某地平板玻璃原料用石英砂的提纯研究     

彭光菊  黄永平  张石林  莫伟泉  黄松 《矿产与地质》2003,17(1):24-26

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。  相似文献   

四川盆地白垩纪沙漠石英沙颗粒表面特征   总被引：1，自引：0，他引：1       下载免费PDF全文

江新胜  徐金沙  潘忠习 《沉积与特提斯地质》2003,23(1):60-68

石英具有较大的硬度和较高的化学稳定性，因而其颗粒表面特征能很好地反映沉积环境。而通过扫描电镜研究石英颗粒表面微细特征是分析沉积环境行之有效的方法。虽然多数人认为四川盆地白垩纪地层存在沙漠沉积(打儿凼组和夹关组)，但仍有人对沙漠沉积的存在持怀疑态度，并认为是河流成三角洲沉积。过去关于其沉积环境的判别主要是根据沉积结构和构造，并未对其石英沙颗粒表面特征进行过系统分析。笔者对采自四川盆地白垩系不同层位地层的样品进行了石英沙颗粒表面特征系统分析。结果表明，石英沙颗粒表面特征分析可以成功地将石英沙区分为风成和水成沉积。因此，本文从石英沙颗粒表面特征方面进一步肯定了四川盆地白垩纪古沙漠的存在。  相似文献   

论桩基施工中流砂现象处理     

陈亮晶李有文  何建军 《湖南地质》2003,22(1):54-57

地下水流动对土体产生渗透力；当渗透力大于土体的抗剪强度，土体破坏，也就是当施工造成地下水水力坡度超过砂层的临界水力坡度即产生流砂现象．运用水文地质工程地质学方面的原理其处理方法有两类：—是莫尔一库仑法：即c法和φ法；二是临界水力坡度法(Ic法)．  相似文献   

煤层底板突水系数计算公式的探讨   总被引：12，自引：1，他引：12  

段水云 《水文地质工程地质》2003,30(1):96-99

根据从诸多濒临带压开采威胁的煤矿中得到大量的第一手资料,运用多元统计分析方法,揭示出了煤层底板突水这种地质现象的演化和特征的内在联系和规律,建立了矿压对煤层底板破坏深度的计算式。通过对以往煤层底板突水系数计算公式进行对比、分析、推理和总结,克服了以往计算公式的不足,继承和发展了公式的优点,得出了考虑因素较全面和较科学的突水系数计算式,从而为解决煤层底板隔水岩柱薄弱地带或断裂陷落柱薄弱地带的煤矿安全生产提供了一套行之有效的解决方法。这套公式在太原西峪煤矿和晋城矿务局(西区)得到了应用,证明是一种行之有效的方法。  相似文献   

陕甘宁盆地陇东地区长8油组厚层非均质砂体的沉积学解剖   总被引：15，自引：3，他引：15  

郑希民  宋广寿  王多云  李凤杰  王志坤  李树同  王峰  刘自亮 《沉积学报》2003,21(2):272-277

通过对延长统长8段厚层砂岩沉积岩石学和层序地层学研究,将其分为两类,一类是由多期单一成因的分流河道砂岩叠加构成;另一类是由三角洲前缘的水下分流河道、河口坝、坝顶席状砂和滑塌砂等多种沉积微相以不同的组合形式叠加构成。首次提出在“高可容纳空间,高沉积通量”背景下,只有经过特殊水动力条件(淘洗)改造后形成的被我们称之为坝顶席状砂的砂岩才有可能成为相对高孔、高渗的优质储层。  相似文献   

Velocity structure of uppermost mantle beneath North China from Pn tomography and its implications   总被引：1，自引：0，他引：1  

汪素云  许忠淮  裴顺平 《中国科学D辑(英文版)》2003,46(Z2)

20301 Pn arrival time data are collected from the seismological bulletins of both national and regional seismic networks. Pn travel time residuals are tomographically inverted for the Pn velocity structure of uppermost mantle beneath North China. The result indicates that the average Pn velocity in North China is 7.92 km/s, and the velocity varies laterally from ?0.21 to +0.29 km/s around the average. The approximately NNE trending high and low velocity regions arrange alternatively west-eastward. From west to east we can see high velocity in the middle Ordos region, the Shanxi graben low, the Jizhong depression high, the west Shandong uplift and Bohai Sea low, and the high velocity region to the east of the Tanlu fault. In the southern boundary zone of the North China block, except for the high velocity in the Qingling Mountains region, the velocity is generally lower than the average. Obvious velocity anisotropy is seen in the Datong Cenozoic volcanic region, with the fast velocity direction in NNE-SSW. Notable velocity anisotropy is also seen around the Bay of Bohai Sea, and the fast velocity directions seem to show a rotation pattern, possibly indicating a flow-like deformation in the uppermost mantle there. The Pn velocity variations show a reversed correlation with the Earth's heat flow. The low Pn velocity regions generally show high heat flow, e.g., the Shanxi graben and Bohai Sea region. While the high Pn velocity regions usually manifest low heat flow, e.g., the region of Jizhong depression. This indicates that the Pn velocity variation in the study region is mainly aroused by the regional temperature difference in the uppermost mantle. Strong earthquakes in the crust tend to occur in the region with the abnormal low Pn velocity, or in the transition zone between high and low Pn velocity regions. The earthquakes in the low velocity region are shallower, while that in the transition zone are deeper.  相似文献   

