钾长石粉酸浸除铁的实验研究   总被引：8，自引：1，他引：8  

郑骥  马鸿文等 《地球科学》2001,26(6):657-660

在利用钾长石粉合成沸石分子筛和制取碳酸钾技术中，铁的存在会降低沸石的白度。对北京平谷、天津蓟县、内蒙白云鄂博三地钾长石粉进行硫酸酸浸除铁实验，获得最大铁浸出率分别为88．6％、93．2％和64．6％，且前两地钾长石粉中铁的浸出行为相似，酸浸除铁效果均优于白云鄂博钾长石粉。采用正交实验法研究硫酸浓度、酸浸温度和时间对除铁效果的影响，表明三者对不同地区钾长石粉酸浸除铁效果的影响程度各不相同。钾长石酸浸除铁反应开始时，铁的溶解极快，反应速率主要由化学反应控制；其后溶解相对缓慢，反应速率则由扩散作用控制。  相似文献   

燃煤烟气中SO2治理方法综述   总被引：2，自引：0，他引：2  

余江  陈攀江  龙炳清  宋薇薇  赵仕林 《地质灾害与环境保护》2001,12(2):45-48

对燃煤烟气中SO2的脱除方法进行综述和分析。  相似文献   

下庄铀成矿古水热系统排泄区（减压区）铀成矿作用研究     

刘金辉  李学礼 《矿床地质》2001,20(3):259-264

形成于古水热系统排泄区（减压区）的下庄花岗岩型铀矿床是地下热水与岩石相互作用的产物。矿物流体包裹体水文地球化学分析表明，成矿期铀成矿古热水溶液气体成分主要为CO2，水化学类型为HCO3－Ca.Na型，F－Ca型和HCO3.F－K型。地球化学模式和热力学计算证明，热水溶液中铀的存在形式为UO2（CO3）2^2-,UO2F3^-和UO2F4^2-。热水溶液深循环过程中CO2的加入可使溶液铀沉淀临界电位值（EhC,U)明显降低，从而保持水－铀比电位值（ΔEhW,U)为正值（ΔEhW,U=EhW-EhC,U)使铀在深部相对还原的条件下仍能稳定迁移。当富铀成矿热液进入减压排泄区时，由于溶液物理－化学条件的改变，发生CO2脱气作用和中和还原作用，导致ΔEhW,U小于零，使铀沉淀、富集，最终形成花岗岩型铀矿床。  相似文献   

活性白云粉生产工艺及其物化性能研究   总被引：1，自引：0，他引：1  

贾建业  汤艳杰  王辅亚  王杨传  宁平  王建成  魏俊峰 《矿物学报》2001,21(3):439-442

活性白云粉（ABP）是在白云岩经过破碎、细粉碎、表面改性的基础上得到的一种新型改性功能填料。本文利用河南辉县市的拍石头和张村两地产出的白云岩作为实验原料，对其表面改性的实验方法、改性剂选择及用量、改性条件及改性效果等方面进行了一定的探讨，并且对改性前后的白云石粉体的粒度、比表面积等性能及红外光谱特征做了对比研究。生产工艺和物性测试研究表明：活性白云粉代替轻质碳酸钙作橡胶填料前景广阔；与轻钙相比，活性白云粉的粒度不够均匀，经优化和改善生产工艺条件，可望进一步提高其应用价值。  相似文献   

Cuttability assessment of hard coal seams     

R. Singh  J. K. Singh  T. N. Singh  B. B. Dhar 《Geotechnical and Geological Engineering》1995,13(2):63-78

Summary A number of field and laboratory tests have been carried out on more than 15 coal seams of compressive strengths ranging from 19 MPa to 44 MPa to evolve methods which would help in the selection of suitable coaling machines for hard coal seams. The effect of physico-mechanical properties on cuttability were studied in the laboratory for all these coal seams to identify the relevant parameters affecting the specific energy of coal cuttability. These data were subjected to regression analysis to find the best fit for estimation of laboratory specific energy of coal samples on the basis of simple laboratory and field tests for the strength parameters. Field studies were also conducted over a large number of active mechanized coal faces to study in situ cuttability along with the geo-mining conditions of the site. The field and the laboratory data so generated were correlated and an attempt is made to establish a relationship for estimating the field specific energy for a particular capacity of coaling machines by considering the geo-mining domain of the field in totality.  相似文献   

Incremental Growth of Plains-Type (Compactional) Folds in a Cratonic Environment as Revealed by the Sedimentary Sequence     

