水平轴潮流能水轮机数值模拟方法对比分析     

廖微  王兵振  张巍  段云琪 《海洋技术学报》2016,(1):113-117

叶素动量理论和CFD方法是水平轴潮流能水轮机性能分析中运用较为广泛的数值模拟方法,文中结合小尺寸水轮机模型试验,对比分析了叶素动量理论和CFD方法在水轮机性能分析中的准确性和适用性.验证结果表明:叶素动量理论和CFD方法均能对水轮机的性能进行预报,且CFD精度高于动量叶素理论;大尖速比时,动量叶素理论偏离较高,不再适合性能预报;在小尖速比下,建议采用RNGk-ε模型的CFD方法进行分析计算;动量叶素理论适合设计初期设计方案的对比分析,而CFD方法适合对设计结果的验证校核和详细分析.  相似文献   

考虑晃荡效应的独立B型LNG液舱结构多目标优化     

王元  王德禹 《海洋工程》2016,34(2):88-94

独立B型LNG液舱内部设置舱壁板材及多种桁材,有效缓解了液舱晃荡效应。针对晃荡载荷下的独立B型LNG液舱结构多目标优化,利用规范中的公式计算晃荡载荷,并引入液舱晃荡系数,以期综合反映液舱内部构件对晃荡特性的影响,在此基础上进一步建立以液舱结构重量和液舱晃荡系数为目标的多目标优化模型,采用多目标遗传算法(NCGA),计算得到改进的独立B型LNG液舱结构设计方案。  相似文献   

Time domain simulation of side-by-side floating bodies using a 3D numerical wave tank approach     

《Applied Ocean Research》2016

The coupled system of two side-by-side fixed and/or floating bodies interacting with a large amplitude nonlinear wave is studied using a direct time domain solution method. The numerical model is based on a three-dimensional mixed Eulerian–Lagrangian (MEL) method under certain simplifying approximations permitting Rankine panel scheme to be implemented over a time-invariant boundary surface to solve the boundary value problem for the unknown velocity potentials. A 4th order Adams–Bashforth–Moulton scheme is used for time marching of rigid-body motion histories of the individual bodies and evolution of the free-surface including the gap region in which large resonant fluid motions occur. A systematic study has been carried out to evaluate the performance of the developed time domain method in simulating the forces and motions as well as the fluid motion in the gap region for the two body system under various arrangements and in different wave-headings. At first, the computed numerical results have been validated and verified with computational and experimental results available in literature for standard geometries such as vertical truncated cylinders and rectangular boxes. Secondly, effectiveness of the damping lid model which is introduced to suppress wave resonance in the gap region is investigated including its influence on maximum sway forces on fixed and floating rectangular barges in side-by-side configurations. Thirdly, comparative studies on absolute and relative motion response for two cases (two rectangular barges, and a FLNG-FPSO + shuttle tanker) in side-by-side arrangement are detailed to bring out the importance of nonlinearities arising due to steep nonlinear incident waves. Finally, coupled motions of the two-body system of an FPSO and a shuttle tanker floating in side-by-side configuration in a steep nonlinear wave field are studied in which the two bodies are connected through hawsers, and also the FPSO is moored to the ground. Additionally there is a fender between the two bodies.  相似文献   

Lessons from the 2003 Tokachi-oki, Japan, earthquake for prediction of long-period strong ground motions and sloshing damage to oil storage tanks   总被引：1，自引：0，他引：1  

Ken Hatayama 《Journal of Seismology》2008,12(2):255-263

The 2003 Tokachi-oki earthquake (M _w 8.0) in northern Japan generated large-amplitude long-period (4–8 s) ground motions in the Yufutsu sedimentary basin, causing severe damage to seven large oil storage tanks with floating roof structures because of severe sloshing of oil. The 30,000–40,000-m³ tanks having suffered the severe damage such as fires and sinking of floating roofs experienced the sloshing with large amplitudes exceeding 3 m in which the fundamental mode was predominant. The second mode of sloshing was also excited in the 110,000-m³ tanks in which their floating roofs sank into oil, indicating that the higher modes of sloshing as well as the fundamental mode should be considered in damage prediction. The strong ground motion recordings demonstrated the earthquake dependency of predominant periods and the substantial spatial variation of the long-period shaking observed within the Yufutsu basin, meaning the necessity of source- and site-specific prediction of long-period strong ground motions. The two-dimensional numerical modeling suggested the importance of detailed structures of soft near-surface sediments as well as deep basin structure for accurate prediction of long-period strong ground motions in deep sedimentary basins.  相似文献   

