侧向侵蚀相关的走滑断裂滑动速率计算新方法   总被引：1，自引：0，他引：1  

任治坤  张竹琪  陈涛  王伟涛 《地震地质》2014,36(4)

断层滑动速率是活动构造研究中的重要内容,是反映断裂活动性和地震危险性的重要参数之一。随着测年技术不断发展和测年精度大幅度提高,全新世甚至千年尺度和百年尺度的年轻地质体的位错也越来越多地被用于断层滑动速率计算。用走滑断裂带上地质体实测年龄计算滑动速率,会受到2种因素影响:1)累积位移时间是否与所测地质体年代相符合;2)地质体位移形成过程中会受到侵蚀。在利用全新世地质体计算断层滑动速率时,应将侧向侵蚀的影响剔除。因此,文中提出1种计算走滑断层滑动速率的新方法——差值法。走滑断层上河流阶地演化与断层位错分析表明,在阶地拔河高度存在较大差异的情况下,可以利用阶地拔河高度与年龄按比例进行计算。此方法在一定程度上提高了所计算滑动速率的精度,但是需要至少有3级不同阶地的拔河高度、年龄以及位错信息。若阶地拔河高度近似呈等差排列,即各级阶地上侧向侵蚀量近似相等的情况下,利用高-低阶地累积位错量之差与对应阶地年龄差来计算滑动速率,可以在一定程度上减少上述2种因素对滑动速率的影响。应用差值法计算得到阿尔金与昆仑断裂的滑动速率为4.7~8.8mm/a,与前人获得的地质学滑动速率、测地学滑动速率、缩短速率以及强震复发周期结果一致。  相似文献   

Mechanism on Moho offset induced by aseismic slip of deeply buried faults          下载免费PDF全文

Zhen Fu  Hai-ming Zhang  Shu-wen Dong 《地震科学（英文版）》2014,27(3):247-256

Recent high-resolution deep seismic reflection profile across the Kunlun fault in northeastern Tibet shows clearly that the Moho is cut off by a complex thrust fault system. Moho offset is a general phenomenon, but little is known about the dynamic mechanism. In this study, contact models with Maxwell materials are used to simulate the mechanical process of Moho offset induced by the aseismic slip of deeply buried faults. Based on the seismic reflection data, we project a single fault model and a complex fault system model with two faults intersecting. The deformations of the Moho, the aseismic slips, and contact stresses on faults in different models are discussed in detail. Results show that the Moho offset might be produced by aseismic slip of deeply buried faults, and the magnitude is influenced by the friction coefficient of faults and the viscosity of the lower crust. The maximum slip occurs near the Moho on the single fault or at the crossing point of two intersecting faults system. Stress concentrates mainly on the Moho, the deep end of faults, or the crossing point. This study will throw light on understanding the mechanism of Moho offset and aseismic slip of deeply buried faults. The results of complex fault system with two faults intersecting are also useful to understand the shallow intersecting faults that may cause earthquakes.  相似文献   

Holocene slip rate and paleoearthquake records of the Salt Lake segment of the Northern Zhongtiaoshan Fault,Shanxi Province   总被引：1，自引：0，他引：1  

SI SuPei  LI YouLi  Lü ShengHua  WANG YiRan 《中国科学:地球科学(英文版)》2014,57(9):2079-2088

The Northern Zhongtiaoshan Fault is a major deep fault at the southern margin of the Yuncheng Basin. There have been few studies on the fault, and the historical earthquakes are few and weak. However, the intensity of activity on the fault should never be underestimated. Through interpretations of aerial images, topography measurements and excavation of trenches, this paper studied the fault distribution, the surface deformation and the activity of the normal fault south of Salt Lake near the city of Yuncheng. By tracing faults in the three trenches, it was found that there had been at least three large paleoseismic events, at 1–3.5, 3.6–4.4 and 7.4–8.8 ka BP. Employing 14 C dating, we determined the same gravel layers in the uplifted side and downthrown side. Making differential Global Positioning System measurements of the vertical difference and topographic profile, we obtained the mean slip rate of the Northern Zhongtiaoshan Fault since 24.7 ka BP(0.75±0.05 mm/a). Using the results of relevant studies, we calculated the possible vertical fault displacement of one earthquake(2.35 m) and obtained the recurrence interval of characteristic earthquakes as 2940–3360 a after dividing the displacement by the mean slip rate.  相似文献   

