改性填料提高复合材料抗冲击性能研究     

余志伟 《地球科学与环境学报》2001,23(3):75-78

通过对填料表面进行改性来提高复合材料抗冲击性能.采用间歇式循环冲击仪对复合材料进行冲击性能试验.试验结果表明,复合材料的抗冲击强度得到明显改善,为提高复合材料抗冲击性能开辟了一条新的有效途径.  相似文献   

非饱和土地基中复合多层波阻板对S波的隔离效应     

舒进辉  马强  常立君 《岩土力学》2023,44(1):217-231

基于弹性波在非饱和多孔介质与单相弹性介质中的传播理论,考虑在非饱和土地基中设置一定厚度的复合多层波阻板（复合多层波阻板以3层为例）,利用Helmholtz矢量分解定理,推导了非饱和土地基中S波通过复合多层波阻板的透射、反射振幅比的解析解。通过数值算例,分析了层间波阻板剪切模量和密度等物理力学参数对非饱和土地基中S波通过复合多层波阻板时传播特性的影响规律。结果表明：复合多层波阻板中层间波阻板材料的剪切模量和密度对透反射系数影响显著。复合多层波阻板是一种有效的隔振屏障,严格控制层间波阻板的剪切模量和密度可以获得最佳隔振效果,这为复合多层波阻板在地基振动控制领域中的应用提供理论指导。  相似文献   

考虑桩体刺入变形的透水混凝土桩复合地基固结理论研究     

韩柏林卢萌盟 《岩土力学》2023,(8):2360-2368

现有的多元复合地基利用两种或者两种以上的桩型对地基土进行加固,以期提高地基承载力、加速地基固结。提出了一种兼具散体材料桩和刚性不排水桩自身优点的透水混凝土桩复合地基固结模型。工程中刚性桩与土体的压缩量并不相等,这与等应变条件存在着不一致的地方。为此,抛弃传统等应变假设,考虑桩体向垫层和下卧层的刺入变形,对传统等应变假定进行修正,同时考虑了扰动区土体水平渗透系数的抛物线变化和水在桩体内的径向、竖向渗流,给出了此类固结问题的控制方程和解答以及复合地基固结度的表达式,并对复合地基固结度的解进行了讨论。最后与其他复合地基解做了比较并对固结性状进行了分析,并针对透水混凝土桩孔隙引起的桩阻作用对地基固结速度的影响进行了验证。  相似文献   

竖波钢板组合剪力墙震损修复研究          下载免费PDF全文

王威  赵昊田  权超超  宋鸿来  李昱  周毅香 《世界地震工程》2022,38(2):067-79

钢板组合剪力墙在强震作用下受损严重,震损修复问题较为突出。现设计一片以方钢管作为边缘约束构件的竖波钢板组合剪力墙,在最大弹塑性层间位移角时的震损情况进行分析:竖波钢板组合剪力墙边缘约束方钢管刚度较大,与墙体不匹配,最终发生方钢管从地梁拔动的脆性破坏模式。对竖波钢板组合剪力墙进行震损修复,得到墙趾可更换竖波钢板组合剪力墙,然后进行拟静力试验。试验结果表明:（1）在震损后的竖波钢板组合剪力墙的墙趾处安装阻尼器,其抗震性能基本得到恢复。（2）修复后的竖波钢板组合剪力墙承载力较修复前降低了23%,但延性和耗能能力显著提升。（3）改变了竖波钢板组合剪力墙的破坏模式,由脆性破坏转化为延性破坏。借助有限元软件详细讨论了内嵌竖向波形钢板厚度和波角、轴压比、阻尼器腹板数量对修复后竖波钢板组合剪力墙抗剪承载力的影响,结果表明:改变内嵌竖向波形钢板厚度对试件抗剪承载力影响较大,而改变内嵌竖向波形钢板波角、轴压比和阻尼器腹板数量对试件抗剪承载力影响较小。结合有限元算例,提出修复后竖波钢板组合剪力墙抗剪承载力的计算公式,可为工程实际提供参考。  相似文献   

