Behavior of Pile Groups under Lateral Load   总被引：2，自引：0，他引：2  

Yang Keji  Li Qixin Wang Fuyuan Associate Proferssor  Hehai University  Nanjing Engineer  Hehai University  Nanjing 《中国海洋工程》1991,(2)

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.  相似文献   

Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Overtopping Discharge of Wind-Waves on Simple Slope Dikes     

Yu Kuang-ming  Zhang Jiachang  Zhou Jiabao Professor  Senior Engineer  The River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing Senior Engineer  The River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing 《中国海洋工程》1991,(4)

An empirical formula for estimating the overtopping discharge of wind-waves on a smooth-impermeable-simple slope dyke is derived through model tests in this paper, it can be adopted by related design departments in the determination of the crest elevation of the dyke.  相似文献   

东营城区高精度三维地震采集方法研究   总被引：3，自引：0，他引：3  

胡立新  刘怀山  张进 《中国海洋大学学报(自然科学版)》2004,34(6):1075-1080

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。  相似文献   

A simple method for comparing age-length keys reveals significant regional differences within a single stock of haddock (Melanogrammus aeglefinus)     

Gerritsen  Hans D.; McGrath  David; Lordan  Colm 《ICES Journal of Marine Science》2006,63(6):1096-1100

  相似文献   

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins     

周锡礽  王乐芹王晖 朱福明 《中国海洋工程》2004,18(4):567-575

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.  相似文献   

基于塑性极限分析理论和神经网络响应面的结构系统可靠性分析     

闫宏生  胡云昌 《海洋工程》2003,21(2):1-7

根据多层神经网络映射存在定理，提出了基于神经网络响应面和塑性极限分析理论的结构系统可靠性分析的新方法。数值试验表明，该方法可以快速、高质量地求出结构系统可靠性指标，是一个具有发展前景的新方法。  相似文献   

基于模拟退火算法的饲料配方设计     

陈世希  李翠华  王渊源 《台湾海峡》2001,20(Z1):142-147

本文在饲料配方设计中首次引入新颖、高效的组合优化算法--模拟退火算法，并获得理想的数值结果，说明了在传统的饲料配方设计中高技术的应用可以获得更高的效益.  相似文献   

Ultimate strength of ship hulls under torsion     

Jeom Kee Paik  Anil K. Thayamballi  P. Terndrup Pedersen  Young Il Park 《Ocean Engineering》2001,28(8):51

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.  相似文献