SMA复合摩擦阻尼器性能的试验研究   总被引：3，自引：0，他引：3  

薛素铎  石光磊  庄鹏 《地震工程与工程振动》2007,27(2):145-151

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。  相似文献   

工业废水和城市综合污水的环境风险管理   总被引：1，自引：0，他引：1       下载免费PDF全文

陈建  韩小波  丁登山  金洪钧 《水科学进展》2007,18(4):614-622

综述了国内外工业废水与城市综合废水的监控和环境风险管理进展。与发达国家比较,化学监测法是目前我国工业废水和城市综合污水监控的唯一手段,而且主要有赖于COD等极少参数,并不能有效监控复合有毒有机污染物的排放。采用生态毒性检测法,可弥补这一缺陷,满足环境风险管理要求。毒性鉴别评价鉴别出导致废水/污水生态毒性的关键有机毒物,是降低其环境风险的核心。还对生态毒性检测法应用于我国废水/污水排放的监控和环境风险管理前景做了评述。  相似文献   

低应变基桩动测资料反演问题多解性与人工拟合的初步探讨     

廖旭涛  刘东甲  刘煜洲 《物探化探计算技术》2007,29(3):218-222

在实际低应变基桩动测资料解释工作中常发生误判,其原因除测试人员素质的主观因素外,客观上存在反演问题多解性亦是重要原因之一。这里从正演理论计算与物理概念上阐明,在一定桩土系统的物性、几何参数与拟合精度条件下,反演问题多解性是客观存在的。并且进一步探讨了进行人工拟合时应遵守的规则,正确运用此规则能尽量避免误判的产生。在此规则指导下,对易发生误判的实测曲线进行人工拟合,进一步说明了反演多解性问题的客观存在。  相似文献   

Roughness control on hydraulic conductivity in fractured rocks   总被引：1，自引：0，他引：1  

Laura Scesi  Paola Gattinoni 《Hydrogeology Journal》2007,15(2):201-211

The influence of joint roughness on the typologies of fluid flow inside fractures is well known and, thanks to experiences in the field of hydraulics, it has been studied from both a physical and mathematical point of view. Nevertheless, the formulations adopted by traditional hydraulic models are hardly applicable in the geological field, because of the difficulty encountered in the roughness parameter estimation. Normally this parameter can be estimated using the joint roughness coefficient (JRC), which considers both the asperity height and its regularity and directional trend. The main advantage in using the JRC arises from the fact that it can easily be obtained from geological-technical surveys and from comparison with the standard Barton profiles. Some relationships have been built up that allow for the estimation of the hydraulic conductivity tensor (an essential parameter for understanding water flow in fractured rock masses), not only as a function of traditional parameters like aperture, spacing, dip and dip direction, etc., but also of joint roughness, precisely expressed in terms of the roughness coefficient. These relationships have been studied initially from a theoretical point of view and then practically, through laboratory investigations.

---

Resumen  Se conoce muy bien la influencia de la rugosidad de las grietas en las tipologías del flujo de fluidos a lo interior de las fracturas y gracias a las experiencias en el campo de hidráulica ha sido posible estudiarla desde puntos de vista matemáticos y físicos. Sin embargo, las formulaciones adoptadas por los modelos hidráulicos tradicionales tienen poca aplicabilidad en el campo geológico debido a la dificultad relacionada con la estimación del parámetro de rugosidad. Normalmente este parámetro puede estimarse usando el coeficiente de rugosidad de grieta (JRC) el cual considera tanto la altura de la aspereza como su regularidad y tendencia direccional. La principal ventaja de utilizar el JRC se deriva del hecho que puede obtenerse fácilmente de levantamientos técnico-geológicos y de la comparación con los perfiles Standard Barton. Se han construido algunas relaciones que permiten la estimación del tensor de conductividad hidráulica (un parámetro esencial para el entendimiento del flujo de agua en masas de roca fracturadas), no solo en función de parámetros tradicionales como apertura, espaciado, buzamiento y dirección de buzamiento, etc., sino también en función de la rugosidad de la grieta estimada con precisión en términos del coeficiente de rugosidad. Estas relaciones se han estudiado inicialmente desde un punto de vista teórico y luego de modo práctico a través de investigaciones de laboratorio.

