Study on scattering wave force of horizontal and vertical plate type breakwaters   总被引：1，自引：0，他引：1  

王科  张犀  高鑫 《中国海洋工程》2011,25(4):699-708

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method,and the relations of wave exciting force with plate thickness,submergence and length are obtained.It is found that:1) The efficient wave exciting force exists while plate submergence is less than 0.5 m,and the plate is very thin with order O(0.005 m).2) The maximum heave wave exciting force exists,and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored.3) The maximum sway wave exciting force exists,it is the main factor for surface or submerged vertical plate,and the roll force is about 20 times of horizontal plate.  相似文献   

Experimental researches on reflective and transmitting performances of quarter circular breakwater under regular and irregular waves   总被引：1，自引：1，他引：0  

史艳娇  吴米玲  蒋学炼  李炎保 《中国海洋工程》2011,25(3):469-478

A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB). Based on regular wave tests, the reflection and transmission characteristics of QCB are analyzed and a few influencing factors are investigated. Then, the wave energy dissipation as wave passing over the breakwater is discussed based on the hydraulic coefficients of QCB and SCB. In irregular wave experiments, the reflection coefficients of QCB and their spectrums are studied. Finally, the comparisons between the experimental results and numerical simulations for QCB under regular and irregular wave conditions are presented.  相似文献   

Otway Continental Margin Transect: Crustal architecture from wide‐angle seismic profiling across Australia's southern margin     

D. M. Finlayson  I. Lukaszyk  C. D. N. Collins  E. C. Chudyk 《Australian Journal of Earth Sciences》2013,60(5):717-732

The Otway Basin in southeastern Australia formed on a triangular‐shaped area of extended continental lithosphere during two extensional episodes in Cretaceous to Miocene times. The extent of the offshore continental margin is highlighted by Seasat/Geosat satellite altimeter data. The crustal architecture and structural features across this southeast Australian margin have been interpreted from offshore‐onshore wide‐angle seismic profiling data along the Otway Continental Margin Transect extending from the onshore Lake Condah High, through the town of Portland, to the deep Southern Ocean. Along the Otway Continental Margin Transect, the onshore half‐graben geometry of Early Cretaceous deposition gives way offshore to a 5 km‐thick slope basin (P‐wave velocity 2.2–4.6 km/s) to at least 60 km from the shoreline. At 120 km from the nearest shore in a water depth of 4220 m, sonobuoy data indicate a 4–5 km sedimentary sequence overlying a 7 km thick basement above the Moho at 15 km depth. Major fault zones affect the thickness of basin sequences in the onshore area (Tartwaup Fault Zone and its southeast continuation) and at the seaward edge of the Mussel Platform (Mussel Fault). Upper crustal basement is interpreted to be attenuated and thinned Palaeozoic rocks of the Delamerian and Lachlan Orogens (intruded with Jurassic volcanics) that thin from 16 km onshore to about 3.5 km at 120 km from the nearest shore. Basement rocks comprise a 3 km section with velocity 5.5–5.7 km/s overlying a deeper basement unit with velocity 6.15–6.35 km/s. The Moho shallows from a depth of 30 km onshore to 15 km depth at 120 km from the nearest shore, and then to about 12 km in the deep ocean at the limits of the transect (water depth 5200 m). The continent‐ocean boundary is interpreted to be at a prominent topographic inflection point 170 km from shore at the bottom of the continental slope in 4800 m of water. P‐wave velocities in the lower crust are 6.4–6.8 km/s, overlying a thin transition zone to an upper mantle velocity of 8.05 km/s beneath the Moho. Outstandingly clear Moho reflections seen in deep‐marine profiling data at about 10.3 s two‐way time under the slope basin and continent‐ocean boundary place further strong controls on crustal thickness. There is no evidence of massive high velocity (>7 km/s) intrusives/underplate material in the lower crust nor any synrift or early post‐rift subaerial volcanics, indicating that the Otway continental margin can be considered a non‐volcanic margin, similar in many respects to some parts of the Atlantic Ocean margins e.g. the Nova Scotia ‐ Newfoundland margin off Canada and the Galicia Bank off the Iberian Peninsula. Using this analogue, the prominent gravity feature trending northwest‐southeast at the continent‐ocean boundary may indicate the presence of highly serpentinised mantle material beneath a thin crust, but this has yet to be tested by detailed work.  相似文献   

Berm formation and dynamics on a gently sloping beach; the effect of water level and swash overtopping     

Stine G. Jensen  Troels Aagaard  Tom E. Baldock  Aart Kroon  Michael Hughes 《地球表面变化过程与地形》2009,34(11):1533-1546

