THE TECTONIC ACTIVITY CHARACTERISTICS OF AWANCANG FAULT IN THE LATE QUATERNARY,THE SUB-STRAND OF THE EASTERN KUNLUN FAULT          下载免费PDF全文

LI Chen-xia  YUAN Dao-yang  YANG Hu  XU Xi-wei 《地震地质》2016,38(1):44-64

It is well known that the slip rate of Kunlun Fault descends at the east segment, but little known about the Awancang Fault and its role in strain partitioning with Kunlun Fault. Whether the sub-strand(Awancang Fault) can rupture simultaneously with Kunlun Fault remains unknown. Based on field investigations, aerial-photo morphological analysis, topographic surveys and ¹⁴C dating of alluvial surfaces, we used displaced terrace risers to estimate geological slip rates along the Awancang Fault, which lies on the western margin of the Ruoergai Basin and the eastern edge of the Tibetan plateau, the results indicate that the slip rate is 3mm/a in the middle Holocene, similar to the reduced value of the Kunlun Fault. The fault consists of two segments with strike N50° W, located at distance about 16km, and converged to single stand to the SE direction. Our results demonstrate that the Awancang fault zone is predominantly left-lateral with a small amount of northeast-verging thrust component. The slip rates decrease sharply about 4mm/a from west to east between the intersection zone of the Awancang Fault and Kunlun Fault. Together with our previous trenching results on the Kunlun Fault, the comparison with slip rates at the Kunlun fault zone suggests that the Awancang fault zone has an important role in strain partitioning for east extension of Kunlun Fault in eastern Tibet. At the same time, the 15km long surface rupture zone of the southeast segment was found at the Awancang Fault. By dating the latest faulted geomorphologic surface, the last event may be since the 1766±54 Cal a BP. Through analysis of the trench, there are four paleoearthquake events identified recurring in situ on the Awancang Fault and the latest event is since (850±30)a BP. The slip rate of the Awancang Fault is almost equivalent to the descending value of the eastern part of the east Kunlun Fault, which can well explain the slip rate decreasing of the eastern part of the east Kunlun Fault(the Maqin-Maqu segment)and the characteristics of the structure dynamics of the eastern edge of the Tibet Plateau. The falling slip rate gradient of the eastern Kunlun Fault corresponds to the geometric characteristic. It is the Awancang Fault, the strand of the East Kunlun Fault that accommodates the strain distribution of the eastward extension of the east Kunlun Fault. This study is helpful to seismic hazard assessment and understanding the deformation mechanism in eastern Tibet.  相似文献   

利用断层滑动资料反演郯庐断裂带山东段第四纪构造应力场     

荆振杰  谢富仁  王华林  雷惊昊  刘风香 《震灾防御技术》2016,11(3):463-471

郯庐断裂带(即郯城-庐江断裂带)是纵贯中国东部大陆边缘的一条巨型断裂带,整体为北北东走向。它的形成和演化对中国东部中生代以来的地质演化有明显控制作用,同时又是一条现今地震活动较为活跃的地震带,因此对郯庐断裂带周边构造应力场的研究具有重要的意义。采用野外观测取得的10个测点共206条活断层擦痕数据,利用断层滑动资料反演构造应力张量的方法,计算获得了研究区现代构造应力场主要特征:郯庐断裂及其周边地区现代构造应力场以北东-东西向挤压、北西-近南北向拉张为特征,其最大主压应力(σ1)方向为64°一106°,平均倾角23%最小主压应力(σ3)方向为332°~14°,平均倾角14°;中间主应力(σ2)倾角较陡,近垂直,应力结构为走滑型。  相似文献   

Long aseismic slip duration of the 2006 Java tsunami earthquake based on GPS data          下载免费PDF全文

Rio Raharja  Endra Gunawan  Irwan Meilano  Hasanuddin Z. Abidin  Joni Efendi 《地震科学（英文版）》2016,29(5):291-298

The Java earthquake occurred on July 17,2006 with magnitude 7.8 associated to the subduction process of Indo-Australian plate and Sundaland block off southwestern coast of Java. We present postseismic deformation parameters of the 2006 Java earthquake analyzed using campaign GPS observation from 2006 to 2008 and continuous observation from 2007 to 2014. We use an analytical approach of logarithmic and exponential functions to model these GPS data. We find that the decay time in the order of hundreds of days after the mainshock as observed by 8 years' data after the mainshock for magnitude 7 earthquake is longer than a general megathrust earthquake event. Our findings suggest that the 2006 Java earthquake which is considered as ‘‘tsunami earthquake' most probably occurred in the region that has low rigidity and tends to continuously slip for long time periods.  相似文献   

