A cavity expansion–based solution for interpretation of CPTu data in soils under partially drained conditions     

Pin-Qiang Mo  Xin-Wei Gao  Wenbo Yang  Hai-Sui Yu 《国际地质力学数值与分析法杂志》2020,44(7):1053-1076

A cavity expansion–based solution is proposed in this paper for the interpretation of CPTu data under a partially drained condition. Variations of the normalized cone tip resistance, cone factor, and undrained-drained resistance ratio are examined with different initial specific volume and overconsolidation ratio, based on the exact solutions of both undrained and drained cavity expansion in CASM, which is a unified state parameter model for clay and sand. A drainage index is proposed to represent the partially drained condition, and the critical state after expansion and stress paths of cavity expansion are therefore predicted by estimating a virtual plastic region and assuming a drainage-index–based mapping technique. The stress paths and distributions of stresses and specific volume are investigated for different values of drainage index, which are also related to the penetration velocity with comparisons of experimental data and numerical results. The subsequent consolidation after penetration is thus predicted with the assumption of constant deviatoric stress during dissipation of the excess pore pressure. Both spherical and cylindrical consolidations are compared for dissipation around the cone tip and the probe shaft, respectively. The effects of overconsolidation ratio on the stress paths and the distributions of excess pore pressure and specific volume are then thoroughly investigated. The proposed solution and the findings would contribute to the interpretation of CPTu tests under a random drained condition, as well as the analysis of pile installation and the subsequent consolidation.  相似文献   

Suspended sediment and total dissolved solid yield patterns at the headwaters of Urumqi River,northwestern China: a comparison between glacial and non‐glacial catchments          下载免费PDF全文

Wenhua Gao  Shu Gao  Zhongqin Li  X. X. Lu  Mingjun Zhang  Shengjie Wang 《水文研究》2014,28(19):5034-5047

In order to understand the differences in the suspended sediment and total dissolved solid (TDS) yield patterns between the glacial and non‐glacial catchments at the headwaters of Urumqi River, northwestern China, water samples were collected from a glacier catchment and an empty cirque catchment within the region, during three melting seasons from 2006 to 2008. These samples were analyzed to estimate suspended sediment and TDS concentrations, fluxes and erosion rates in the two adjoining catchments. There were remarked differences in suspended sediment and TDS yield patterns between the two catchments. Suspended sediment concentrations were controlled mainly by the sediment source, whereas TDS concentrations were primarily related to the hydrologic interaction with soil minerals. Generally, the glacial catchment had much higher suspended sediment and TDS yields, together with higher denudation rates, than the non‐glacial catchment. Overall, glacial catchment was mainly dominated by physical denudation process, whereas the non‐glacial catchment was jointly influenced by physical and chemical denudation processes. The observed differences in material delivery patterns were mainly controlled by the runoff source and the glacial processes. The melting periods of glacier and snow were typically the most important time for the suspended sediment and TDS yields. Meanwhile, episodic precipitation events could generate disproportionately large yields. Subglacial hydrology dynamics, glaciers pluck and grind processes could affect erodibility, and the large quantities of dust stored on the glacier surface provided additional sources for suspended sediment transport in the glacial catchment. These mechanisms imply that, in response to climate change, the catchment behaviour will be modified significantly in this region, in terms of material flux. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary     

Fanchao Kong  Dechun Lu  Xiuli Du  Chenpeng Shen 《国际地质力学数值与分析法杂志》2019,43(1):183-211

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.  相似文献   

Efficient DEM‐based overland flow routing using integrated recursive algorithms          下载免费PDF全文

