A distributed thermodynamic model for energy and mass balance computation: FEST–EWB     

Chiara Corbari  Giovanni Ravazzani  Marco Mancini 《水文研究》2011,25(9):1443-1452

  相似文献   

P–T–t evidence for mechanisms of vertical tectonic motion in a contractional orogen: north-western US and Canadian Cordillera     

Whitney  Miller  & Paterson 《Journal of Metamorphic Geology》1999,17(1):75-90

The >1800 km long Coast Mountains–North Cascades orogen of the Canadian Cordillera and north-western US developed as a continental magmatic arc. Metamorphic rocks in the orogen contain widespread evidence for burial of supracrustal rocks to depths of c. 40 km, followed by nearly isothermal decompression to depths of <10 km. Near many shallowly-emplaced, mid-Cretaceous plutons, low-pressure contact metamorphic effects were overprinted by high-pressure regional metamorphic minerals and textures, as evidenced by kyanite±staurolite pseudomorphs after andalusite in metapelitic rocks. Therefore, near-pluton rocks record the loading history of the orogen. Metapelitic rocks not associated with plutons only preserve evidence for high-pressure conditions and/or high-temperature decompression, as indicated, for example, by sillimanite and cordierite after kyanite and garnet, respectively. Petrological evidence for burial and decompression is therefore recorded in different rocks. Various regions of the orogen differ in timing of metamorphism, the overall shape of P–T paths and the relative timing and regional extent of the high-pressure event, but most of these data and observations are consistent with thrusting and/or pure shear thickening as primary loading mechanisms throughout the orogen, as opposed to magma-dominated loading. This interpretation is further supported by comparison with thermal models, which demonstrate that the P–T paths are consistent with simultaneous thrusting and folding at a high initial geothermal gradient (35–40 °C km^?1) in much of the orogen. A high geothermal gradient supports tectonic models invoking intra-arc contraction and suggests that magmatism played an important role in regional temperature-time paths. This tectonic-thermal history may be typical of other contractional orogens and illustrates the importance of large vertical displacement of crust in magmatic arcs.  相似文献   

Modelling river water temperature using deterministic,empirical, and hybrid formulations in a Mediterranean stream     

Rafael Marcé  Joan Armengol 《水文研究》2008,22(17):3418-3430

River water temperature is a common target of water quality models at the watershed scale, owing to its principal role in shaping biogeochemical processes and in stream ecology. Usually, models include physically‐based, deterministic formulations to calculate water temperatures from detailed meteorological information, which usually comes from meteorological stations located far from the river reaches. However, alternative empirical approaches have been proposed, that usually depend on air temperature as master variable. This study explored the performance of a semidistributed water quality application modelling river water temperature in a Mediterranean watershed, using three different approaches. First, a deterministic approach was used accounting for the different heat exchange components usually considered in water temperature models. Second, an empirical approximation was applied using the equilibrium temperature concept, assuming a linear relationship with air temperature. And third, a hybrid approach was constructed, in which the temperature equilibrium concept and the deterministic approach were combined. Results showed that the hybrid approach gave the best results, followed by the empirical approximation. The deterministic formulation gave the worst results. The hybrid approach not only fitted daily river water temperatures, but also adequately modelled the daily temperature range (maximum–minimum daily temperature). Other river water features directly dependent on water temperature, such as river intrusion depth in lentic systems (i.e. the depth at which the river inflow plunges to equilibrate density differences with lake water), were also correctly modelled even at hourly time steps. However, results for the different heat fluxes between river and atmosphere were very unrealistic. Although direct evidence of discrepancies between meteorological drivers measured at the meteorological stations and the actual river microclimate was not found, the use of models including empirical or hybrid formulations depending mainly on air temperature is recommended if only meteorological data from locations far from the river reaches are available. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

拉萨地块松多榴辉岩的变质演化过程:NCKMnFMASHTO体系中的相平衡关系   总被引：2，自引：0，他引：2       下载免费PDF全文

黄杰  田作林张 聪杨经绥陈 梅 《中国地质》2015,(5):1559-1571

拉萨地块松多榴辉岩主要矿物组合为石榴子石、绿辉石、角闪石、多硅白云母、绿帘石、金红石。石榴子石环带不明显,核部成分均一,从核部到边部,镁铝榴石和钙铝榴石含量降低,可能分别记录了榴辉岩峰期及退变质过程信息。绿辉石显示微弱的成分环带,硬玉含量从核部到边部略有升高,部分绿辉石边部发育韭闪石退变质边,反映了在减压过程中外来流体进入体系的过程。多硅白云母具有高的Si含量(3.5~3.6),其中石榴石包体中的多硅白云母相对基质中的白云母有更高的Si值。本文利用Thermocalc变质相平衡模拟软件,结合详细岩相学观察,在NCKMn FMASHTO体系下,模拟松多含多硅白云母榴辉岩的变质演化过程。其中,榴辉岩峰期矿物组合为g+o+law+phn+ru,石榴石核部最大镁铝榴石值和石榴子石包体中多硅白云母最大Si值确定的榴辉岩峰期温压条件约为620℃,32×105Pa,榴辉岩经历了近等温降压的退变质过程。相平衡模拟结果表明拉萨地块松多榴辉岩经历了超高压变质作用过程,并经历了相对快速的折返过程到中部地壳层次。  相似文献   

