Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs     

Shen Yang  Xue Shen  Hanlong Liu  Huayang Ge  Xiaoxi Rui 《Marine Georesources & Geotechnology》2020,38(6):706-715

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.  相似文献   

Acoustic and stiffness properties of gillnets as they relate to small cetacean bycatch     

Mooney  T. Aran; Au  Whitlow W. L.; Nachtigall  Paul E.; Trippel  Edward A. 《ICES Journal of Marine Science》2007,64(7):1324-1332

  相似文献   

Advances in the fatigue assessment of wire ropes     

Alan G. Paton  Neil F. Casey  Joe Fairbairn  William M. Banks   《Ocean Engineering》2001,28(5)

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.  相似文献   

Strength Analysis of Turret Mooring Productive/Storage Tanker     

Zhang Shilian Jin Dexian Associate Professor 《中国海洋工程》1997,(3)

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.  相似文献   

Ultimate strength of ship hulls under torsion     

Jeom Kee Paik  Anil K. Thayamballi  P. Terndrup Pedersen  Young Il Park 《Ocean Engineering》2001,28(8):51

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.  相似文献   

A Preliminary Study of Shear Wave in Seafloor Surface Sediments   总被引：1，自引：0，他引：1  

Bo Lu  Ganxian Li  Shaojian Huang 《Marine Georesources & Geotechnology》2006,24(1):17-28

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.  相似文献   

Target-strength measurements of Pacific hake (Merluccius productus) in Canadian waters using quasi-ideal and conventional beam transducers     

Hamano  Akira; Sasakura  Toyoki; Kieser  Robert; Cooke  Ken; Kubota  Katsuhiko; Clay  Allen 《ICES Journal of Marine Science》1996,53(2):273-279

  相似文献   

0220号热带风暴(米克拉)特征分析     

李孟植 《海洋预报》2003,20(3):7-11

南海是热带气旋活动较为频繁的地区之一。该地区因其独特的地理环境和复杂的热带大气环流系统，在热带气旋预报工作上存在一定的困难。本文在分析一些气象图表资料的基础上，对2002年第20号热带风暴(米克拉)的形成、发展及消亡进行了探讨和研究。主要从形成的背景环流，气旋的结构等方面入手，总结出一些该气旋所具备韵特有流场，从而为以后的南海自生热带气旋预报工作积累一定经验。  相似文献   

海底浅层介质切变波的初步研究   总被引：2，自引：0，他引：2  

卢博  李赶先  黄韶健 《热带海洋学报》2004,23(4):11-18

初步分析了中国沿海海底浅层介质切变波的传播特性,讨论了多种海底浅层介质切变波与压缩波、物理力学性质之间的关系,并与Hamilton和Chen等人的结果进行了比较。认为海底浅层介质存在切变模量,切变波可以被测量出来,切变波速为50—600m·s-1,测量频率在50—200kHz之间,用波速比可以评价海底浅层介质的应力 应变性质。研究工作有助于描述和评价中国沿海海底浅层介质声学物理性状,并为最终建立中国沿海海底地声模型提供依据。  相似文献   

Swimming behaviour and target strength of isada krill (Euphausia pacifica)   总被引：1，自引：0，他引：1  

Miyashita  Kazushi; Aoki  Ichiro; Inagaki  Tadashi 《ICES Journal of Marine Science》1996,53(2):303-308

  相似文献