基于蚁群算法的严格最大剩余推力临界滑动面搜索     

孙聪  郑宏  李春光  孙冠华 《岩土力学》2014,35(10):3021-3026

临界滑动面搜索一直是边坡稳定性分析中十分重要的课题,由于极限平衡法具有理论简单,易于被工程师掌握的优点,因此,仍在工程应用中占主导地位。剩余推力法是国内学者提出的一种简单实用且有较高精度极限平衡法,已被纳入国家规范。针对目前剩余推力法条间力假设简单,只考虑了力的平衡而忽略力矩平衡的缺点,通过Spencer法迭代构造了严格剩余推力法边坡临界滑动面搜索优化的模型,并结合蚁群算法搜索出了最大的剩余推力相应的临界滑动面。该模型具有精度高,收敛快的特点。最后给出的两个算例与传统的蚁群算法直接搜索安全系数最小得到的结果做了比较,表明了本文方法的正确性。  相似文献   

相遇蚁群算法在边坡非圆弧临界滑动面搜索中的应用研究     

高玮  张飞君 《岩土力学》2014,35(Z1):391-398

边坡非圆弧临界滑动面搜索是边坡稳定计算中的一个关键问题,其实质为安全系数最小的滑动路径搜索问题,采用效果良好的路径搜索算法--蚁群算法是目前研究的热点。为了克服传统蚁群算法效率低、效果差的缺点,基于蚂蚁正反向搜索相遇形成完整路径的原理,提出了一种相遇蚁群算法。将该算法用于边坡非圆弧滑动面搜索问题,提出了一种非圆弧临界滑动面搜索的新方法。通过2个边坡的算例计算及一个水库岸坡的工程应用,验证了新算法的有效性。计算结果表明,相遇蚁群算法无论是整个搜索范围还是从某一点起的搜索范围都要比一般蚁群算法大,所以相遇蚁群算法在搜索边坡临界滑动面时所得到解的多样性也要比一般蚁群算法好,因此,相遇蚁群算法的搜索范围能以较大的概率包含全局最优解,算法最终也能以较大概率搜索到全局最优解。最终,相遇蚁群算法可以在更大的范围内以更快的速度找到边坡的临界滑动面。  相似文献   

湖南桑植-石门复向斜走廊剖面构造特征分析   总被引：10，自引：5，他引：5  

郭建华  朱美衡  刘辰生  刘学锋  张或丹  王明艳 《大地构造与成矿学》2005,29(2):215-222

为了查明桑植—石门复向斜的地表、地下构造特征及其相互间的关系,采取了详细的地表走廊剖面的测量,以及结合地震勘探资料和大地电磁测深(MT)资料的综合解释。桑植—石门复向斜可进一步划分为四个次一级的构造带,从北向南依此是:堰塘湾构造带、四望山构造带、江垭构造带及教子垭构造带。江垭构造带和教子垭构造带的地面构造特征与地下构造特征具有一致性,基本上为构造简单的北倾斜坡;而四望山构造带的地面构造特征与地下构造特征存在着明显的不协调性。这种变形特征可解释为沿盖层间滑脱面的逆冲,以及断弯背斜的形成,上覆构造层中的褶皱向下消失在滑脱面上,形成所谓的“无根褶皱”。  相似文献   

Dextral‐Slip Thrust Faulting and Seismic Events of the Ms 8.0 Wenchuan Earthquake,Longmenshan Mountains,Eastern Margin of the Tibetan Plateau   总被引：1，自引：1，他引：0  

WU Zhenhan  DONG Shuwen  Patrick J. BAROSH  ZHANG Zuocheng  LIAO Huaijun 《《地质学报》英文版》2009,83(4):685-693

Abstract: Dextral-slip thrust movement of the Songpan-Garzê terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault (CLF) along a distance of ~250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1–EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0–10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10–42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextral-slip with minor thrust and slickensides plunging 25°–35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42–60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60–95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°–50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.  相似文献   

地震剖面中走滑断层旋向判断模型——以塔东阿拉干北断层为例     

卢华复  王胜利 《大地构造与成矿学》2009,33(1)

地震剖面解释中尚无走滑断层旋向的直接判别标志,本文提出了一个在地震剖面解释中直接判断走滑断层旋向的模型。该模型假定断层作用前既存的某个地层厚度有变化,则垂直或斜交地层厚度变化方向的走滑断层必定在穿过断层的地震剖面中两盘地层厚度不等。确定了地层厚度变化方向,又测定了剖面中两盘地层厚度,则走滑断层的旋向就可以唯一地确定下来。穿过塔里木盆地东部阿拉干北右行走滑断层的地震剖面资料证实了这一模型的适用性。  相似文献   