开封断裂第四纪活动特征     

孙杰  张予川  徐婉君  李涛  张扬 《震灾防御技术》2022,17(2):234-241

开封断裂是郑州-开封断裂带的重要组成部分,也是黄河中下游平原的一条重要控制性断裂。利用浅层地震勘探发现,开封断裂为总体走向EW,倾向N的正断层;断裂分为东、西2支,断裂活动性具有明显的分段特征,东支活动性较西支强。钻孔联合剖面揭示开封断裂东支断裂上断点埋深27～35 m,根据地层年代学结果,其最新活动时间为晚更新世。研究成果为开封市城乡规划、重大工程选址和地震区划工作提供了重要的基础数据。  相似文献   

Drilling Technology of the M-1 Well in Hot Dry Rock of Matouying,Tangshan北大核心CSCD   总被引：1，自引：0，他引：1  

张云  高亮  刘现川  赵岩  王德  张建永 《地质与勘探》2022,58(1):176-186

This paper presents the general situation and key techniques of the drilling well M-1 in Matouying dry hot rock exploration hole, Leting, Tangshan, Hebei Province. A series of problems have been studied on the sea water drilling fluid, high temperature resistant fresh water drilling fluid, screw composite drilling technique, screw hole coring technology, and high temperature, thus solving the difficulty of sea water drilling fluid well protection, poor stability of drilling fluid under high temperature, and low efficiency in hot dry rock drilling and coring drilling to ensure the safety of the borehole and improve drilling efficiency. The high temperature resistant double condensation and double density cement slurry system and relevant technical measures are adopted to ensure the quality of cementing in the high temperature environment. Through the understanding and analysis of the strata in this area, this work provides valuable experience for drilling in the same strata in the future. The final hole depth of the M-1 well in Matouying is 4502. 11m, and hot dry rock with a temperature of 150t is found at 3965 m, which is the first hot dry rock well with a temperature of more than 150°C in the Beijing-Tianjin-Hebei region so far. © 2022 Editorial Board of Geology and Exploration. All rights reserved.  相似文献   

联合剖面法在地下热水勘探中的应用   总被引：1，自引：0，他引：1  

李爽  杨国民  卜志伟 《地下水》2015,(3)

联合剖面法是勘查地下热水中一种比较简便的方法,近年来得到了广泛应用。应用此法并结合区域地质和构造特征,了解地热田地质结构、热储、盖层、热储类型等。根据联合剖面装置获得的低阻正交点,推断出断裂构造的位置,为确定井位及温泉开发利用提供重要依据。  相似文献   

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand          下载免费PDF全文

Tania Villaseñor  John M. Jaeger  Kathleen M. Marsaglia  Greg H. Browne 《Sedimentology》2015,62(4):1118-1148

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.  相似文献   

冀中坳陷下第三系构造背斜成因分类   总被引：1，自引：1，他引：0  

梁苏娟  刘池洋  王定一 《地球科学与环境学报》2002,24(1):25-28

冀中坳陷的下第三系构造背斜主要形成于伸展断陷背景下 ,与正断层系统联系紧密。根据背斜与断层关系 ,基本类型可分为 3种 ,即纵向、横向和复合背斜 ;根据具体构造力学背景 ,这 3种背斜可进一步分为 8类 ,即 :重力滑动型、张扭型、拆离拱张型、逆牵引型、断层线偏转型、侧接型、复杂变换型、复合型。这些背斜是构造演化的产物 ,在一定程度上指示了坳陷内的构造演化规律 ,同时又是形成油气藏的有利圈闭 ,目前已取得显著勘探成效  相似文献   

A Time-Transformed Leapfrog Scheme     

Seppo Mikkola  Sverre Aarseth 《Celestial Mechanics and Dynamical Astronomy》2002,84(4):343-354

We present a time-transformed leapfrog scheme combined with the extrapolation method to construct an integrator for orbits in N-body systems with large mass ratios. The basic idea can be used to transform any second-order differential equation into a form which may allow more efficient numerical integration. When applied to gravitating few-body systems this formulation permits extremely close two-body encounters to be considered without significant loss of accuracy. The new scheme has been implemented in a direct N-body code for simulations of super-massive binaries in galactic nuclei. In this context relativistic effects may also be included.  相似文献