微地震监测技术在秦家屯地区的应用     

梁生  韩立国  李安帮 《吉林大学学报(地球科学版)》2007,(Z1)

详细阐述了微地震注水前缘监测的原理。应用微地震注水前缘监测系统,通过微地震信息的现场监测和解释,结合生产动态及其他监测资料综合分析,并以秦家屯地区的QK 3-5井为例,描述了秦家屯地区注水开发状态下水井水驱前缘位置,研究了地下油水运动规律,证明了方法的可靠性和实用性。结果表明,对于油田注水分析与研究微地震监测技术可以取得很好的效果。  相似文献   

利用水源热泵开采浅层地热能若干问题的探讨   总被引：5，自引：0，他引：5  

李宇  张远东  魏加华 《城市地质》2007,2(3):11-16

地下水源热泵采能技术作为一种浅层低温地热能的可持续开发方式,在我国推广应用已有近十年的时间。尽管推广时间不长,但发展速度非常之快,尤其是近3～5年。由于多方面的原因,我国部分地下水源热泵采能工程逐渐暴露出一些问题,需要给予足够的重视。本文介绍了地下水源热泵采能系统的运行模式及特点,简要地对国内外热泵采能技术的应用现状进行了综述,并对该项技术在我国推广应用过程中存在的一些问题,进行了一定的分析和讨论。  相似文献   

Development dynamics of intense solar proton flares     

A. B. Struminsky  I. V. Zimovets 《Astronomy Letters》2007,33(9):615-621

We consider the relationship of electromagnetic radiation in the three most intense flares of solar cycle 23, more specifically, those of October 28, 2003, January 20, 2005, and September 7, 2005, to the acceleration and release of protons into interplanetary space. The impulsive phase of these flares lasted ～ 20 min and consisted of at least three energy release episodes, which differed by their manifestation in the soft (1–8 Å, GOES) and hard (>150 keV, INTEGRAL) X-ray ranges as well as at radio frequencies of 245 MHz and 8.8 GHz. The protons and electrons were accelerated in each episode, but with a different efficiency; the relativistic protons were accelerated only after 5–6min of impulsive-phase development after the onset of a coronal mass ejection. It is at this time that maximum hard X-ray fluxes were observed in the September 7, 2005 event, which exceeded severalfold those for the other two flares considered. We associate the record fluxes of protons with energies > 200MeV observed in the heliosphere in the September 7, 2005 event with the dynamics of the impulsive phase. The extreme intensities of the microwave emission in the October 28, 2003 and January 20, 2005 events were probably attributable to the high-energy electron trapping conditions and did not reflect the acceleration process.  相似文献   

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks     

《Marine and Petroleum Geology》2015

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.  相似文献   

青岛海韵国际大厦第四系大口径水源热泵水井设计与施工          下载免费PDF全文

马连成  宋仕冰  刘世安 《探矿工程》2010,37(10):40-43

水源热泵技术作为供热供冷的重要方法之一,其水井工程的参数需根据具体的水文条件、气候条件、气象条件和地质地层等进行设计。在对第四系大口径水源热泵水井工程设计技术参数、施工工艺流程、成井质量控制、抽水与注水、渗水试验综合成果进行分析的基础上,采用水源热泵供热供冷中央空调技术设计的第四系土层大口径水源热泵水井,作为供冷供热水源达到了各项技术指标,取得了较好的成效,可供类似工程参考。  相似文献   

广西气候对注射模型的影响及维护措施     

陈细瑜  张丽君  刘霞 《气象研究与应用》2014,(2):66-68

探讨广西不同气候条件下保养教学用注射模型的有效措施.方法：选取320具注射模型作为研究对象,将注射模型按随机编号抽签法分为4份,每份80具模型.分别于2013年春夏秋冬四个季节进行研究,每个季节的80具模型随机分成实验组和对照组各40具.对照组按照模型生产厂家的产品使用、保养要求进行保养,实验组针对广西四季的气候条件采用不同的维护方法进行维护.结果：针对广西气候条件采用不同的维护方法,模型发霉率明显低于传统的保养方法（P＜0.05）.结论：根据广西不同的气候条件对教学用注射模型采用不同的维护方法,对防止模型霉变、延长使用寿命具有重要意义.  相似文献   

iCAP 6300电感耦合等离子体发射光谱仪的常规维护方法   总被引：1，自引：1，他引：0  

赵庆令  李清彩 《岩矿测试》2014,33(5):767-772

电感耦合等离子体发射光谱仪在使用过程中,由于控制气体流量的电磁阀出现机械性移位,致使工作气流量过于偏大或偏小,对进样系统及分析数据产生不利影响;长期频繁使用条件下,由于控制光学系统的机械定位装置的磨损,致使谱峰坐标偏离而影响仪器灵敏度;很长时间不能"引燃"等离子体,检查进样系统和氩气纯度并没有发现异常,需要验证RF发生器有无功率输出时有一定的困难;在等离子体工作时产生的高温尾气的长期作用下,难免造成点火头末端铜丝的锈蚀,致使点火头放电微弱,不能"引燃"等离子体。因此,为保证仪器的正常运行,提高工作效率,确保检测数据的准确度,实验室应建立健全电感耦合等离子体发射光谱仪维护保养方案,解决上述问题。本文结合实际工作经验,以iCAP 6300电感耦合等离子体发射光谱仪为例,提出可以借助"Manufacturing and Service.exe"程序校正工作气流量,验证RF发生器是否输出功率;利用C 193.091 nm谱线为基准校正谱线修正CID检测器的谱峰坐标系统;另外,对点火头、分析软件数据库及主机灰尘的清理也进行了详细的维护说明,这些措施有益于保障仪器的性能及提高设备的利用率。  相似文献   