康西瓦断裂带晚新生代构造地貌特征及其构造意义   总被引：2，自引：0，他引：2       下载免费PDF全文

何哲峰  黎敦朋  刘健  赵越 《第四纪研究》2009,29(3):616-624

文章详细调查了康西瓦断裂带发育的断层崖、断层陡坎、地震破裂带、错断山脊、拉分盆地、挤压脊、偏心洪积扇、错断水系等新构造运动形迹,这些新构造运动形迹表明了康西瓦断裂带在晚新生代以来发生了强烈的左旋走滑运动,并兼有正滑运动分量。数字地形高程模型(DEM)分析表明康西瓦断裂西端终止于塔什库尔干谷地东部的瓦恰河谷内,东端与著名的阿尔金断裂带相连。如果以喀拉喀什河和玉龙喀什河为参照系,康西瓦断裂晚新生代以来的左旋走滑累积位移量可达 80～85km,根据断裂带 8～12mm/a的长期走滑速率,推测康西瓦断裂带新生代以来的左旋走滑运动开始于约10Ma。结合我们获得的断裂带两侧岩浆岩的年龄,表明康西瓦断裂带左旋走滑运动的开始时代为晚中新世,现今康西瓦地区的构造地貌格局很可能是中新世晚期以来强烈的左旋走滑运动形成的。  相似文献   

龙门山彭县－灌县断裂的活动构造于地表破裂          下载免费PDF全文

李勇　黄润秋　A.L.Densmore 周荣军闫　亮 N.Richardson 董顺利 M.A.Ellis 张毅 何玉林陈  浩乔宝成马博琳 《第四纪研究》2009,29(3):403-415

2008年5月12日在龙门山发生了8.0级特大地震,彭县－灌县断裂亦发生了同震地表破裂。在前期对龙门山活动构造研究的基础上,汶川特大地震发生后,在灾区进行了多次的野外调查和国际合作考察,重点对汶川地震的地表破裂和地质灾害开展了详细的详细野外地质填图,利用全站仪和GPS对地表破裂进行了精确的测量,研究了的地表破裂地貌错位、构造组合和运动学,已实地测得地表破裂数据70余组(其中彭县－灌县断裂地表破裂数据20余组)。文章以彭县－灌县断裂地表破裂为切入点,在彭县－灌县断裂的关键部位开展了详细的野外地貌测量,主要测量了彭州磁峰、白鹿、绵竹金花和汉旺等地的地表破裂,标定了彭县－灌县断裂破裂带的垂向断距和水平断距,结果表明该地表破裂南西起于彭州磁峰,向北东延伸经白鹿、绵竹金花至绵竹汉旺,全长约 40～50km。地表破裂带沿彭县－灌县断裂带的走向断续分布,单个破裂长度在几米到500余米不等,破裂带切割了多种类型的地貌单元,包括山脉基岩、河流阶地、冲洪积扇、公路、桥梁等,同时也使道路发生拱曲、破坏和桥梁垮塌或移位。其以脆性破裂为特征,以逆冲－右旋走滑为特点,断面倾角较陡,北西盘为上升盘,南东盘为下降盘,垂直位错介于 0.39～2.70m之间,水平位错介于 0.20～0.70m,平均垂直位错为1.6m,平均水平位错为0.6m; 地表最大错动量的地点位于彭州白鹿镇,其中最大垂直断错为 2.7±0.2m,最大水平断错为 0.7±0.2m。垂直位错与水平位错量之间的比值为2 ∶1,表明该地震地表破裂带不仅存在逆冲运动分量和右旋走滑运动分量,而且逆冲运动分量大于右旋走滑运动分量,显示了彭县－灌县断裂破裂带具有以逆冲和缩短作用为主、右旋走滑作用为辅的破裂性质。其与映秀－北川断裂带的地表破裂相比较,该断裂的地表破裂程度远小于映秀－北川断裂带的地表破裂程度,主要表现在地表破裂的长度较短,垂直位错和水平位错也相对较小,而且为以逆冲作用为主。初步研究结果表明,彭县－灌县断裂与映秀－北川断裂地表破裂的平面组合样式显示为两条在平面上近于平行的北东向地表破裂带,其间由一条南北向的次级地表破裂带(小鱼洞断裂)将它们相连结,地下破裂面的剖面组合样式显示为叠瓦状,并在汶川地震震源附近或震源的上方相连的,是同“根”的。  相似文献