---

Résumé  L’influence de la rugosité des joints sur les types d’écoulement de fluide dans les fractures est bien connue et a été étudiée aussi bien du point de vue physique que mathématique grace à des expériences menées dans le domaine de l’hydraulique. Cependant les formulations adoptées dans les modèles hydrauliques traditionnels sont difficilement applicables dans le domaine de la géologie à cause de la difficulté rencontrée pour estimer la rugosité. Ce paramètre peut normalement être apprécié grace au coefficient de rugosité du joint (JRC), lequel prend en compte à la fois la hauteur de l’aspérité ainsi que sa régularité et sa direction. Le principal avantage dans l’utilisation du JRC réside dans le fait qu’il peut facilement être obtenu à partir d’études techniques-géologiques et par comparaison avec la classification de Barton. Des relations qui permettent une estimation du tenseur de conductivité hydraulique (un paramètre essentiel pour comprendre l’écoulement de l’eau dans les masses rocheuses fracturées) ont été élaborées, pas seulement en fonction de paramètres traditionnels tels que l’ouverture, l’espacement, l’inclinaison et la direction d’inclinaison, etc , mais aussi en prenant en compte la rugosité des joints à travers le coefficient de rugosité. Ces relations ont initialement été étudiées d’un point de vue théorique puis expérimentalement à travers des recherches en laboratoire.

  相似文献   

云南天文台三孔较差视宁度监视仪的建立     

许骏 《天文研究与技术》1998,(1)

较详细地讲述了云南天文台三孔较差视宁度监视仪的情况,然而,与一般天文理论和天文技术的专题研究不一样,天文仪器的研制有如说是研究,还不如说是归纳;它不是分析一个具体的尚未解决的难题,而是把许多已知的理论和技术综合起来,构成一台具体的仪器。所以,本文把许多至少是表面上互不相关的理论和技术问题归纳到一篇论文中。仪器是有许多模块组成的,为了看起来逻辑性较强,我们将仪器分模块叙述,全文遵循如下顺序：１在第一篇中,回顾世界各天文台视宁度测量设备的发展史和云南天文台的宁静度测量发展史;２在第二篇中,介绍：１）云南天文台三孔较差视宁度研制任务的来源,仪器的整体状况;２）介绍云南天文台三孔较差视宁度仪的硬件系统;３）介绍云南天文台三孔较差视宁度仪的软件系统;若大模块中有多个小模块,在每一个大模块中,又遵循下述顺序：１）本模块的总体功能;２）构成该模块的基本技术;３）这些基本技术如何构成整体和完成预定功能。３在第三篇中,介绍我们所作的与视宁度测量有关的一些实验和实验结果。  相似文献   

发光细菌在渔业水域污染物急性毒性快速检测中的应用   总被引：1，自引：0，他引：1  

吴伟  胡庚东  火村英  奚新伟 《广东海洋大学学报》1998,(2)

以明亮发光杆菌为指示生物,对渔业水域中污染物的急性毒性进行了检测,同时研究了PH值、温度对试验结果的影响。研究表明,发光细菌毒性试验是一种快速、简便的毒性测试方法,在温度20～30℃,pH6.0～9.0条件下所进行的测试,其结果与鱼类毒性试验可以互相替代。  相似文献   

声频应力波在锚杆锚固状态检测中的应用   总被引：17，自引：0，他引：17  

汪明武 《地质与勘探》1998,34(4):54-56,59

研究了声频应力波法快速普查检测锚杆锚固状态的原理及评价分级标准,并将它成功地应用于潘一矿锚杆施工质量的检测,得出了利用声频应力波快速普查检测锚杆锚固质量的方法是切实可行和有效的。  相似文献   