芦山地震有限断层混合震源模型模拟     

孙晓丹  王罡  刘成清 《地震工程与工程振动》2013,33(4)

建立了基于有限断层的芦山地震的混合震源模型,突出破裂面上滑动量分布中凹凸体的主导作用,同时借助k平方模型表达对震源复杂性认识尚不够深入所带来的随机性.混合震源模型中全局震源参数均值与局部震源参数均值的确定,主要依据统计的半经验标定公式,进一步借助截断正态分布将区域地震、地质构造、地震活动性提供的参数限值结合起来,生成最终的震源参数值.基于上述思路,本文共建立了30组芦山地震混合震源模型,进而以芦山地震8个近场观测台站为试算点,借助地震动反应谱残差评价的方法,从30组模型中选定了表达“平均”特征的混合震源模型.  相似文献   

震源动力学破裂过程数值模拟研究   总被引：2，自引：1，他引：1  

张丽芬  姚运生 《地震学报》2013,35(4):604-615

首先阐述了震源动力学过程研究的重要意义, 在此基础上, 研究了复杂的断层几何形态及介质模型对动力学破裂过程的影响, 并对常用的有限元方法、 离散元方法、 有限差分方法和边界积分方程方法等进行了相应介绍. 讨论了这些数值模拟方法各自的优缺点, 建议在方法的选择上应视具体问题及计算的精度而定. 最后对动力学数值模拟的关键部分, 滑动摩擦准则进行了论述. 常用的滑动摩擦准则有滑动弱化准则、 速率弱化准则和速率-状态依赖摩擦准则. 在单纯考虑某个地震的动力学破裂传播过程时, 滑动弱化准则较为常用, 其中滑动弱化距离的选取至关重要. 但若考虑整个地震循环, 速率-状态依赖摩擦准则更为合适.   相似文献   

江西九瑞矿集区硅质断裂磨砾岩带的厘定及其成岩成矿意义   总被引：4，自引：4，他引：0  

蒋少涌  徐耀明  周巍  朱志勇  孔凡斌  孙岩 《岩石学报》2012,28(10):3076-3086

在九瑞矿集区研究叠合断裂和叠加成矿作用的基础上,我们进一步详细研究了出露在洋鸡山-丁家山-望夫山一线的硅质角砾岩,指出它们不是原先认为的石炭系沉积硅质岩,而应属于一种断裂磨砾岩,并深入探究其形成过程及与成矿之关系.断裂磨砾岩是断裂分带结构成熟的标志之一,多在剪切作用和热液作用下,断裂岩石经硅化-破裂-碎裂-粉碎-研磨,形成具有一定圆度和球度,大小差异较大的磨砾或磨粒,且又会反复的集结-破碎,不断拓宽断裂构造形成磨砾-角砾岩带.本文研究的断裂磨砾岩,呈北东向展布,延长达十几千米.成分上以硅化角砾岩为主,SiO2含量一般大于90％,石英颗粒由隐晶到显晶.一些角砾岩中含Fe2O3较高,有可能是原先的硫化物经氧化形成的褐铁矿.本区洋鸡山-丁家山-望夫山一线产出的断裂磨砾-角砾岩带,很可能是燕山期构造-岩浆-成矿事件的产物.在城门山和武山铜矿,我们之前的工作己发现存在产于泥盆系五通组和石炭系黄龙组层滑构造体系中的黄铁矿角砾岩,则有可能属于海西期同生断裂活动的产物.因此,这些不同的角砾岩具有多阶段活动和叠加成矿的特征.本文还进一步指出,九瑞地区其他层位(如泥盆系与志留系之间、志留系与奥陶系之间)发育的层滑构造体系和断裂角砾岩及热液蚀变岩,也很可能是成矿有利部位,值得今后找矿工作的关注.  相似文献   

Young,active conjugate strike–slip deformation in West Sichuan: evidence for the stress–strain pattern of the southeastern Tibetan Plateau     