Mathematical and numerical filtration–advection–dispersion model of miscible grout propagation in saturated porous media     

F. Bouchelaghem  L. Vulliet 《国际地质力学数值与分析法杂志》2001,25(12):1195-1227

The development of a predictive model of behaviour of porous media during injection of miscible grout, taking into account convection, dilution and filtration of grout solution with interstitial water, as well as consolidation aspects, is presented. Model assumptions are reviewed and discussed first. During the establishment of the model, we insist on surface terms and their physical relevance in expressing adsorption effects. Constitutive laws such as Fick's law for diffusive mass transport, hydrodynamic dispersion tensor dealing with miscibility, are modified by taking into account filtration effects. A new surface term appears in mass balance equations as a consequence of filtration. According to the filtration laws used, an initial filtration rate is estimated on the basis of a one‐dimensional experimental campaign. The field equations are discretized by using Galerkin finite element and θ‐scheme standard method. For transport equation, Streamline Upwind Petrov Galerkin method is employed to prevent numerical oscillations. Lastly, confrontation of numerical results with laboratory experiments constitutes a first step to validate the model on a realistic basis. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Contact Partial Melting of Granitic Country Rock, Melt Segregation, and Re-injection as Dikes into Ferrar Dolerite Sills, McMurdo Dry Valleys, Antarctica     

Hersum  Taber G.; Marsh  Bruce D.; Simon  Adam C. 《Journal of Petrology》2007,48(11):2125-2148

Numerous, interconnected, granitic dikes (<30 cm in widthand hundeds of meters in length) cut Ferrar dolerite sills ofthe McMurdo Dry Valleys, Antarctica. The source of the graniticdikes is partial melting of granitic country rock, which tookplace in the crust at a depth of about 2–3 km adjacentto contacts with dolerite sills. Sustained flow of doleriticmagma through the sill generated a partial melting front thatpropagated into the granitic country rock. Granitic partialmelts segregated and collected at the contact in a melt-rich,nearly crystal-free reservoir adjacent to the initial doleritechilled margin. This dolerite chilled margin was subsequentlyfractured open in the fashion of a trapdoor by the graniticmelt, evacuating the reservoir to form an extensive complexof granitic dikes within the dolerite sills. At the time ofdike injection the dolerite was nearly solidified. Unusuallycomplete exposures allow the full physical and chemical processesof partial melting, segregation, and dike formation to be examinedin great detail. The compositions of the granitic dikes andthe textures of partially melted granitic wall rock suggestthat partial melting was characterized by disequilibrium mineraldissolution of dominantly quartz and alkali feldspar ratherthan by equilibrium melting. It is also unlikely that meltingoccurred under water-saturated conditions. The protolith granitecontains only 7 vol.% biotite and estimated contact temperaturesof 900–950°C suggest that melting was possible ina dry system. Granite partial melting, under closed conditions,extended tens of meters away from the dolerite sill, yet meltsegregation occurred only over less than one-half a meter fromthe dolerite chilled margin where the degree of partial meltingwas of the order of 50 vol.%. This segregation distance is consistentwith calculated length scales expected in a compaction-drivenprocess. We suggest that the driving force for compaction wasdifferential stress generated by a combination of volume expansionas a result of granite partial melting, contraction during doleritesolidification, and relaxation of the overpressure driving doleriteemplacement. On a purely chemical basis, the extent of meltsegregation necessary under fractional and batch melting tomatch the Rb concentrations between melt and parent rock isa maximum of 48 and 83 vol.% melt, respectively. KEY WORDS: Antarctica; dike injection; disequilibrium; granite partial melting; silicic melt segregation  相似文献   

超长定向钻注装备关键技术分析及发展趋势     

李术才  李利平  孙子正  刘知辉  李梦天  潘东东  屠文锋 《岩土力学》2023,44(1):1-30

定向钻技术起源于石油钻井工业,经多年发展已拓展至隧道工程地质勘察及灾害处置、煤矿底板含水层改造、蓄能电站抽水通道施工、市政管道铺设等多个领域。地面注浆技术结合定向钻长距离精准穿越的优势,可实现地下工程不良地质高效预加固与灾害安全处置,具有广阔的应用前景。系统综述了定向钻注装备技术的发展历程、研究现状和待突破关键技术。首先,介绍了定向钻与地面注浆技术的发展历程;其次从重大科研项目、学术论文、授权专利以及工程实践等方面进行了分析与总结。结果表明：我国现阶段定向钻注技术总体已达到自主化、实用化的国际先进水平,但在千米级长距离快速钻进、复杂地质条件精准导向、地下工程精准注浆处置等核心技术方面仍存在“卡脖子”难题。面向战略性重大工程建设需求,提出了超长距离定向钻注一体化装备“预报、钻进、注浆、检测”四大功能模块,围绕随钻感知预报、快速钻进与卡钻预测、精准导向技术、远距离凝胶可控注浆材料、稳压控制分段注浆工艺、随钻检测系统六方面,开展了分析与讨论,可为我国定向钻注一体化装备技术发展和地下工程灾害防控提供参考。  相似文献