机载激光测深中的波浪改正技术   总被引：3，自引：0，他引：3  

黄谟涛  翟国君  欧阳永忠  陆秀平 《武汉大学学报(信息科学版)》2003,28(4):389-392

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。  相似文献   

Determination of silica sand stiffness     

G. R. Lashkaripour  R. Ajalloeian 《Engineering Geology》2003,68(3-4):225-236

Site investigation and evaluation of properties of soil or rock are important aspects of geotechnical design. Determination of the ground stiffness is one of the important parameters in geotechnical engineering. Since the measurement of shear modulus is very sensitive to soil disturbance, especially for sand, determination of the stiffness of soil in the field is more reliable than in laboratory tests on sampled specimens. Measurement of shear modulus is one of the most common applications of self-boring pressuremeter testing. As an in situ device, the pressuremeter provides a unique method for assessing directly the in situ shear modulus of a soil. This paper describes a laboratory study of silica sand stiffness, which varies with stress level and strain amplitude. The results show that the elastic shear modulus value is mainly dependent on the value of the mean effective stress and relative density.  相似文献   

An experimental investigation of LNAPL migration in an unsaturated/saturated sand   总被引：4，自引：0，他引：4  

Radhey S. Sharma  Mostafa H. A. Mohamed 《Engineering Geology》2003,70(3-4):305-313

Accidental spills of hydrocarbons, such as Light Non-Aqueous Phase Liquids (LNAPLs), are one of the most common sources of subsurface contamination. Migration of LNAPL in a porous medium is influenced by various factors such as the number of fluids present in the unsaturated/saturated zones and the proportion of pores occupied by each fluid. The results for relationship between matric suction and degree of saturation are presented in this paper for water–air, water–LNAPL and LNAPL–air systems in a sand. A simple and reliable setup using Buchner funnel was designed to obtain these relations. It was found that the relationship between matric suction head and degree of saturation is hysteretic for all the fluid systems (water–air, water–LNAPL and LNAPL–air). Furthermore, the amount of hysteresis depended upon the fluid system, with the maximum hysteresis occurring for water–air system. The results suggest that the amount of trapped air depends upon the reversal degree of saturation from drying to wetting.  相似文献   

Wave-influenced deltas: geomorphological implications for facies reconstruction   总被引：5，自引：0，他引：5  

Janok P. Bhattacharya  Liviu Giosan† 《Sedimentology》2003,50(1):187-210

ABSTRACT A process‐based facies model for asymmetric wave‐influenced deltas predicts significant river‐borne muds with potentially lower quality reservoir facies in prodelta and downdrift areas, and better quality sand in updrift areas. Many ancient barrier‐lagoon systems and ‘offshore bars’ may be better reinterpreted as components of large‐scale asymmetric wave‐influenced deltaic systems. The proposed model is based on a re‐evaluation of several modern examples. An asymmetry index A is defined as the ratio between the net longshore transport rate at the mouth (in m³ year^?1) and river discharge (in 10⁶ m³ month^?1). Symmetry is favoured in deltas with an index below ≈ 200 (e.g. Tiber, lobes of the Godavari delta, Rosetta lobe of the Nile, Ebro), whereas deltas with a higher index are asymmetric (e.g. Danube – Sf. Gheorghe lobe, Brazos, Damietta lobe of the Nile). Periodic deflection of the river mouth for significant distances in the downdrift direction occurs in extreme cases of littoral drift dominance (e.g. Mahanadi), resulting in a series of randomly distributed, quasi‐parallel series of sand spits and channel fills. Asymmetric deltas show variable proportions of river‐, wave‐ and tide‐dominated facies both among and within their lobes. Bayhead deltas, lagoons and barrier islands form naturally in prograding asymmetric deltas and are not necessarily associated with transgressive systems. This complexity underlines the necessity of interpreting ancient depositional systems in a larger palaeogeographic context.  相似文献