梧州某安置小区滑坡分析与治理设计研究     

唐名富  姚柏华  张紫峰  段娜  周洁军 《矿产与地质》2016,(3):477-481

文章从地层岩性、地质构造、水文地质条件等方面阐述该滑坡的基本特征,运用传递系数法对滑坡进行了稳定性分析与评价,为滑坡治理设计提供了依据。根据计算结果提出了采用削坡、预应力锚索+格构梁+锚杆挂网喷射混凝土防护,并结合生物防护及地表排水措施,具有较高的实践和理论意义。  相似文献   

采空区输气管道弹性变形分析     

魏威 《矿产与地质》2016,(5):833-836

近年来输气管道工程的大规模建设,其不可避免地要通过一些煤矿采空沉陷区和地质构造复杂区域。煤矿采空沉陷区的地表移动变形必然会使上覆的输气管道发生变形、甚至破坏,因此,分析与预测煤矿采空区地埋输气管道的安全性具有重要意义。本文以西气东输一线为例,依据弹性理论分析计算,当管道下伏分别为土体和岩体时,输气管道破坏时的岩土体垮塌宽度,并统计在垮塌影响范围一定的条件下,岩土体垮塌宽度与管道变形及最小曲率半径之间的规律。结果表明,管道的弯曲变形与垮塌宽度之间呈递增关系。  相似文献   

湘西北寒武系沉积型镍钼矿成矿物质来源   总被引：1，自引：0，他引：1  

闫友谊 《江苏地质》2016,40(4):560-566

湘西北寒武系含矿丰富,在寒武系下统牛蹄塘组黑色岩系中赋存有磷矿、石煤、钒矿、铀矿,并有有色金属钼、镍矿及铂族元素矿物聚集。通过分析总结前人成果资料,探究镍钼矿成矿地质环境条件是在低温环境、有微生物参与及强还原环境中同生沉积,对寒武系沉积型镍钼矿成矿物质来源提出了明确的看法,即成矿物质来源于海底喷流-热水。  相似文献   

河元背地区绳索取心钻进泵压计算模型的建立与应用          下载免费PDF全文

康鑫  李生海  刘晓阳  王荣璟  段隆臣 《探矿工程》2016,43(2):28-31

泵压是反映金刚石绳索取心钻进时井内作业是否正常的重要参数。为了进一步研究泵压波动变化与实际钻进作业之间的关系,指导钻进工作的快速、安全开展,结合江西相山河元背地区CUSD2井实际泵压波动数据及相关钻进资料,建立了适用于本井的循环系统压力损失计算模型。对比分析模型计算的理论泵压与实际泵压的波动变化趋势,将模型应用于实际钻进,在此基础上预测后续地层的泵压波动区域范围,发现7 MPa的泵压安全值不再适用于后续地层钻进,调整设置泵压安全值为10 MPa,并利用邻井泵压波动数据进一步验证其可靠性。适当调整修正理论模型,使其可应用于河元背以及相山地区绳索取心钻进中,指导该地区钻探工作。  相似文献   

定向钻进敷设电缆保护管轨迹优化设计研究          下载免费PDF全文

魏志强 《探矿工程》2016,43(12):85-89

在老旧城区内采用定向钻进敷设地下管线,常常需要从已有的各类地下建（构）筑物或管线下方穿过,方案设计时就应考虑新建管道与之安全距离的取值问题。以厦门市某110 kV电力电缆的定向钻进工程的实际需求为出发点,在对国内现有规程规范及工程实例调查的基础上,对电力电缆保护管定向钻进敷设安全距离取值的影响因素进行分析,优化工程定向钻进敷设方案,指导该工程的建设,并为类似工程建设提供参考。  相似文献   

Compression limit state of HVAC submarine cables     

《Applied Ocean Research》2016

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.  相似文献   

琼东南盆地深水区新近系海底扇沉积特征与资源潜力   总被引：1，自引：1，他引：0  

左倩媚  张道军  王亚辉  李伟  陈杨  何小胡  党亚云 《海洋学报》2016,38(11):105-116

综合利用钻井、岩心、薄片及分析化验资料研究了琼东南盆地深水区新近系海底扇沉积特征,并利用最新的三维地震资料,通过井震精细标定、多属性融合技术、方差体切片、三维地貌砂体镂空等综合技术手段,精细刻画了海底扇砂体的空间分布特征。研究结果表明,深水区新近系海底扇是由陆架区的砂体滑塌并二次搬运形成,形成过程具有多期次性。受不同物源的影响,海底扇岩性和物性存在较大的差异。海底扇岩性及沉积构造具有砂质滑塌、碎屑流、浊流和深水底流改造的特征。海底扇的沉积微相、厚度、砂泥比和砂泥岩空间配置关系直接控制了地震振幅反射强度和频率的变化。砂体纵向叠置,横向连片,并被后期泥质水道切割分块形成多个岩性圈闭。综合分析认为,深水区海底扇砂体发育区烃源条件优越,储盖配置关系和圈闭条件良好,具备形成大中型岩性油气藏的有利条件,具有较大的油气勘探潜力。  相似文献   

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn   总被引：1，自引：1，他引：0  

曹留帅  朱军  万文彬 《海洋工程》2016,(1):57-68

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.  相似文献   

Uncertainty in dam safety risk analysis     

Gregory B. Baecher 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2016,10(2):92-108

The character and importance of uncertainty in dam safety risk analysis drives how risk assessments are used in practice. The current interpretation of uncertainty is that, in addition to the aleatory risk which arises from presumed uncertainty in the world, it comprises the epistemic aspects of irresolution in a model or forecast, specifically model and parameter uncertainty. This is true in part but it is not all there is to uncertainty in risk analysis. The physics of hazards and of failure may be poorly understood, which goes beyond uncertainty in its conventional sense. There may be alternative scenarios of future conditions, for example non-stationarity in the environment, which cannot easily be forecast. There may also be deep uncertainties of the type associated with climate change. These are situations in which analysts do not know or do not agree on the system characterisation relating actions to consequences or on the probability distributions for key parameters. All of these facets are part of the uncertainty in risk analysis with which we must deal.  相似文献   

脐带缆在潜器下放过程中的运动建模与仿真   总被引：1，自引：0，他引：1  

李霄霄  马宁  刘晗  顾解忡 《海洋工程》2016,34(2):47-55

潜器在下放布置过程中需要考虑变长度的脐带缆对其运动的影响,在考虑流的情况下,对脐带缆的有限差分模型进行了改进,并采用最小二乘方法求解由时间和空间上的中心差分格式离散后的非线性方程组。为了验证模型改进的有效性,将潜器在均匀定常流中水平匀速直航时的数值解与该特殊情况下的解析解进行比较,两组解的吻合不仅证实了模型改进的有效性,而且表明上述数值计算方法是可靠且有效的。在潜器下放布置运动给定的情况下,脐带缆的运动仿真结果表明,潜器姿态角的调整会对拖曳点处的缆绳张力大小和变化趋势产生显著的影响,流在改变缆绳空间形状的同时引起了缆绳对潜器作用力和力矩的非线性和时变性,脐带缆总是阻止潜器自身动力对运动速度和姿态角的改变,且对纵荡运动的影响最大。  相似文献