水平井的水力特征及其解析解的适用条件   总被引：3，自引：0，他引：3  

万军伟  沈仲智  潘欢迎 《地球科学》2003,28(5):537-544

利用自制的水平井砂槽模型, 进行了一系列不同流量条件下的水平井抽水试验, 结果表明: (1)在不同出流条件下, 水平井井管中可以同时出现层流-粗糙紊流多种不同流态; (2) 水平井出流条件下, 井管中的水头损失既不能忽略, 也不服从线性变化规律.它与井管中的水流流态有关.用“等水头井壁”或“等强度线汇”来刻画水平井井壁边界条件是不全面的.根据“等强度线汇”理论得到的解析解与试验结果对比发现, 本试验条件下解析解的近似适用条件是: 水平井管中的水流全部为层流(Re < 2 320)或者层流和层流-光滑紊流过渡区(Re < 4 000)同时并存的情况.当水平井管中出现光滑紊流区(Re> 4 000), 即同时有层流、层流-光滑紊流过渡态和光滑紊流或更多种流态时, 解析解已不再适用, 此时必须用新的层流-管流耦合模型来求解.   相似文献   

西南峰丛山区分散供水模式及存在的问题   总被引：6，自引：2，他引：4  

邹胜章  陈宏峰  梁彬  裴建国  唐建生 《中国岩溶》2006,25(1):12-17

西南峰丛区居民主要采用溶井、水柜与水窖三种模式进行分散式供水,其水源分别来自地下河、岩溶泉及雨水。水柜供水适用于有使用价值的泉水出露的峰丛山区,溶井供水主要适用于有竖井的峰丛洼地底部及溶丘谷地边缘,水窖供水多用于地势较高、地表垂向岩溶极为发育、仅有雨水可供利用的峰丛山区。在大量调查与实际工程基础上,本文分别对三种供水模式的设计思路、设计参数与施工中的注意事项进行了详细论述,并给出了分散供水模式的设计示意图。分散供水目前存在的主要问题是选址布局不合理、设计与施工不科学以及水质安全得不到保障,对分散供水工程进行储水、供水与水处理一体化优化设计是保障水质安全的可靠手段。   相似文献   

直流电法超前探测沙槽模拟实验     

王夏杰  ;李杰  ;刘晓明  ;刘俊辰 《矿产与地质》2014,(2):249-252

直流电法超前探测是研究掘进工作面前方地层电性变化规律,预测掘进面前方含、导水构造的分布和发育情况的一种井下电法探测新技术。本次超前探测实验是通过在沙坑中埋设已知的低阻体,在模拟巷道中布置电极的方式,采用网络并行电法勘测系统将前方已知的物体探测出来。因为资料采集不受外界电流和其他环境的影响,探测结果较为理想,可以较为清楚的反应前方的异常体,验证其电法超前探测的可行性。  相似文献   

基于DEM和水箱理论识别流域河网方法研究   总被引：2，自引：1，他引：1  

乔飞  张万顺  崔鹏  冯桃辉  陈晓清 《测绘科学》2006,31(4):95-97

本文应用水箱原理处理流域DEM数据中存在的洼地问题,提出流域河网识别及编码的新方法。首先,确定洼地网格,搜索洼地区域,计算洼地容量,根据水箱原理确定洼地出口,判断洼地的流向;然后,逐层合并消减洼地,修正洼地水流方向;最后,计算网格集水面积,进行河网识别和编码。本文结合云南东川蒋家沟流域的DEM资料进行河网识别,得到了完整的流域河网,结果与实际勘测的河网完全吻合,这表明应用该方法提取流域河网是可行的,能够为进一步的分布式水文、泥石流、环境模型提供条件。  相似文献   

完全非线性深水波的数值模拟   总被引：2，自引：0，他引：2       下载免费PDF全文

周斌珍  宁德志  滕斌  宋伟华 《海洋学报》2011,33(1):27-35

基于势流理论,并结合深水波质点运动从水面向下呈e指数衰减的特性,建立了完全非线性数值变深水槽模型,通过实时模拟活塞式造波机运动来产生波浪.采用时域高阶边界元法进行模拟,利用混合欧拉-拉格朗日方法和四阶Runge-Kutta方法追踪流体瞬时水面,应用镜像格林函数消除了水槽两个侧面的积分,在水槽末端布置人工阻尼层来消除反射...  相似文献   

Numerical study of air chamber for oscillating water column wave energy convertor     

刘臻 《中国海洋工程》2011,25(1):169-178

Oscillating Water Column (OWC) wave energy converting system is one of the most widely used facilities all over the world.The air chamber is utilized to convert the wave energy into the pneumatic energy.The numerical wave tank based on the two-phase VOF model is established in the present study to investigate the operating performance of OWC air chamber.The RANS equations,standard k-ε turbulence model and dynamic mesh technology are employed in the numerical model.The effects of incident wave conditions and shape parameters on the wave energy converting efficiency are studied and the capability of the present numerical wave tank on the corresponding engineering application is validated.  相似文献