A hybrid method for size characterization of coarse subsurface fluvial sediments     

Stephen P. Rice  Judith K. Haschenburger 《地球表面变化过程与地形》2004,29(3):373-389

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

近红外反射光谱学在岩石矿物研究中的应用Ⅱ.快速测定地质样品中有机质     

龙梅  裴世桥 《岩矿测试》2004,23(1):6-10

利用偏最小二乘法回归的多变量校正方式,建立了应用近红外反射光谱学方法无损快速测定各种地质样品中有机质的模型.设计了多重散射光校正、标准正常变量转换及导数光谱,扣除额外基线和重叠信号的影响,分离出与有机质含量有关的光谱信息.大多数地质样品的有机质近红外反射光谱估算结果与化学法符合.  相似文献   

发射光谱载体蒸馏法测定地质样品中微量硼铍锡银   总被引：2，自引：2，他引：2  

李滦宁  赵淑杰  王烨 《岩矿测试》2004,23(1):30-32

选择了适合的缓冲剂,利用载体蒸馏法将被测元素与基体元素分离,使Be转变为易挥发的氟化物与B、Sn、Ag同时蒸发;降低了谱线背景及元素检出限;加入内标元素Au、Bi,提高了方法的准确度和精密度;采用普通 3mm×3mm×0.7mm杯型电极,装样量少,操作简单。方法检出限(wB/10-6)分别可达B1.5、Be0.3、Sn0.8、Ag0.02;准确度(Δlog C)基本在-0.05～0.05,精密度(RSD,n=8)为2.9%～17%。  相似文献   

用于新生代定年的Ar-Ar法标准样品候选样品初测结果   总被引：5，自引：1，他引：5  

桑海清  丁林  戴檀谟 《矿物岩石地球化学通报》2004,23(1):24-27

Ar Ar法定年的特点是必须要有一套年龄从小到大的标准样。迄今用于新生代定年的国内标准样极少。为满足新生代矿物Ar Ar法定年的需要,初选了一个标准样候选者BT 1透长石。样品总重366g,粒级6080目,纯度100%,缩分为100瓶,每瓶3 66g。Ar Ar阶段加热法初测结果为:全部12个阶段给出的总气体年龄为30 8±0 9Ma,412阶段视年龄十分接近,年龄谱平坦,对应的39Ar析出量达96%,坪年龄为29 6±0 4Ma,等时年龄为29 6±0 6Ma,MSWD=1 01。40Ar/36Ar初始值为293 6±3 9,与尼尔值295 5相当。重复测定结果为:全部气体年龄为31 0±0 9Ma(全部9个阶段),坪年龄为29 5±0 4Ma,等时年龄为29 4±0 6Ma,MSWD=1 94,40Ar/36Ar初始值为282 2±6 3。这些结果表明,BT 1透长石不含过剩氩,作为新生代定年的Ar Ar法标准样品候选者是较为理想的。  相似文献   

Grain coarsening in contact metamorphic carbonates: effects of second-phase particles, fluid flow and thermal perturbations   总被引：3，自引：0，他引：3  

A. Berger  M. Herwegh 《Journal of Metamorphic Geology》2004,22(5):459-474

Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature‐induced grain coarsening. Despite this large‐scale trend, a considerable grain size scatter occurs on the outcrop‐scale indicating local influence of second‐order effects such as thermal perturbations, fluid flow and second‐phase particles. Second‐phase particles, whose sizes range from nano‐ to the micron‐scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron‐scale second‐phase particles, or to samples containing a large number of nano‐scale particles. The obtained data set suggests that the second phases induce a temperature‐controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C₂ e^Q*/RT(d_p/f_p)^m*, where C₂ is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio d_p/f_p, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C₂ and Q*. Besides variations in the average grain size, the presence of second‐phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian‐type distributions of the pure samples. In contrast, fluid‐enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ¹⁸O and δ¹³C isotope ratios in fluid‐affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid‐induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second‐order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.  相似文献   

合理设计岩屑规程保证正常钻进条件——金刚石钻进技术专题之一          下载免费PDF全文

汤凤林  段隆臣  В.Ф.Чихоткин  刘晓阳 《探矿工程》2004,31(6):45-48

论述了正常钻进的条件，提出了合理岩屑规程是保证正常钻进的关键和设计钻头的主要依据之一，讨论了岩屑规程与金刚石钻头唇面工作状态、孔底表面粗糙度和岩屑粒度的关系，提出了相应的建议。  相似文献   

