北斗三号卫星精密定轨中的光压模型研究          下载免费PDF全文

李鹏杰  张捍卫  谢孟辛  赵东方 《天文学报》2023,(4):47

对于在轨运行的BDS (BeiDou Navigation Satellite System)卫星, 太阳光压是作用在卫星上主要的非引力摄动. 受多种因素的影响, 太阳光压摄动力难以精确建模, 是BDS卫星精密定轨和轨道预报过程中重要的误差来源. 由于ECOMC (Empirical CODE Orbit Model 1 and 2 Combined)模型兼顾了ECOM1 (Empirical CODE Orbit Model 1)和ECOM2 (Empirical CODE Orbit Model 2)模型的特点, 在模型中引入了较多的待估参数, 使得参数之间存在强相关性. 针对ECOMC模型的这一缺陷, 文中收集了2019年1月至2022年4月武汉大学分析中心提供的BDS-3卫星精密星历, 采用动力学轨道拟合方法得到了ECOMC模型的13个光压参数. 通过对该模型的光压参数进行时间序列分析, 分别给出了BDS-3 IGSO (Inclined Geosynchronous Orbit)和MEO (Medium Earth Orbit)卫星光压模型的参数选择策略. 并利用轨道拟合和轨道预报试验, 验证了光压模型参数选择策略的合理性. 结果表明, 采用改进型ECOMC模型进行BDS-3 IGSO和MEO卫星轨道拟合的效果最佳, 同时, 也能够提升BDS-3 IGSO和MEO卫星中长期轨道预报的精度.  相似文献   

建筑在强震下横拉承压力钢筋负荷测量          下载免费PDF全文

任燕娟 《地震工程学报》2018,40(4):692-697

在强震状态下,建筑物的横拉承压受力较为复杂,另外由于建筑物形状及在地震中受力面积大小不同,在强震下造成碰撞大小影响不一导致其横拉承压力的随机复杂性十分突出。传统的建筑承压负荷检测方法中钢筋负荷受力测量能力不足,检测结果易出现误差。将建筑钢筋的机械性能设为理想弹塑性,利用建筑物横拉承压力钢筋负荷测量方法,对不同结构、不同工况的建筑钢筋载荷的变化规律进行测试分析,结合建筑局部承压特点和整体结构聚力方式,设计横拉承压力钢筋负荷检测方法,并进行仿真实验,结果表明该方法模型所得数据更加精准,有良好的适用性。  相似文献   

风浪背景下舰船水压场信号的自适应AR模型预测滤波   总被引：14，自引：0，他引：14  

林春生  邓大新  任德奎 《海洋学报》2004,26(4):133-138

为了有效地从风浪背景中检测舰船水压信号,首先根据舰船水压信号和波浪噪声的特点以时间序列的AR模型理论为依据,导出一种便于实现的自适应滤波器结构,并用NFTF自适应算法实现对舰船水压信号的预测滤波,取得了明显的效果.计算机仿真实验结果表明,给出的方法对抗波浪干扰具有良好的性能.  相似文献   

地震断层对管道压溃压力的影响          下载免费PDF全文

余建星  袁祺伟  余杨  王华昆  王彩妹  赵岩 《世界地震工程》2020,(2):180-190

利用有限元软件ABAQUS,结合用户自定义Python程序,开展地震断层作用下深海管道局部变形和压溃过程的数值模拟。分析均质土体和随机分布土体模型的地震断层位移大小对管道局部变形的影响,并分析断层诱发的局部挤压变形对管道压溃压力的影响。研究表明:相比于断层走向与管道轴线方向垂直的走滑断层,断层走向与管道轴线方向夹角为45°的走滑断层作用下管道的压溃压力较小,且当断层走向为管道轴线方向逆时针旋转45°时,左旋走滑断层作用下管道的压溃压力低于右旋走滑断层作用下的管道压溃压力。断层位移相同时,管道径厚比越大,压溃压力越小。考虑土壤随机性时,由于APIX65钢制管道刚性较大,且管道两侧土体内聚力和摩擦角分散于均质土壤土体参数均值两侧,因此断层作用过程中管道受到的土压力在均质土壤模型中的土压力数值处上下波动。  相似文献   

