Dynamics of an active rock glacier (Ötztal Alps, Austria)     

Jana Berger  Karl Krainer  Wolfram Mostler 《Quaternary Research》2004,62(3):233-242

The rock glacier Innere Ölgrube, located in a small side valley of the Kauner Valley (Ötztal Alps, Austria), consists of two separate, tongue-shaped rock glaciers lying next to each other. Investigations indicate that both rock glaciers contain a core of massive ice. During winter, the temperature at the base of the snow cover (BTS) is significantly lower at the active rock glacier than on permafrost-free ground adjacent to the rock glacier. Discharge is characterized by strong seasonal and diurnal variations, and is strongly controlled by the local weather conditions. Water temperature of the rock glacier springs remains constantly low, mostly below 1°C during the whole melt season. The morphology of the rock glaciers and the presence of meltwater lakes in their rooting zones as well as the high surface flow velocities of >1 m/yr point to a glacial origin. The northern rock glacier, which is bounded by lateral moraines, evolved from the debris-covered tongue of a small glacier of the Little Ice Age with its last highstand around A.D. 1850. Due to the global warming in the following decades, the upper parts of the steep and debris-free ice glacier melted, whereas the debris-covered glacier tongue transformed into an active rock glacier. Due to this evolution and due to the downslope movement, the northern rock glacier, although still active, at present is cut off from its ice and debris supply. The southern rock glacier has developed approximately during the same period from a debris-covered cirque glacier at the foot of the Wannetspitze massif.  相似文献   

Seismic activity at the MCT in Sikkim Himalaya     

Reena De  J.R. Kayal   《Tectonophysics》2004,386(3-4):243-248

A microearthquake survey in the Sikkim Himalaya raised a question whether the north–south segment of the Main Central Thrust (MCT) in this part of the Himalaya is seismically active(?). Fault-plane solution of a cluster of events occurred below this segment of the MCT shows right-lateral strike-slip motion. The seismic observations and the geological evidences suggest that a NNE–SSW trending strike-slip fault, beneath this segment, caused right lateral movement on the MCT, and is seismically active.  相似文献   

Crustal thickening in an extensional regime: application to the mid-Norwegian Vøring margin     

J.W. van Wijk  R. van der Meer  S.A.P.L. Cloetingh 《Tectonophysics》2004,387(1-4):217-228

The structure of the mid-Norwegian volcanic Vøring margin at the onset of the Maastrichtian–Paleocene extension phase reflects the cumulative effect of earlier consecutive rifting events. Lateral structural differences present on the margin at that time are a consequence of migration of the location of maximum extension in time between Norway and Greenland. The most important imprints (Moho depth, thermal structure) of these events on the lithosphere are incorporated in a numerical simulation of the final extension phase. We focus on a possible mechanism of formation of the Vøring Marginal High and address the relationship between spatial and temporal evolution of crustal thinning and thickening, uplift of the surface and strength of the lithosphere.It is found that the Vøring Basin formed the strongest part of the margin which explains why the Maastrichtian–Paleocene rift axis was not located here but instead jumped westward with respect to the earlier rift axes locations. The modeling study predicts that local crustal thickening during extension can be expected when large lateral thermal variations are present in the lithosphere at the onset of extension. Negative buoyancy induced by lateral temperature differences increases downwelling adjacent to the rifting zone; convergence of material at the particular part of the margin is mainly taken up by the lower crust. The model shows that during the final phase of extension, the crust in the Vøring Marginal High area was thickened and the surface uplifted. It is likely that this dynamic process and the effects of magmatic intrusions both acted in concert to form the Marginal High.  相似文献   

中国土壤系统分类——土纲级别多样性格局     

张学雷  龚子同  ZHANG XUELEI  Gong Zitong 《地理学报(英文版)》2004,14(Z1)

  相似文献   

A model of Cs activity profile for soil erosion studies in uncultivated soils of Mediterranean environments     

