An experimental study on seismic responses of multifunctional vibration‐absorption reinforced concrete megaframe structures     

Zongjian Lan  Yuji Tian  Liang Fang  Shuting Liang  Xinde Wang 《地震工程与结构动力学》2004,33(1):1-14

Two models are tested on a shake‐table. One of the models is a normal reinforced concrete megaframe structure and the other is a multifunctional vibration‐absorption reinforced concrete megaframe structure in which the laminated rubber bearings are placed between the major frame and the minor frames. Two earthquake motions (the El Centro wave and the Taft wave) are used during the test. This paper presents the dynamic characteristic, the seismic responses and the failure mechanism of these two models under varying peak acceleration levels for each of the earthquake motions. The test results demonstrate that the aseismic behavior of a multifunctional vibration‐absorption reinforced concrete megaframe structure is much better than that of a normal reinforced concrete megaframe structure. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Dynamic performance of twin curved cable‐stayed bridges     

C. Gentile  F. Martinez y Cabrera 《地震工程与结构动力学》2004,33(1):15-34

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Period formulas of shear wall buildings with flexible bases     

Faouzi Ghrib  Haji Mamedov 《地震工程与结构动力学》2004,33(3):295-314

The evaluation of the fundamental period of shear wall buildings considering the flexibility of the base is investigated in this paper. This research is motivated by the discrepancy reported between the formulas used in different building codes and the measurement of real buildings. Both experimental and analytical approaches are used to assess the effect of the base flexibility on the fundamental period of shear wall structures. In total, twenty buildings built on different types of soil are tested under ambient vibration. The fundamental period is identified using a non‐parametric linear model in the frequency domain. The results show that fundamental period formulas used by UBC‐97 and NBCC‐95 are inadequate since they do not include the effect of the foundation stiffness. To improve the estimation of the fundamental period of shear wall buildings, an analytical approach is presented. The structure and the foundation are represented by a continuous‐discrete system. The stiffnesses of the base are represented by translational and rotational discrete springs. The rigidities of these springs are evaluated from the elastic uniform compression of the soil mass and the size of the foundation. The analytical predictions improve the estimation of the fundamental period and keep the computation simple. The error between the measured period and the analytical results is, on average, less than 10%. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

The Rotational Structure along the Eastern Segment of the Altyn Tagh Fault and Its Implications in Dynamics     

Wang Ping 《中国地震研究》2004,18(4):327-336

As a result of the left-lateral strike-slipping of the Altyn Tagh fault in Neotectonic period, a contra-rotational structure, namely the Zhaobishan vortex structure, has developed at the juncture of the main Altyn Tagh fault and the northern fringe fault of the Qilian Mountains.Preliminary analysis on the deformation and evolution of the Zhaobishan vortex structure. In combination with the previous data, suggests that the tectonic transform between the Altyn Tagh fault and the northern fringe fault of the Qilian Mountains attributes to the deformation of the rotational structure. The existence of a series of rotational structures along the Altyn Tagh fault and on the northeastern edge of the Qinghai-Xizang(Tibet) plateau indicate that as the substance in the northern Qinghal-Xizang (Tibet) plateau moves clockwise around the eastern tectonic knot of the Himalayas, rotational structures become the principal mode on the northern marginal zone of the Plateau of transforming and absorbing tectonic deformation.  相似文献   

一次强风暴的垂直环境特征数值模拟分析   总被引：4，自引：2，他引：4  

陈力强  周小珊  杨森 《气象》2004,30(9):3-8

应用MM 5模式对东北冷涡诱发的 2 0 0 2年 7月 1 2日强风暴进行了数值模拟 ,较成功地模拟出中尺度强对流风暴。发现冷涡后部中层干冷空气绝热下沉是东北冷涡 70 0hPa附近干暖盖形成和维持的重要机制 ,而低层暖湿气流爬升及干暖盖的抑制作用是东北冷涡强对流不稳定能量积累的重要机制。风暴发生前持续的低层西南风到中层西北风的风垂直切变产生的差动平流 ,加剧了层结不稳定 ,而风暴临近风垂直切变方向的快速逆转使热成风不平衡 ,必须通过激发垂直环流以适应其变化 ,对风暴发展有重要作用。  相似文献   