《International Geology Review》2012,54(9):991-1012

The active kinematics of the eastern Tibetan Plateau are characterized by the southeastward movement of a major tectonic unit, the Chuan-Dian crustal fragment, bounded by the left-lateral Xianshuihe–Xiaojiang fault in the northeast and the right-lateral Red River–Ailao Shan shear zone in the southwest. Our field structural and geomorphic observations define two sets of young, active strike–slip faults within the northern part of the fragment that lie within the SE Tibetan Plateau. One set trends NE–SW with right-lateral displacement and includes the Jiulong, Batang, and Derong faults. The second set trends NW–SE with left-lateral displacement and includes the Xianshuihe, Litang, Xiangcheng, Zhongdian, and Xuebo faults. Strike–slip displacements along these faults were established by the deflection and offset of streams and various lithologic units; these offsets yield an average magnitude of right- and left-lateral displacements of ～15–35 km. Using 5.7–3.5 Ma as the time of onset of the late-stage evolution of the Xianshuihe fault and the regional stream incision within this part of the plateau as a proxy for the initiation age of conjugate strike–slip faulting, we have determined an average slip rate of ～2.6–9.4 mm/year. These two sets of strike–slip faults intersect at an obtuse angle that ranges from 100° to 140° facing east and west; the fault sets define a conjugate strike–slip pattern that expresses internal E–W shortening in the northern part of the Chuan-Dian crustal fragment. These conjugate faults are interpreted to have experienced clockwise and counterclockwise rotations of up to 20°. The presence of this conjugate fault system demonstrates that this part of the Tibetan Plateau is undergoing not only southward movement, but also E–W shortening and N–S lengthening due to convergence between the Sichuan Basin and the eastern Himalayan syntaxis.  相似文献   

Structural style and tectono-stratigraphic evolution of the Neogene–Quaternary Siderno Basin,southern Calabrian Arc,Italy     

《International Geology Review》2012,54(4):468-481

The Neogene–Quaternary Siderno Basin is located in the southern Calabrian Arc, along an E–W transect including the Ionian side and part of the Tyrrhenian margin. The orogenic belt was generated by ongoing northward subduction of Ionian oceanic lithosphere beginning in the Early Cretaceous. Since the Oligocene, the area has experienced complex tectonics, including NW–SE-oriented pull-apart basins. The forearc region contains >2000 m of Oligocene-to-Quaternary strata that cover pre-Tertiary rocks. The succession forms an E-dipping monocline, with tectonic growth structures increasing upward. Erosional truncations and thickness variations suggest a different evolution for the Siderno Basin, which in comparison with northern and southern parts of the Ionian accretionary wedge, evolved differently during the Serravallian–Tortonian stages. NW–SE and NE–SW fault systems are dominant, the first exhibiting strike–slip and normal kinematics in the Nicotera–Gioiosa and Molochio–Antonimina fault zones. These structures were active during infilling of the Neogene basin, and represent a complex transfer zone.

The NE–SW system shows two types of tectonic kinematics: (1) a compressive stage, with NW–SE-orientated shortening, responsible for inversion tectonics documented by east-verging folds, thrusts, and back-thrusts, and (2) emplacement of the variegated clay during the Langhian, which is related to back-thrust propagation. The strike–slip accommodated stress generated in the accretionary prism in response to subduction of Ionian lithosphere and progradation of the accretionary front of the Calabrian forearc.  相似文献   

浅析四川汶川索桥滑坡稳定性及治理措施     

阳建新  李发菊  陈田华 《华北地质》2012,(3):210-213

根据工程地质测绘及勘探成果资料,在对四川汶川县索桥滑坡产生的成因机理和破坏模式进行分析判断的基础上,对两个潜在滑移面在不同的工况下的稳定性进行了分析评价,确定岩土交界面为最危险滑面.在此前提下对边坡发展趋势及激发诱因进行科学预测,认为在暴雨或余震等诱发下边坡极有可能失稳,并有针对性的制定了应急防治与永久根治的综合治理方案.  相似文献   

历元间差分定位模型的粗差探测法探测周跳   总被引：1，自引：0，他引：1  

刘先冬  宋力杰  黄令勇 《测绘科学》2011,36(6):58-60

假设前一历元的测站点为已知点,当前历元的测站点为未知点,当前历元和前一历元相同卫星的相位观测值取差作为观测值,观测值与当前历元点位坐标的函数关系式称为历元间差分定位模型.本文以历元间差分定位模型构造误差方程,进行最小二乘平差,提出应用Baarda数据探测法对差分观测值进行粗差探测,可准确确定观测值中的周跳.实际算例验证...  相似文献