包裹碎石桩加固的砂土液化机理试验研究          下载免费PDF全文

王晋宝  宋鑫彤  田美灵  王亚军 《地震工程学报》2019,41(1):76-85

通过分别开展包裹碎石桩加固、碎石桩加固以及未加固的饱和砂土液化振动台试验,对比分析不同加固类型下的抗液化性能,重点剖析包裹碎石桩加固的砂土液化机理。试验表明:振动加载过程中,包裹碎石桩始终保持桩体的完整性与良好的排水性能且其加固模型地基的总沉降量相较于未加固模型地基减少了50%,相较于碎石桩加固模型地基减少了31.8%。包裹碎石桩加固模型排出水量较未加固模型地基提高了33.3%,较碎石桩加固模型地基提高了16.6%;包裹碎石桩加固模型地基的超静孔压值下降显著且地基下层砂土出现未液化的现象;并进一步发现包裹碎石桩的排水加固作用沿土层竖向深度呈递增趋势。因此,可以发现包裹碎石桩加固砂土液化的抗震性能优于碎石桩。  相似文献   

景观建筑挡土墙优化设计后抗震性能的实验测试研究          下载免费PDF全文

牛艳玲  王洁宁 《地震工程学报》2019,41(3):596-600

目前的景观建筑设计中往往更注重建筑的景观性,而忽略了建筑的安全稳定性,导致景观建筑的整体抗震效果较差,在景观建筑设计中加入挡土墙设计可以有效提高其抗震性。为此,设计一种具有一定抗震性能的景观建筑挡土墙,利用建筑施工过程中保留的复合纤维材料、建筑垃圾以及纤维绳等作为土墙填充物,并加入具有一定抗拉能力的拉筋材料,以保持土墙内部的稳定性。考虑景观建筑通常注重外观视觉效果,使用"平改坡"设计,在墙体表面种植具有一定视觉冲击的植物,增加土墙自重,促进土墙整体结构的稳定性。分析挡土墙后面无限倾斜填土受力状态,选取菱形微小单元体作为研究对象,计算景观建筑的挡土墙土压力强度。实验证明,优化设计的景观建筑挡土墙结构可以有效增强景观建筑的整体抗震能力。  相似文献   

AN EXPERIMENTAL STUDY ON THE PROCESS OF INTERGRANULAR PRESSURE SOLUTION OF PLAGIOCLASE GOUGE UNDER HIGH TEMPERATURE AND PRESSURE: METHOD AND PRELIMINARY RESULTS          下载免费PDF全文

ZHANG Shu  HE Chang-rong 《地震地质》2019,41(4):1012-1026

To understand the mechanism of lower-crust earthquake and slow slips, it is necessary to study the frictional properties of mafic rocks and their major rock-forming minerals. Previous studies have performed a series of experimental researches on gabbro, basalt and their major constituents. According to the results of previous experiments, frictional sliding of plagioclase under hydrothermal conditions(100~600℃)shows a property of velocity weakening, and the experimental results show that both the direct rate effect parameter(a)and the healing effect parameter(b)increase with temperature, a typical feature for thermally-activated processes. Velocity weakening means property of a shear band that has a stronger friction healing effect than the direct rate effect in the rate and state friction constitutive framework, and the healing effect(b value)in constitutive relation mainly reflects the increase in contact area with time under hydrothermal conditions, with some minor effect of structural changes. Since the microphysical mechanism of feldspar minerals at the contacts is mainly brittle cataclasis for temperatures below 600℃, the significant frictional healing effect in this case can only be explained by the mechanism of pressure solution. In order to determine if the dissolution process of plagioclase actually occurs on the laboratory time scale, we conducted hydrostatic experiments on plagioclase powder samples under hydrothermal conditions whereby frequent contact switch between particles seen in frictional sliding experiments can be avoided, making the observation on the dissolution sites possible. Experimental temperatures were 400℃ and 500℃, with confining pressure of 90~150MPa, pore pressure of 30MPa, with 2mm initial thickness of fault gouge. The mechanical data show that a creep process occurred in the plagioclase fault gouge in the experimental temperature and pressure range; and the microstructures of the experiment show that precipitation of new grains is prevalent as the product of pressure solution process between plagioclase particles. At the same time, it is observed that the contact points have an appearance similar to fused, fuzzy structure as signatures of dissolution. The results of our experiments provide a definite experimental evidence for the healing mechanism in friction of plagioclase and for the theoretical relation between unstable slip and the pressure solution process. The results of the experiments are summarized as follows: (1)Drainage rate of pore water in plagioclase gouge was high in the first few hours of experiment, but gradually decreases over time for both temperature and pressure series of experiments slowing down to a steady state. This feature indicates that there is a creep process that evolves inside the plagioclase gouge. In the temperature-series experiments, the drainage rate of the pore water in the plagioclase gouge at 400℃ is relatively low than the cases for higher temperatures. Thus, the applied temperature is positively correlated with the creep of plagioclase gouge. (2)Scanning electron microscopy(SEM)observations of the experimentally deformed samples were performed on thin sections cut along the sample axis. Firstly, from the images of microstructure, it was found that the degree of particle fracture became more significant at a higher effective pressure, with smaller pore volume between particles. In the temperature-series experiments it was found that the degree of compaction of plagioclase gouge increased with increasing temperature. Precipitation of plagioclase grains in layered structures was generally observed in high-magnification images, indicating the presence of pressure solution processes. Contact points were also found to be in a state of ambiguity that seems to be a fused morphology, but the details of the structure remain to be determined by further observations. The above results indicate that the pressure solution process of plagioclase particles can occur on a typical laboratory time scale, and the results of this study provide robust experimental evidences for the theory that links between pressure solution and the mechanism of frictional healing and unstable slips for plagioclase.  相似文献   

