Sn元素含量增高,且在-200 m高程处形成锡矿脉。研究结果不仅有助于了解矿液来源、元素富集规律、矿化过程等,而且为矿山下一步深部找矿提供了依据和靶区。  相似文献   

一种基于机器学习算法的岩性填图方法     

冀全伟  王文磊  刘治博  祝茂强  袁长江 《地质力学学报》2021,27(3):339-349

通过野外地质调查与机器学习方法的有机融合,提出了一种基于梯度提升决策树算法的岩性单元填图方法。研究以多龙矿集区为模型试验区,选择1∶5万勘查地球化学数据为基础预测数据,以1∶5万区域地质图为参考,进行基于梯度提升决策树算法的岩性预测填图模型试验。首先选择研究区内小范围空白区开展野外填图,建立原始数据集并初步构建岩性单元与预测数据对应关系;其次利用机器学习方法对预测数据进行多分类任务,进而开展目标填图区预测填图工作;最后通过概率选区选定概率较低目标区,开展进一步的小范围野外地质调查填图,对原始数据和知识库进行补充,迭代循环以上流程,直至预测填图达到要求。试验显示,随着迭代次数的增加,模型精度不断提高,并在7次迭代后模型准确率达到87%。该方法强调在实际应用中野外地质调查与基于机器学习预测填图的深度融合,以及野外实地工作在整个流程中的重要性和不可或缺性;同时能够充分挖掘已有数据资料的有用信息,用于辅助修正已有岩性填图内容,或根据已勘探区资料对邻近的未勘探区进行岩性分类,有效减少野外填图工作量,是对岩性填图方法、地质单元定量预测识别的有益探索,为区域地质填图工作提供了新的参考思路和辅助手段。   相似文献   

A mathematical programming approach for scheduling equipment in a surface coal mining operation     

Gerrit V. R. Goodman  Subhash C. Sarin 《Geotechnical and Geological Engineering》1988,6(4):327-341

Summary A mathematical programming model for scheduling open pit mining was developed and validated using data from a surface mining operation. A two-phase solution procedure was used involving repeated evaluations of an integer scheduling model and a simple transportation model.  相似文献   

Soft rock pillars     

J. F. Abel Jr. 《Geotechnical and Geological Engineering》1988,6(3):215-248

Summary Soft rock pillars can be designed by several methods available in the mining literature. All of these methods include the effect of shape, or geometry, on the average strength of specimens and pillars. All of the pillar design methods include some measurement of the strength of specimens of the pillar rock. The most common rock specimen strength property measured is the unconfined compressive strength. However, the average strength of triaxially confined rock specimens is much greater than the unconfined specimen strength, which can be more important to pillar strength. The estimation of the strength of a pillar is complicated by the decrease in rock specimen strength with increase in specimen size.Editor's note: In common with North American engineering practise, the paper uses English units throughout, where feasible conversions are included in the text. Where not, the following factors may be used: 1 inch=25.4 mm; 1 ft=0.3048 m; 1 lbf/in.^–2=6.895 kn/m^–2; 1Tonf.=8.896 kN.  相似文献   

Support and strata interaction at coal faces     

Ke-Bin Zhang 《Geotechnical and Geological Engineering》1988,6(1):85-88

  相似文献   

Geotechnical assessment of the bearing capacity of coal mine floors     

A. Afrouz  F. P. Hassani  M. J. Scoble 《Geotechnical and Geological Engineering》1988,6(4):297-312

Summary This investigation concerns 3 longwall faces having variable strata and mining conditions, but supported by 202 tonnes hydraulic 6-leg chocks. Bearing capacity tests along the faces were conducted to evaluate the factors influencing floor deformation and failure. The effect of size, shape and perimeter of the base plates, thickness of the floor layer, time and moisture on the ultimate bearing capacity of the floor was measured and discussed. Application of this work is the prediction of stability and support performance of face ends, as well as the design of support systems and ground control on production faces.  相似文献   

湘西南采金“信”的地质解释   总被引：2，自引：0，他引：2  

赵代珍 《湖南地质》1989,8(1):78-84

在湘西南民间开采脉金的活动中,人们积累了很多识别金富集的标志,简称“信”。本文收集列举了25种“信”,并相应地作了地质解释,评估了含金情况。从金的地球化学特性,论述了“信”与金富集的内在联系。  相似文献   

Methane emission from coal and associated strata samples     

G. R. Barker-Read  S. A. Radchenko 《Geotechnical and Geological Engineering》1989,7(2):101-126

Summary This article discusses methods for providing a reliable forecast of the gas-dynamic behaviour of coal seams and adjacent strata. It shows that the ash content of carbonaceous materials determines their sorptive capacity (a universally applicable expression is presented for calculating the methane content of a sample) whilst the rate of methane desorption is a function of the degree of geological disturbance, i.e. the number and distribution of the macropores and fractures in the sample. This effect becomes less important as the sample ash content increases and effectively disappears above a certain value for high permeability materials.The quantity sorption-kinetic characteristic is shown to be a reliable means for quantifying methane emission behaviour. Large variations in coal sorption-kinetic characteristics are shown to occur over short distances as the geological structure of the seam changes, both vertically and horizontally. Consequently, sorption-kinetic characteristics may be used to predict the general level of methane emission from the seam and to quantify the risk of outburst inherent in disturbed areas of coal seams.  相似文献   

Influence of natural blocks on rock fragmentation by blasting     

G. R. Adhikari  R. N. Gupta 《Geotechnical and Geological Engineering》1989,7(4):333-340

  相似文献   

In situ yield behaviour of a coal pillar     

David A. Newman 《Geotechnical and Geological Engineering》1989,7(2):163-170

Summary An indication of the complete stress-strain behaviour of coal was obtained through instrumenting a headgate yield pillar and monitoring the changes in vertical and horizontal pillar stress, pillar strain, and roof-floor convergence as a function of time and distance from the moving longwall face. A semiautomated monitoring program was conducted over a 5 month period as the longwall face advanced toward and eventually passed the instrumented pillar. The development of a confined core and yield zone within the pillar was confirmed by the vertical and horizontal stress changes. Thein situ pre-failure (208 to 661 MPa) and post-failure moduli (55 to 208 MPa) of the coal were determined from the change in pillar stress versus pillar strain. Thein situ moduli are an order of magnitude lower than the 3450 MPa, commonly assumed for coal.  相似文献