Laboratory modelling of shear behaviour of soft joints under constant normal stiffness conditions   总被引：1，自引：0，他引：1  

B. Indraratna  A. Haque  N. Aziz 《Geotechnical and Geological Engineering》1998,16(1):17-44

Shear behaviour of regular sawtooth rock joints produced from casting plaster are investigated under constant normal stiffness (CNS) conditions. Test results obtained in this investigation are also compared with the constant normal load (CNL) tests. It is observed that the peak shear stress obtained under CNL conditions always underestimates the peak shear stress corresponding to the CNS condition. Plots of shear stress against normal stress show that a nonlinear (curved) strength envelope is acceptable for soft rock joints subjected to a CNS condition, in comparison with the linear or bilinear envelopes often proposed for a CNL condition. Models proposed by Patton (1966) and Barton (1973) have also been considered for the predictions of peak shear stress of soft joints under CNS conditions. Although Patton's model is appropriate for low asperity angles, it overestimates the shear strength in the low to medium normal stress range at higher asperity angles. In contrast, while Barton's model is realistic for the CNL condition, it seems to be inappropriate for modelling the shear behaviour of soft joints under CNS conditions. The effect of infill material on the shear behaviour of the model joints is also investigated, and it is found that a small thickness of bentonite infill reduces the peak stress significantly. The peak shear stress almost approached that of the shear strength of infill when the infill thickness to asperity height ratio (t/a) reached 1.40. This paper also introduces an original, empirical shear strength envelope to account for the change in normal stress and surface degradation during CNS shearing. © Rapid Science Ltd. 1998  相似文献   

Carbonatation processes at the El Berrocal natural analogue granitic system (Spain): inferences from mineralogical and stable isotope studies     

E. Reyes  L. Prez del Villar  A. Delgado  G. Cortecci  R. Núez  M. Pelayo  J. S. Czar 《Chemical Geology》1998,150(3-4):293-315

The El Berrocal granite/U-bearing quartz vein system has been studied as a natural analogue of a high-level radioactive waste repository. The main objective is to understand the geochemical behaviour of natural radionuclides occurring under natural conditions. In this framework, the carbonatation processes have been studied from a mineralogical and isotopic ( and ) point of view, since carbonate anions are powerful complexing agents for U(VI) under both low-temperature hydrothermal and environmental conditions. The carbonatation processes in the system are identified by the presence of secondary ankerite, with minor calcite, scattered in the hydrothermally altered granite, and Mn calcite in fracture filling materials. The isotopic signatures of these carbonates lead us to conclude that ankerite and calcite from the former were formed at the end of the same hydrothermal process that altered the granite, at a temperature range of between 72° and 61°C for ankerite, and between 52° and 35°C for calcite. The effect of edaphic CO₂ on both carbonates, greater on calcite than on ankerite, is demonstrated. Calcites from fracture fillings are, at least, binary mixtures, in different proportions, of hydrothermal calcite, formed between 25° and <100°C, and supergenic calcite, formed at ≤25°C. According to their signatures, the effect of edaphic CO₂ in both calcites is also evident. It is assumed that: (i) hydrothermal calcite from fracture fillings and ankerite from the hydrothermally altered granite are the result of the same hydrothermal process, their chemical differences being due to the intensity of the water/rock interaction which was stronger in the altered granite than in the fractures; and (ii) all of these carbonatation processes are responsible for ancient and recent migration/retention of uranium observed in the hydrothermally altered granite and fracture fillings.  相似文献   

应用光率体论述宝石折射率仪测试原理及其应用     

孙先如  蒋小平  雷能忠  杜建国 《安徽地质》1998,(3)

】应用晶体光学中的光率体原理对宝石折射仪测试应用问题作较为详尽的论述,特别对一轴晶、二轴晶宝石测试所遇到的各种现象作进一步全面探讨,并给予确切的解释。  相似文献