Some effects of the memory kernel singularity on wave propagation and inversion in viscoelastic media – II. Inversion     

A. Ribodetti  A. Hanyga 《Geophysical Journal International》2004,158(2):426-442

  相似文献   

Texture and petrology of modern river, beach and shelf sands in a volcanic back-arc setting, northeastern Japan     

Atsushi  Noda 《Island Arc》2005,14(4):687-707

Abstract The focus in the present study is on characterizing spatial patterns of textural and petrological variabilities, and on evaluating mechanisms influencing the textural and petrological components of modern river, beach and shelf sands in a volcanically active back‐arc tectonic setting. Abashiri Bay and the surrounding area in eastern Hokkaido, Japan, has volcanic source land within a back‐arc region associated with subduction of the Pacific Plate beneath the Okhotsk (North American) Plate. A total of 41 river, beach and shelf sands were obtained for grain‐size and modal composition analyses. Multivariate analytical techniques of hierarchical cluster and principal component analyses were performed on the textural and petrological data for investigating relations among quantitative variables. On the basis of grain‐size data, four sedimentary zones were identified: zone I, palimpsest zone; zone II, relict zone; zone III, modern (proteric) zone; zone IV, coastal sedimentary zone. All sands are feldspatholithic and quartz‐deficient. The framework (quartz, feldspar and rock fragment) modal compositions were also classified into four clusters, A–D. The characteristic components of each cluster are as follows: cluster A, felsic volcanic rock fragments; cluster B, andesitic–basaltic volcanic rock fragments; cluster C, mixed or plagioclase; cluster D, sedimentary rock fragments. Almost all sands in western and central Abashiri Bay belong to cluster A, where the original compositions are influenced by Kutcharo pyroclastic flow deposits. Andesitic–basaltic lava and Neogene volcaniclastic and sedimentary rocks have a major influence on the compositions of shelf sands in eastern Abashiri Bay. The modal compositions are basically controlled by the source lithology. Compositional maturity (percentage of quartz to feldspar and rock fragments; Q/FR%) slightly increased, in order, from river (1.2), zone IV (coastal, 1.7), zone II (relict, 2.2), zone I (palimpsest, 3.6), to zone III (modern proteric, 7.0). Greater maturity in the recycled sediments is indicative of weathering under the sea or abrasion by transportation induced by sea‐level fluctuations, waves, or sea currents. Several controlling factors – (i) source lithological; (ii) mineralogical; (iii) climatic; and (iv) geomorphological controls – might still cause low maturity through all sedimentary zones other than the continental margin sands previously reported.  相似文献   

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions     

John Leys  Grant McTainsh  Terry Koen  Brian Mooney  Craig Strong 《地球表面变化过程与地形》2005,30(5):579-590

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Kinetic energy–rainfall intensity relationship for Central Cebu, Philippines for soil erosion studies     

Ricardo L. Fornis  Hans R. Vermeulen  Jan D. Nieuwenhuis 《Journal of Hydrology》2005,300(1-4):20-32

In the study of soil erosion, specifically on detachment of soil particles by raindrop impact, kinetic energy is a commonly suggested indicator of the raindrop's ability to detach soil particles from the soil mass. Since direct measurement of kinetic energy requires sophisticated and costly instruments, the alternative approach is to estimate it from rainfall intensity. The present study aims at establishing a relationship between rainfall intensity and kinetic energy for rainfalls in Central Cebu, Philippines as a preface of a wider regional investigation.

Drop size distributions of rainfalls were measured using the disdrometer RD-80. There are two forms of kinetic energy considered here. One is kinetic energy per unit area per unit time (KE_R, J m⁻² h⁻¹) and the other is kinetic energy per unit area per unit depth (KE, J m⁻² mm⁻¹). Relationships between kinetic energy per unit area per unit time (KE_R) and rainfall intensity (I) were obtained using linear and power relations. The exponential model and the logarithmic model were fitted to the KE–I data to obtain corresponding relationships between kinetic energy per unit area per unit depth of rainfall (KE) and rainfall intensity (I). The equation obtained from the exponential model produced smaller standard error of estimates than the logarithmic model.  相似文献