三峡水库运行初期的泥沙淤积特点   总被引：3，自引：0，他引：3       下载免费PDF全文

李文杰  杨胜发  付旭辉  肖毅 《水科学进展》2015,26(5):676-685

针对三峡蓄水运行后的泥沙淤积问题,基于实测资料,采用输沙率法和断面法分析了三峡水库运行初期的泥沙淤积特点.结果表明:三峡水库2003—2013年泥沙淤积总量为15.31亿t,平均排沙比为24.5%,均较论证阶段降低;库区泥沙淤积主要分布在常年回水区的宽谷和弯道河段,宽谷段全断面发生淤积、弯道断面流速较小一侧淤积、峡谷无累积性淤积;常年库区近坝段泥沙淤积速度逐年减小,而上段泥沙淤积速度则呈增大趋势;淤积物粒径沿程分选不明显,常年回水区淤积物中值粒径多在0.01 mm以下.库区峡谷段深泓线无明显变化、尚未出现泥沙淤积三角洲、库尾泥沙淤积上延和尾水抬高不明显,据此初步推断峡谷河段存在富余挟沙力而成为局部侵蚀基准面,整个库区将无统一平衡比降的趋势.  相似文献   

Corrections to Solar Thermal Structure when a Turbulent Magnetic Field is Included     

Yi Liao  Shao-Lan BiNational Astronomical Observatories  Yunnan Observatory  Kunming   《中国天文和天体物理学报》2004,4(5):490-498

Correction of non-ideal effect due to a magnetic fluctuating tensor is derived from the ideal MHD equations. The inclusion of a magnetic turbulent field leads to modifications of the hydrostatic equilibrium equation and thermodynamical variables such as the temperature T, the adiabatic exponent γ, the adiabatic temperature gradient △↓ad and the temperature gradient △↓. In particular, the modifications in the adiabatic and radiative temperature gradients will result in a change in the Schwarzchild criterion, hence in the location of the base of the convective zone. Incorporating the modifications, we construct a modified thermodynamical equilibrium structure of the Sun.  相似文献   

Effect of perturbation on the location of libration point in the robe restricted problem of three bodies     

A. K. Shrivastava  Debnarayan Garain 《Celestial Mechanics and Dynamical Astronomy》1991,51(1):67-73

The effect of small perturbation in the Coriolis and centrifugal forces on the location of libration point in the ‘Robe (1977) restricted problem of three bodies’ has been studied. In this problem one body,m ₁, is a rigid spherical shell filled with an homogeneous incompressible fluid of densityϱ ₁. The second one,m ₂, is a mass point outside the shell andm ₃ is a small solid sphere of densityϱ ₃ supposed to be moving inside the shell subject to the attraction ofm ₂ and buoyancy force due to fluidϱ ₁. Here we assumem ₃ to be an infinitesimal mass and the orbit of the massm ₂ to be circular, and we also suppose the densitiesϱ ₁, andϱ ₃ to be equal. Then there exists an equilibrium point (−μ + (ɛ′μ)/(1 + 2μ), 0, 0).  相似文献   

The role of current velocity in structuring eelgrass (Zostera marina L.) meadows     

Mark S. Fonseca  Joseph C. Zieman  Gordon W. Thayer  John S. Fisher 《Estuarine, Coastal and Shelf Science》1983,17(4):367-380

Measurements of velocity profiles, bathymetry, and surface sediment characteristics across eelgrass (Zostera marina L.) meadows yielded information on community development processes and functional attributes of this ecosystem. Height/length ratios of the meadows were positively correlated with tidal current velocity. Low, medium, and high current regimes were separated by surface current velocities of approximately 50 and 90 cm s^?1. Z. marina can tolerate approximately 120–150 cm/sec current velocities in the areas studied. Per cent silt-clay and organic matter content of the surface sediments are negatively associated with shear velocity, suggesting that meadows in high current areas are sources while meadows in low current areas are sinks of autochthonous detritus. Current velocity maintains seagrass meadows at different equilibrium levels (relative climaxes). We theorize these different equilibrium levels provide unequal habitat utilization potentials for the associated faunal community.  相似文献   

Seismic bearing capacity of shallow strip footings   总被引：6，自引：0，他引：6  

Deepankar?ChoudhuryEmail author  Kanakapura?S.?Subba Rao 《Geotechnical and Geological Engineering》2005,23(4):403-418

Seismic bearing capacity of shallow strip footings in soil has been obtained in the form of pseudo-static seismic bearing capacity factors N_cd, N_qd and N_d, denoting the cohesion, surcharge and unit weight components, respectively, by an extensive numerical iteration technique. Limit equilibrium method of analysis with composite failure surface is assumed. The validity of the principle of superposition is examined. Effects of both the horizontal and vertical seismic acceleration coefficients have been found to always reduce the ultimate bearing capacity significantly. Results obtained by the present method of analysis are compared with the available results and are found to be the least in the seismic case.  相似文献   

Optimum design of nailed soil slopes   总被引：12，自引：0，他引：12  

C.?R.?PatraEmail author  P.?K.?Basudhar 《Geotechnical and Geological Engineering》2005,23(3):273-296

In this paper, a generalized method of computer based optimum design of soil-nailed slopes is reported. A limit equilibrium formulation satisfying overall and internal equilibrium and considering the effect of tensile resistance of the reinforcement has been used in computing the stability of nailed slopes. The quantity of steel requirement for raising the factor of safety to a desired value is estimated. The location, size (length and diameter) and orientation of the nails and the location and shape of the critical shear surface have been treated as variables. The solutions have been isolated by formulating the problem as one of non-linear programming. The applicability of the developed method has been verified by comparing the predicted failure surfaces with those observed in model tests as well as in the field and also reported theoretical results.  相似文献