Pin‐Chun Huang  Kwan Tun Lee 《水文研究》2017,31(5):1007-1017

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.  相似文献   

Revised runoff curve number for runoff prediction in the Loess Plateau of China     

Wenhai Shi  Ni Wang  Miaomiao Wang  Donghao Li 《水文研究》2021,35(10):e14390

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.  相似文献   

甘肃省第一次全国地理国情普查数据库设计     

雷瑛  鲍立尚 《测绘与空间地理信息》2016,(2):161-163

地理国情普查数据库是地理国情普查成果数据存储、管理和分发应用的基础,为地理国情动态监测提供本底数据库。本文从甘肃省实际情况出发,结合信息化测绘服务体系和"天地图·甘肃"等现有成果,从数据库概念设计、逻辑设计、物理设计、接口设计,以及数据库管理系统和地理国情展示系统等方面进行了详细的设计,为全面开展地理国情普查数据库建设奠定了坚实的基础。  相似文献   

齐齐哈尔市地理国情分析与表达     

刘艳芳  方佳琳  焦利民  彭金金 《测绘与空间地理信息》2016,(3):5-8

以齐齐哈尔市为例,利用地理国情普查数据与统计年鉴数据,构建自然地表指数、地理区位指数、生态覆被指数,对齐齐哈尔市各县、区的地理国情进行综合分析和地图表达。结果表明,齐齐哈尔市的总体条件较好,但区域差异较大,自然地表条件与地理区位条件均以中部的齐齐哈尔市辖区为优,而生态覆被条件则以北部和西部地区为优。  相似文献   

夏季热带北大西洋海温异常对西北太平洋热带气旋生成的影响          下载免费PDF全文

霍利微  郭品文  张福颖 《大气科学学报》2016,39(1):55-63

利用1979—2012年西北太平洋热带气旋最佳路径资料,Hadley中心的海温资料和NCEP/NCAR再分析资料等,研究了夏季(6—10月)热带北大西洋海温异常与西北太平洋热带气旋(Tropical Cyclone,TC)生成的关系及其可能机制。结果表明,夏季热带北大西洋海温异常与同期西北太平洋TC生成频次之间存在显著的负相关关系。热带北大西洋海温的异常增暖可产生一对东—西向分布的偶极型低层异常环流,其中气旋性异常环流位于北大西洋/东太平洋地区,反气旋异常环流位于西北太平洋地区。该反气旋环流异常使得TC主要生成区的对流活动受到抑制、低层涡度正异常、中低层相对湿度负异常、中层下沉气流异常,这些动力/热力条件均不利于TC生成。此外,西北太平洋地区低层涡旋动能负异常,同时来自大尺度环流的涡旋动能的正压转换也受到抑制,不能为TC的生成和发展提供额外能量源。反之亦然。  相似文献   

地理国情普查外业调绘核查系统实现   总被引：1，自引：0，他引：1  

庄晓东  王海银  胡振彪  韩磊 《测绘科学》2016,41(2):58-61,80

针对传统的基于纸质地图的外业调绘核查工作具有操作复杂、采集数据不精确、作业流程不规范等缺点,该文设计开发了基于iPad的地理国情普查外业调绘核查系统。在内业高精度遥感影像判读的基础上,采用全数字化的外业调绘核查技术,进行地理国情要素移动式、网络化外业调查和验证,快速采集和编辑调查数据,为外业工作提供了一套完整的解决方案。该系统在青岛市崂山区和城阳区的试点中已经得到广泛的应用,较好地验证了移动GIS技术用于外业信息采集的可行性。  相似文献   

湘西北烂泥田锰矿区地质特征与成矿地质条件及成因   总被引：1，自引：0，他引：1       下载免费PDF全文

陈明辉  杨长明  潘君庆  梁惠敏  鲍振襄 《地质找矿论丛》2016,31(4):515-521

湘西北锰矿资源丰富,主要为赋存于南华系大唐坡组下段黑色页岩中。通过对烂泥田锰矿床研究表明,成矿物质来源为深源富锰热液及古陆等多种来源,锰以氧化物或氢氧化物的形式沉淀,菱锰矿的生成与藻类活动密切相关,属于化学-生物化学沉积成因矿床。湘西北地区南华系内自下而上构成钼钒矿→磷矿→锰矿→铅锌矿组成的矿床组合成矿系列,可进行综合找矿、综合评价、扩大矿床经济效益。  相似文献