塘沽海区海底地形的SAR影像仿真与反演研究   总被引：1，自引：0，他引：1  

夏长水  袁业立 《海洋科学进展》2003,21(4):437-445

利用袁业立、金梅兵(1997)提出的海底地形SAR影像仿真与反演模型，对渤海塘沽海区的一张Radarsat SAR影像进行了仿真和水深反演研究。研究结果表明：仿真影像与真实SAR影像基本吻合，反演水深与实际水深也有较好的一致性；进一步证实了袁业立(1997)SAR成像机理的正确性和在中国近海利用SAR影像进行浅海水深探测的可行性。  相似文献   

Dynamics and control of a towed underwater vehicle system, part I: model development     

B. Buckham  M. Nahon  M. Seto  X. Zhao  C. Lambert 《Ocean Engineering》2003,30(4):82-470

Autonomous vehicles are being developed to replace the conventional, manned surface vehicles that tow mine hunting towed platforms. While a wide body of work exists that describes numerical models of towed systems, they usually include relatively simple models of the towed bodies and neglect the dynamics of the towing vehicle. For systems in which the mass of the towing vehicle is comparable to that of the towed vehicle, it becomes important to consider the dynamics of both vehicles. In this work, we describe the development of a numerical model that accurately captures the dynamics of these new mine hunting systems. We use a lumped mass approximation for the towcable and couple this model to non-linear numerical models of an autonomous surface vehicle and an actively controlled towfish. Within the dynamics models of the two vehicles, we include non-linear controllers to allow accurate maneuvering of the towed system.  相似文献   

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique     

Marco Ortiz 《Marine Ecology》2002,23(1):1-9

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献   

用样条函数计算结果研究冲绳海槽热源机制     

姜效典  王硕儒 《海洋与湖沼》1996,27(4):394-399

对冲绳海槽１９８４－１９９０年的实测热流值，利用数字滤波方法计算，得到反映该区深部地壳热状态的区域热流值为８０－１６０ｍＷ／ｍ＾２，用Ｂ样条函数法对其作数值模拟，计算出海槽地温场模式，并以此研究冲绳海槽海底高热流的形成机制，得出冲绳海槽热流值的区域性变化与綦中地质构造格局呈正相关，高热流是该区现代构造活动所致，其明显特征是地壳减薄，地幔上拱等结论。  相似文献   

Modelling morphological processes in the vicinity of shore-parallel breakwaters     

Julio A. Zyserman  Hakeem K. Johnson 《Coastal Engineering》2002,45(3-4)

  相似文献   

近岸海浪模式在中国东海台风浪模拟中的应用--数值模拟及物理过程研究   总被引：6，自引：2，他引：6  

陈希  闵锦忠  沙文钰  周芦燕 《海洋通报》2003,22(2):9-16

较为详细地介绍了基于能量平衡方程的第三代近岸海浪数值模式SWAN（Simulation Waves Nearshore）及其包含的物理过程（风生浪、底摩擦、白浪耗散、深度诱导波破碎、非线性波－波相作用等），并利用该模式对影响杭州湾－长江口沿岸海域的一次台风浪过程进行了模拟研究：模式所需风场由藤田台风风场模型嵌入对应台风特征等压线，并对相应时段的NCAR／NCEPT资料、单站资料进行同化后提供；利用自嵌套的方式提供波谱边界条件；模式模拟的结果与实际海浪观测资料相符较好，在此基础上，研究了底摩擦、深度诱导波破碎、三波相互作用等物理过程联合对近岸台风浪的影响，初步认识了它们在近岸台风浪生成、传播过程中的重要作用。  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献   

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies     

Graham P. Wilson  Angela L. Lamb  Melanie J. Leng  Silvia Gonzalez  David Huddart 《Estuarine, Coastal and Shelf Science》2005,64(4):685-698

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.  相似文献   

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion     

Q.Y. Zhang   《Ocean Engineering》2006,33(2):137-151

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.  相似文献