2002年6月13日重庆区域大暴雨分析   总被引：4，自引：1，他引：4  

王中  周毅 《气象》2004,30(5):30-32

通过对重庆西部“6 1 3”区域大暴雨的分析 ,发现此次天气过程是一次典型的高原涡与西南涡耦合 ,结合地面弱冷空气条件下产生的 ,同时对ECMWF和T2 1 3数值预报产品进行了简要的分析 ,发现ECMWF和T2 1 3的形势预报能力都比较好 ,但T2 1 3的部分物理量要素和降水量预报能力还有待提高。  相似文献   

打入桩的非线性侧向振动     

王怀忠  汤朝阳 《岩土力学》2004,25(Z2):393-396

针对工程实践中出现的问题,将打入桩的自由段简化为入土端嵌固、锤击端简支的压杆模型,建立桩的振动微分方程,研究锤击轴向力对桩振动频率的影响,并对比锤击初阶频率与桩振动基频的关系得出锤击作用引起柔性桩共振的规律,提出了避开共振影响范围,解决现场工程问题的方法.  相似文献   

Analysis of Blast Vibration Characteristics Across a Trench and a Pre-Split Plane   总被引：3，自引：0，他引：3  

A. J. Prakash  P. Palroy  D. D. Misra 《Fragblast: International Journal for Blasting and Fragmentation》2004,8(1):51-60

This paper presents the influence of various discontinuities, natural or artificial, on magnitude and frequencies of blast induced ground vibrations. These discontinuities were geological faults, a pond, a shaft incline, a trench and a pre-split plane interposed in the path of vibration propagation. In the post-trench region, ground vibrations in terms of peak particle velocity were significantly reduced and dominant frequencies in higher bands were consequently observed. Depth of trench with respect to blastholes were varied and consequent vibration characteristics were analyzed. The techniques of creating a trench and pre-split plane were successfully implemented in controlling vibration and in increasing the explosives charge to meet the scheduled production target of an opencast mine. Comparisons of ground vibration characteristics affected by a trench and a pre-split plane of the same depth are described in the text. The findings lead to the conclusion that such experimental data are necessary for production blasting in open cast mines under constrained conditions.  相似文献   

Simulation of seismic response in a city-like environment   总被引：1，自引：0，他引：1  

Jean-Philippe Groby  Chrysoula Tsogka  Armand Wirgin   《Soil Dynamics and Earthquake Engineering》2005,25(7-10):487-504

We study the seismic response of idealized 2D cities, constituted by non-equally spaced, non-equally sized homogenized blocks anchored in a soft layer overlying a hard half space. The blocks and soft layer are occupied by dissipative media. To simulate such response, we use an approximation of the viscoelastic modulus by a low-order rational function of frequency and incorporate this approximation into a first-order-in-time scheme. Our results display spatially variable, strong, long-duration responses inside the blocks and on the ground, which qualitatively match the responses observed in some earthquake-prone cities of Mexico, France, the USA, etc.  相似文献   

Influence of transducer-ground coupling on vibration measurements   总被引：1，自引：0，他引：1  

G. R. Adhikari  A. I. Theresraj  R. N. Gupta 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(2):79-92

Various methods of transducer mounting provide varying degrees of coupling between the transducer and the measurement surface. The influence of four of these methods on vibration measurements was studied. For this purpose, the first transducer was placed freely on a horizontal surface, the second one was 'sandbagged', the third one was 'spiked' and the fourth one was completely buried in soil. These transducers were mounted side by side and ground vibrations were monitored for 14 blasts at an opencast coal mine.

Ground vibrations in terms of peak particle velocity, peak vector sum and frequency with different mounting methods were analysed. Assuming the data of the buried transducer as the most acceptable one, relative values of other transducers were determined and plotted. For the given tolerance for instrumental and human errors, anomalous readings were found in some cases. The waveforms of the buried transducer were then compared with those of others. Clear distortion in the waveforms or a very low correlation coefficient between two waveforms was suspected poor coupling.

The results indicate that decoupling is most likely with the surface transducer. However, the sandbagged and spiked transducers are also prone to decoupling. Decoupling can result in higher or lower ground vibration. Therefore, burial should be the preferred method for mounting of transducers in soil.  相似文献