固体颗粒表面吸附水层厚度实验研究   总被引：6，自引：0，他引：6  

刘德新  岳湘安  侯吉瑞  曹建宝  汪龙梅 《矿物学报》2005,25(1):15-19

以玻璃微珠为对象,探索堆积固体颗粒表面吸附水层厚度随驱动压力梯度的变化规律。结果表明：完全浸润的堆积固体颗粒之间存在3种不同性质的水,因其受表面作用力的大小不同,可用离心法加以区分。随着离心力的增加,依次驱替出自由水、毛管水和吸附水层水。结合重量分析,用离心法可得到不同驱动压力梯度下的吸附水量及吸附水层厚度。吸附水层厚度是水动力学条件的函数,其随驱动压力梯度的变化规律为解释多孔介质中水相的渗流特性提供依据。  相似文献   

常温和压力0.1～1300 MPa下硬石膏的拉曼光谱研究   总被引：1，自引：0，他引：1  

杨玉萍  郑海飞 《矿物学报》2005,25(3):299-302

利用立方氧化锆压腔装置测量了高压下硬石膏中硫酸根离子内部S-O键的四个振动（对称伸缩振动、弯曲振动、反对称伸缩振动和变形弯曲振动）的拉曼位移,研究结果表明：在25℃和0．1～1300MPa压力范围内硬石膏未发生相变,所观察到的硬石膏各个拉曼峰的位移值随压力的增加而线性增加,它们与压力之间的关系可分别表达为：υ1018=0．0053p＋1016.8,υ417=0．0013p＋416．82,υ498=0．0044P＋499．25,υ1129=0．0052p＋1128．5,υ1160=0．0067p＋1159．5,υ608=0．0028p＋608．76,υ627=0．0036p＋627．01,υ675=0．0039p＋675．32,且伸缩振动受压力的影响比弯曲振动大。其1018cm^-1峰强度大,是石英464cm^-1峰的6倍,因此硬石膏也是宝石压腔良好的压力标定物质。  相似文献   

高温高压下辉石岩的电导率实验研究   总被引：3，自引：0，他引：3  

代立东  李和平  刘丛强  单双明  崔桐娣  邓鹤鸣  许祖鸣 《矿物学报》2005,25(3):303-306

使用YJ-3000t紧装式六面顶高压设备和1260阻抗／增益-相位分析仪,在1．0～4．0GPa和773～1134K下用阻抗谱法就位测定了辉石岩的电导率。实验结果表明,电导率对频率具有很强的依赖性;温度是决定辉石岩电导率的一个重要物理参数,电导率随着温度升高而增大,lgσ与I／T之间符合Arrenhius关系式;随着压力升高。电导率降低,活化焓和独立于温度的指前因子亦降低。  相似文献