参数化的多次散射雷达方程和它的反演理论 Ⅱ:反演理论     

邱金桓  吕达仁 《大气科学》1992,(6)

本文根据参数化的多次散射雷达方程,分析了激光多次散射对激光回波信号和一次散射雷达方程反演结果的效应,提出了迭代前向积分法和迭代后向积分法以求解参数化的多次散射雷达方程,并根据多次散射信号对云和气溶胶的前向散射相函数的高度敏感性提出了一个从双接收视场的多次散射激光回波信号,同时确定云和气溶胶消光系数分布和前向散射相函数的方法.此外,本文还根据数值试验分析了这些反演方法在地基激光雷达和空间站激光雷达两种情形下的适用性.  相似文献   

On the Parameterisation of the Effective Roughness Length for Momentum Transfer over Heterogeneous Terrain   总被引：2，自引：2，他引：0  

K. Goode  S. E. Belcher 《Boundary-Layer Meteorology》1999,93(1):133-154

We develop a parameterisation for the effective roughness length of terrain that consists of a repeating sequence of patches, in which each patch is composed of strips of two roughness types. A numerical model with second-order closure in the turbulent stress is developed and used to show that: (i) the normalised Reynolds stress develops as a self-similar profile; (ii) the mixing-length parameterisation is a good first-order approximation to the Reynolds stress. These findings are used to characterise the blending layer, where the stress adjusts smoothly from its local surface value to its effective value aloft. Previous studies have assumed that this adjustment occurs abruptly at a single level, often called the blending height. The blending layer is shown to be characterised by height scales that arise naturally in linear models of surface layer flow over roughness changes, and calculations with the numerical model show that these height scales remain appropriate in the nonlinear regime. This concept of the blending layer allows the development of a new parameterisation of the effective roughness length, which gives values for the effective roughness length that are shown to compare well with both atmospheric measurements and values determined from the second-order model.  相似文献   

A theoretical investigation of bed-form shapes     

Richard?StylesEmail author  Scott M.?Glenn 《Ocean Dynamics》2003,53(3):278-287

The deformation of movable boundaries under the action of an applied turbulent shear stress is well known. The resulting bed forms often are highly organized and nearly two-dimensional, which makes them an intriguing focus of study considering that they are generated in both steady and oscillatory turbulent flows. Many past studies share a common approach in which an infinitesimal perturbation is prescribed and the resulting growth or decay patterns are examined. In this approach, the bed forms are usually sinusoidal and the perturbation analysis does not provide a theoretical prediction of equilibrium bed-form geometry. An alternative approach is suggested here in which the forcing terms (pressure and stress) are prescribed parametrically and the governing equations are solved for the flow velocity and the associated boundary deformation. Using a multilayered approach, in which the bottom boundary layer is divided into a discrete, yet, arbitrary number of finite layers, analytical solutions for the horizontal current and bed profile are derived. The derivations identify two nondimensional parameters, p₀/u₀² and ₀/kh₀u₀², which modulate the amplitude of the velocity fluctuations and boundary deformation. For the case of combined pressure and stress divergence anomalies, the magnitude of the front face and lee slopes exhibit an asymmetry that is consistent with observed bed forms in steady two-dimensional flows.Responsible Editor: Jens Kappenberg  相似文献   

基于边界积分方程的"准三极"法电阻率层析成像     

毛先进  鲍光淑 《地球物理学进展》2000,15(2):40-46

基于边界积分方程,提出了依据二极采样数据、但利用电位差的某种线性组合的"准三极"电阻率层析成像方法.研究表明,该方法不仅较好地解决了对高阻异常体的成像问题,而且使低阻异常体的成像质量获得了明显改善和提高,因此增强了电阻率层析成像技术的实用性.  相似文献   

A new scheme for numerical modelling of flow and transport processes in 3D fractured porous media     

Andrés Peratta  Viktor Popov 《Advances in water resources》2006

The objective of this work is to develop a new numerical approach for the three-dimensional modelling of flow and transient solute transport in fractured porous media which would provide an accurate and efficient treatment of 3D complex geometries and inhomogeneities. For this reason, and in order to eliminate as much as possible the number of degrees of freedom, the fracture network, fractures and their intersections, are solved with a coupled 2D–1D model while the porous matrix is solved independently with a 3D model. The interaction between both models is accounted for by a coupling iterative technique. In this way it is possible to improve efficiency and reduce CPU usage by avoiding 3D mesh refinements of the fractures. The approach is based on the discrete-fracture model in which the exact geometry and location of each fracture in the network must be provided as an input. The formulation is based on a multidimensional coupling of the boundary element method-multidomain (BEM-MD) scheme for the flow and boundary element dual reciprocity method-multidomain (BE-DRM-MD) scheme for the transport. Accurate results and high efficiency have been obtained and are reported in this paper.  相似文献   