J. Soto  A. Navas   《Journal of Arid Environments》2004,59(4):37

A model to simulate ¹³⁷Cs profiles in soils during the time in which they are being eroded is proposed. The model uses one parameter to characterize the cesium transference in the soil and another to express the erosion rate. To test the model, ¹³⁷Cs profiles of stable and eroded soils were collected at sampling sites located on semi-arid and temperate slopes in the Central Ebro basin, Spain. The ¹³⁷Cs profiles, corresponding to uncultivated soils with natural vegetation cover, were simulated using this model. The ¹³⁷Cs inventories and profiles calculated with the model are very similar to those measured experimentally, and thus it is possible to calculate soil erosion rates in physiographically diverse Mediterranean environments.  相似文献   

Changes in soil organic carbon and other physical soil properties along adjacent Mediterranean forest, grassland, and cropland ecosystems in Turkey   总被引：4，自引：0，他引：4  

F. Evrendilek  I. Celik  S. Kilic 《Journal of Arid Environments》2004,59(4):811

Cultivation, overgrazing, and overharvesting are seriously degrading forest and grassland ecosystems in the Taurus Mountains of the southern Mediterranean region of Turkey. This study investigated the effects of changes on soil organic carbon (SOC) content and other physical soil properties over a 12-year period in three adjacent ecosystems in a Mediterranean plateau. The ecosystems were cropland (converted from grasslands in 1990), open forest, and grassland. Soil samples from two depths, 0–10 and 10–20 cm, were collected for chemical and physical analyses at each of cropland, open forest, and grassland ecosystems. SOC pools at the 0–20 cm depth of cropland, forest, and grassland ecosystems were estimated at 32,636, 56,480, and 57,317 kg ha⁻¹, respectively. Conversion of grassland into cropland during the 12-year period increased the bulk density by 10.5% and soil erodibility by 46.2%; it decreased SOM by 48.8%, SOC content by 43%, available water capacity (AWC) by 30.5%, and total porosity by 9.1% for the 0–20 cm soil depth (p<0.001). The correlation matrix revealed that SOC content was positively correlated with AWC, total porosity, mean weight diameter (MWD), forest, and grassland, and negatively with bulk density, pH, soil erodibility factor, and cropland. The multiple regression (MLR) models indicated that any two of the three ecosystems and one of the two soil depths accounted for 86.5% of variation in mean SOC values ((p<0.001).  相似文献   

A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment   总被引：1，自引：0，他引：1  

Wim M. Cornelis  Donald Gabriels  Roger Hartmann 《Geomorphology》2004,59(1-4):43

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.  相似文献   

河南省土壤湿度年变化规律   总被引：1，自引：0，他引：1  

方文松王友贺  师丽魁 《河南气象》2005,(2):26-27

利用河南省土壤墒情预报模型中建立的河南省台站土壤墒情数据库资料，对不同类型土壤湿度进行分析，从而确定不同类型土壤湿度差异、地下水对土壤湿度的影响及河南省土壤湿度的年变化规律。  相似文献   

华北活动地块区南缘阜南-霍邱地区地壳活动习性初探     

姚大全  刘加灿 《中国地震》2005,21(2):216-223

阜南-霍邱地区地处华北和华南活动地块区边缘构造带，通过对其进行地震地质调查和综合分析研究，发现晚更新世以来该区存在强度较弱的构造变形现象，即：小震沿着主要断裂呈线性条带状分布；研究区南部及断裂近侧的上更新统中发育共轭剪节理；1970年代，研究区固始、霍邱和阜南等地陆续发生过长度不一、宽窄不等、方向不同的地裂缝，展布与肥中断裂或王老人集断裂近乎一致。本文认为，研究区局部小震丛集、上更新统中赋存共轭剪节理、裂面充填物显微揉皱变形和现代地裂缝的生成等现象，反映出地壳能量被缓慢释放和相应断裂发生微弱活动；研究区曾发生过一次破坏性地震(江口集Ms43/4地震)。综上所述，研究区地壳晚第四纪以来具有微弱活动性，且主要表现为蠕滑活动方式。  相似文献   

Image processing of 2D resistivity data for imaging faults   总被引：6，自引：0，他引：6  

F. Nguyen  S. Garambois  D. Jongmans  E. Pirard  M.H. Loke   《Journal of Applied Geophysics》2005,57(4):260-277

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.  相似文献