Berm formation and morphological development of the beach face have been observed during a neap–neap tidal cycle on the gently sloping and accreting beach at Vejers, Denmark. During the field campaign, an intertidal bar migrated onshore and stabilized as a berm on the foreshore. A new intertidal bar occurred on the lower beach face, migrated onshore on the rising tide and finally merged with the pre‐existing berm. As the tide continued to rise, the new berm translated further onshore as an intertidal bar to the uppermost part of the foreshore. The sediment transport during the berm transition was onshore directed in the upper swash and offshore directed in the lower swash. This berm development can be described through both the neap‐berm, ridge‐and‐runnel and berm‐ridge development concepts proposed by Hine (Sedimentology 1979; 26: 333–351), and all three stages were observed during only three tidal cycles. The main factors controlling this fast transformation were the gentle slope of the cross‐shore profile, rapid water level translation rates, substantial swash overtopping of the berm, and low infiltration rates. Despite the onshore migration of intertidal bars and berm formation, no net foreshore accretion took place during the field campaign. This was largely due to the formation of rip channels with strong rip currents cutting through the intertidal bars and the berm, which acted as a sediment drain in the profile. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Complex multiple cosmogenic nuclide concentration and histories in the arid Rio Lluta catchment,northern Chile     

F. Kober  S. Ivy‐Ochs  G. Zeilinger  F. Schlunegger  P. W. Kubik  H. Baur  R. Wieler 《地球表面变化过程与地形》2009,34(3):398-412

Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of ¹⁰Be, ²¹Ne and ²⁶Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr^–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr^–1), established with the noble gas ²¹Ne, is in accordance with palaeodenudation rates derived from ²¹Ne/¹⁰Be and ²⁶Al/¹⁰Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide ²¹Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single ²¹Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

The stochastic estimation of satellite clock correction information in WADGPS     

Hüseyin Baki lz 《地球空间信息科学学报》2000,3(1):66-69

1 IntroductionChnventional DGPS is limited by the range overwhich the differential corrections are valid due tothe rapid decorrelation of the error sources with in-creasing distance from the reference station to user.In wide area differential GPS (WWPS) errorsources in GPS measurements are medeled sepa-rately,on the basis of a limited number of referencestaitOns, to overcome this drawback. The main er-ror sources are regarded as broadcast ephemeris er-ror,atmospheric refraction and satel…  相似文献   

组合码和相位观测值在线解双差模糊度的算法   总被引：4，自引：0，他引：4  

龚涛 《测绘学院学报》2000,17(2):86-90

如何在线精确地求解整周模糊度,是ＧＰＳ高精度动态相对定位的关键问题。在线解算取决于很多因素：基线长度、数据处理方法、接收机的性能（如双频还是单频）以及抗ＡＳ和ＳＡ的能力等。现代双频ＧＰＳ接收机能获得载波相位和Ｌ１、Ｌ２频道上的精度伪距观测值,组合这４个观测值可进行单历元整周模糊度解算。文中对组合码和相位观测值在线解整周度的算法进行了试验和分析,得出了很有实用意义的结合。  相似文献   

半圆型结构冰压力的物理模拟试验研究   总被引：4，自引：0，他引：4  

李志军  王永学  曲月霞  李广伟  李春花  王喜文 《冰川冻土》2003,25(4):445-452

利用DUT-1非冻结合成模型冰开展1:25冰对半圆型构件的物理模拟试验研究. 首先用简单的斜面构件的物理模拟试验检验了整体试验装置和技术设备的可靠性, 然后以同样比尺进行2种冰厚在5个不同水位条件的系列试验, 获得了模型冰排在半圆型构件前的破碎堆积现象和作用于构件上的水平和垂直作用力过程.结合实测模型冰物理和力学指标, 通过优化组合, 拟合出半圆型防波堤冰荷载的试验公式. 这些公式包含了冰对半圆型结构的弯曲破坏作用力、挤压破坏作用力及爬坡和堆积作用力.  相似文献   

小波变换在地震宽角反折射资料处理中的应用   总被引：8，自引：1，他引：7  

赵俊猛  汤吉  张海江  张成科  杨健  嘉世旭  张建狮  杨桌欣 《地球物理学报》2000,43(5):666-676

小波分析方法用于地震宽角反折射资料处理 ,它可将地震信号的分辨率由传统的1 /2- 1 /4λ（波长 ）提高到优于 1 /6λ .利用小波分析方法对沙雅-布尔津地震宽角反折射剖面资料进行处理 ,发现天山造山带的壳幔过渡带由 7- 8个高低速相间的薄层构成 ,平均速度较低 ,总厚度约 2 0km .而塔里木盆地北缘与准噶尔盆地的壳幔过渡带不具有这一特点 ,壳幔间主要以一级间断面实现过渡 .天山造山带与准噶尔盆地壳幔过渡带详细结构及其二者之间的差异特征为天山造山带地球动力学“层间插入消减模型”的建立提供了重要依据  相似文献   

防波堤损坏特点与其成因的关系   总被引：7，自引：2，他引：5  

李炎保  蒋学炼  刘任 《海洋工程》2006,24(2):130-138

利用日本《被灾防波堤集览》、葡萄牙锡尼斯防波堤、日本六小河原港防波堤、中国大连渔港、台湾基隆港等61件典型损坏案例及其它参考文献所涉及的140余件案例,讨论了防波堤损坏平面形态与断面部位的特征。根据防波堤损坏特点,从波浪水动力学特性、结构、地基和施工多方面分析了损坏原因与损坏特性之间的关系,从而深化对防波堤工作机理的认识。  相似文献