Moving boundaries in transboundary air pollution co-production of science and policy under the convention on long range transboundary air pollution     

Willemijn Tuinstra  Leen Hordijk  Carolien Kroeze 《Global Environmental Change》2006,16(4):349-363

This article focuses on the science–policy interaction in international negotiations in the context of the United Nations Economic Commission for Europe's Convention for Long Range Transboundary Air Pollution (CLRTAP). It addresses the question how participants in the assessment process divide and co-ordinate work between science and policy and how this enhances credibility, legitimacy and relevance with multiple audiences. For this purpose the article combines an analytical framework to approach effectiveness of scientific assessment in policy making, with the notion of boundary work and co-production of science and policy. The article argues that knowledge produced within the CLRTAP process and the institutional setting in which this knowledge production takes place cannot be separated from each other. Furthermore credibility, legitimacy and relevance are to a large extent determined by boundary work in an early stage of the process. At the same time boundary work has to take place continuously in order keep the assessment process credible, legitimate and relevant for new audiences. The application of a combined framework for analysing credibility, legitimacy and relevance and for analysing boundary work turns out to be helpful in describing in detail what happens in practice at the science–policy interface. In particular it helps to address the question of the way participants in the assessment process divide and co-ordinate work, how this shapes design elements and how this enhances credibility legitimacy and relevance of an assessment.  相似文献   

论中国陆相侏罗系——白垩系界线   总被引：2，自引：2，他引：2  

季强柳永清  姬书安陈文吕君昌  尤海鲁袁崇喜 《地质通报》2006,25(3):336-339

介绍了中国学者近几年在陆相侏罗系-白垩系界线研究领域的最新成果,讨论了陆相侏罗系-白垩系界线研究的原则和方法,指出了目前工作中存在的问题,初步认为在建立中国陆相中生界区域年代系统时要特别注意系、统的界线必须与国际接轨,时间上应与国际系、统界线相一致.如果国际地质科学联合会和国际地层委员会最终采用135Ma作为国际侏罗系-白垩系界线的年龄值,那么冀北-辽西地区陆相侏罗系-白垩系界线推测应在张家口组底部,与区域不整合面相一致,表明热河生物群的时代肯定为早白垩世.如果国际侏罗系-白垩系界线的年龄值将来确定为145Ma,那么冀北-辽西地区陆相侏罗系-白垩系界线推测位于土城子组的上部,意味着冀北地区缺失凡兰吟阶的地层,辽西地区可能缺失凡兰吟阶和欧特里沃阶的地层.  相似文献   

GIS中平面面位误差环的解析模型   总被引：15，自引：3，他引：12  

刘文宝  戴洪磊  徐泮林  郭金运 《测绘学报》1998,27(4):338-344

本文基于随机场理论,导出了随机面元的分布函数和概率密度函数。为了衡量随机面元的位置不确定性,将点位误差椭圆和线位误差带进一步扩展到面位误差环指标。根据推求包括线的原理,导出了多边形面位误差环边界线的解析表达式,并分析了面位误差环的构成机理,证明了误差环边界线为连续闭合曲线的结论。最后通过实例绘制了面位误差环的可视化图形。  相似文献   

广义球谐函数及其在梯度边值问题中的应用   总被引：4，自引：0，他引：4  

张传定  陆仲连  吴晓平 《测绘学报》1998,(3):23

本文首先指出球谐函数不是球面上唯一的正交函数系,接着证明了体谐函数的一阶、二阶水平导数（称之为广义球函数）也是球面上的正交函数系,最后利用球面上的正交函数系研究了物理大地测量中的一阶、二阶梯度边值问题。  相似文献   

辽,金,元测绘史考（下）     

吴承园 《测绘工程》1998,7(3):76-81

概述辽、金、元三代有关测绘的管理和机构,职官设置,各类测绘状况及成果,着重介绍了元代的测绘技术,发明创造及著述。  相似文献