Merriam  Daniel F. 《Natural Resources Research》2003,12(1):27-40

The enigma of the origin and development of plains-type folds, as they were christened in the early 20th Century, essentially has been solved. The folds, a considerable distance from the tectonic disturbance, were formed by draping of sediments over differentially displaced Precambrian basement fault blocks. These Precambrian basement fault blocks controlled the location, size, and shape of the folds. Forces were transmitted through the rigid basement causing readjustment along the indigenous fracture/fault pattern formed much earlier. In the U.S. Midcontinent, the crystalline basement is overlain by a thin veneer of sediments, and once the structures were formed, they continued to develop as evidenced by features in the overlying sediments. As the stress was transmitted through the basement and then relaxed, the fault blocks moved differentially in concert to these outside forces. Sediment compaction and nondeposition over structural topographic highs reacted accordingly to form the features as seen today. To determine the structural history, structural closure on different horizons on the anticline is plotted in their appropriate stratigraphic position at depth. This gives a compaction line for each tectonically coherent segment. Similar segments show a relatively straightline with offsets at major unconformities indicating breaks in the continuum. It is at these breaks that the section can be stretched until the compaction line matches as a continuum with the resulting gap giving the approximate amount of missing section for that part of the rock column. Conversely, the amount of closure on a structure at depth for each line segment can be estimated by extrapolating downward in that segment. This technique to determine depth of burial and thus the amount of missing stratigraphic section from well data at numerous locations has been compared with estimates made by other methods and the results are similar. Where no other data are available or for quick estimates, then, it is proposed that this approach will give reasonable results and that the values can be used as a constraint in basin modeling.  相似文献   

遥感影像镶嵌时拼接缝的消除方法   总被引：29，自引：0，他引：29  

朱述龙  钱曾波 《遥感学报》2002,6(3):183-187

对现有的影像并接缝消除方法的优缺点进行了分析,提出了拼接缝消除的强制改正方法,并用大量的实际图像进行了试验。结果表明：所提出的方法具有较好的拼接缝消除效果,且算法简单,易于实现,可以处理彩色和黑白等多种图像。  相似文献   

弹性填料处理河道污水实验研究   总被引：1，自引：0，他引：1  

程洪  黄伟  莫斌  雷金勇  余谦  徐文炘 《矿产与地质》2006,20(2):174-177

采用弹性填料曝气生物膜法对污染的河道水体进行处理的实验研究,结果表明,在2m/h的流速、水温为16℃~18℃、气水比为1∶1的条件下,采用弹性填料的生物膜处理系统运转正常,不易发生堵塞或系统短流,系统此时的水力停留时间为3.5h左右,污水中的COD和NH3-N去除率稳定,其均值分别为49.4%和19.1%。  相似文献   

低本底多道γ能谱仪解谱应用软件的开发及应用     

樊卫花王卫萍  侯胜利 《岩矿测试》2006,25(1):31-34

介绍了低本底碘化钠探测器多道γ能谱仪测量分析软件中解谱技术的算法。解谱算法是基于复合谱等于样品中单核素谱的算术加和，将复合谱分解为单核素谱，进行比活度计算。通过自编软件进行实验测量，研究影响测量结果的因素。结果表明，程序选取高能峰合适。  相似文献   

利用一种自动识别算法移除天气雷达反射率因子中的亮带   总被引：2，自引：5，他引：2       下载免费PDF全文

陈明轩  高峰 《应用气象学报》2006,17(2):207-214

该文介绍了一种自动识别和移除雷达反射率因子资料中亮带的算法, 并对该算法进行了初步测试。该算法利用的是插值到直角坐标系中的雷达反射率因子资料, 其配置和运行也相对简单, 但却对移除亮带比较有效。首先, 设定一套雷达反射率因子垂直廓线的理想模板, 这些理想的模板能够在最大程度上反映不同亮带存在区域的雷达实际反射率因子的垂直廓线特征。然后, 在水平方向每个点上, 进行理想模板和实际反射率因子垂直廓线在垂直和水平两个方向上的拟合和差异计算, 来自动识别雷达反射率因子中存在的连续亮带区域。最后, 利用亮带之上和亮带之下的反射率因子值对亮带中的反射率因子值进行插值纠正, 就可以移除亮带。利用位于天津塘沽的我国新一代天气雷达 (CINRAD/SA) 的反射率因子资料, 通过个例分析和准业务运行试验, 均表明这个简单算法可以识别和移除绝大多数影响雷达定量降水估计的反射率因子亮带区域, 但是实际雷暴区域的反射率因子特征受到该算法的影响比较小。计算分析还表明, 在京津地区的初夏, 上述亮带区域一般容易出现在2.5 km左右的高度处。  相似文献