水晶包裹体的类型及成因综述     

赵淑霞  张良钜  林杰 《矿产与地质》2002,16(6):349-352

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。  相似文献   

X射线衍射峰五基本要素的物理学意义与应用   总被引：6，自引：0，他引：6  

周健  王河锦 《矿物学报》2002,22(2):95-100

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。  相似文献   

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments   总被引：2，自引：0，他引：2  

F. O. Marques  P. R. Cobbold 《Tectonophysics》2002,348(4)

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.  相似文献   

Fluid-bearing alkaline carbonate melts as the medium for the formation of diamonds in the Earth''s mantle: an experimental study     

N. Pal''yanov  A. G. Sokol  M. Borzdov  A. F. Khokhryakov 《Lithos》2002,60(3-4):145-159

We have experimentally studied the formation of diamonds in alkaline carbonate–carbon and carbonate–fluid–carbon systems at 5.7–7.0 GPa and 1150–1700 °C, using a split-sphere multi-anvil apparatus (BARS). The starting carbonate and fluid-generating materials were placed into Pt and Au ampoules. The main specific feature of the studied systems is a long period of induction, which precedes the nucleation and growth of diamonds. The period of induction considerably increases with decreasing P and T, but decreases when adding a C–O–H fluid to the system. In the range of P and T corresponding to the formation of diamonds in nature, this period lasts for tens of hours. The reactivity of the studied systems with respect to the diamond nucleation and growth decreases in this sequence: Na₂CO₃–H₂C₂O₄·2H₂O–C>K₂CO₃–H₂C₂O₄·2H₂O–C>>Na₂CO₃–C>K₂CO₃–C. The diamond morphology is independent of P and T, and is mainly governed by the composition of the crystallization medium. The stable growth form is a cubo-octahedron in the Na₂CO₃ melt, and an octahedron in the K₂CO₃ melt. Regardless of the composition of the carbonate melt, only octahedral diamond crystals formed in the presence of the C–O–H fluid. The growth rates of diamond varied in the range from 1.7 μm/h at 1420 °C to 0.1–0.01 μm/h at 1150 °C, and were used to estimate, for the first time, the possible duration of the crystallization of natural diamonds. From the analysis of the experimental results and the petrological evidence for the formation of diamonds in nature, we suggest that fluid-bearing alkaline carbonate melts are, most likely, the medium for the nucleation and growth of diamonds in the Earth's upper mantle.  相似文献   

山地丘陵地区物探爆破孔钻机及配套机具的研究与开发          下载免费PDF全文

赵大军  孙友宏  侯传彬  薛军 《探矿工程》2002,(4):22-24

为满足我国山地丘陵地区物探爆破孔施工技术的要求，研究适合土层、岩层钻进用的钻机及工具，对钻机的配套设备进行了开发研究。分析了国内山地丘陵地区物探爆破孔施工技术现状，并着重介绍了研制设计内容及生产试验情况。  相似文献   

青藏高原大气—植被相互作用的模拟试验——Ⅰ.物理通量和参数   总被引：5，自引：0，他引：5       下载免费PDF全文

吕建华  季劲钧 《大气科学》2002,26(1):111-126

在原大气-植被相互作用模式AVIM的基础上作了改进，包括对值被生理过程，如（1）光合作用：（2）呼吸；（3）分配和（4）物候等新的描述方法。对青藏高原上30个站点进行模拟计算，给出了高压上地表辐射及水热物理通量以及地表拖曳系数和地面反照率的分布特征。模拟结果表明净辐射和感热通量由东南和西北增加，高原西北部地表反照率较高，东南部地表反照率较低。  相似文献   

长江巨洪前期物理因子的配置   总被引：4，自引：4，他引：4  

冯利华 《地理科学》2002,22(4):504-507

提出了长江巨洪前期物理因子配置的概念，在每一次巨洪发生之前，影响巨洪的主要物理因子之间一般都会表现出相似的特征，即出现一些固有的配置，这些配置正是长江发生巨洪的强信号，对长江巨洪的预测研究具有重要的指示作用。  相似文献   

零价铁去除Cr（Ⅵ）的批实验研究   总被引：9，自引：0，他引：9       下载免费PDF全文

黄园英刘菲  鲁雅梅 《岩石矿物学杂志》2003,22(4):349-351

零价铁去除Cr(Ⅵ)的一系列批实验结果表明：水溶液中发生的氧化还原反应符合准一级反应；对于相同粒度的铁屑(比表面积2．89m^2／g)，固液比由05g／100mL增加到2．0g／100mL，Cr(Ⅵ)质量浓度达到排放标准所需反应时间从26．7min降为3．6min；在固液比相同、原水中Cr(Ⅵ)质量浓度不超过30mg／L时，原水质量浓度增大，达到饮用水标准的反应时间增加；其他条件相同，升高温度可提高零价铁与Cr(Ⅵ)的反应速率。  相似文献   

老湾金矿床地球物理特征及找矿标志   总被引：4，自引：2，他引：4  

马长源  简新玲 《物探与化探》2003,27(2):83-87,100

老湾金矿是我国近年来探明的重要的大型构造蚀变岩型金矿床.金矿体(或矿脉群)、控矿构造、岩浆岩、赋矿地层、近矿热液蚀变带以及周围地质体之间存在某种物性差异,因而有明显的地球物理异常特征,构成了金矿床重要的地球物理找矿标志.作者试图在矿床地球物理特征研究的基础上,总结地球物理找矿标志,确定找矿勘查物探方法组合流程,以期配合、指导正在进行中的桐柏-大别山北坡金银成矿带的普查找矿工作.  相似文献   

地球深部物质的某些物性测量方法研究   总被引：8，自引：1，他引：8  

谢鸿森  周文戈  刘永刚  郭捷  侯渭 《地学前缘》2003,10(2):357-365

文中介绍了地球深部物质实验室近 2 0年来开展高温高压下地球深部物质物性实验研究过程中 ,在测量方法方面的进步和应用情况。这些测量方法包括了高温、高压下弹性的超声测量方法、高温高压下电性的测量方法、高压差热分析法和高压下热学Gr櫣ｎｅｉｓｅｎ参数的测量方法诟呶赂哐瓜卵沂涂笪锏牡猿饬恐?,我们由超声脉冲透射方法改进为超声脉冲透射反射法 ,克服了样品室中压力和温度梯度对样品的影响。在高温高压下岩石和矿物的电学性质测量中 ,我们由直流法发展为阻抗谱法 ,不仅克服了样品极化对测量结果的影响 ,还可以获得离子在溶液中的多种物理化学参数 ,以及监测含水矿物在高温高压下的脱水动力学特征。在固体传压介质中建立的高压热学Gr櫣ｎｅｉｓｅｎ参数的测量方法 ,由于升压速率比较小且叶蜡石在高压下的热导系数增大 ,其测量结果需要进行校正 ,其测量方法有待进一步改进。  相似文献