Influence of transducer-ground coupling on vibration measurements   总被引：1，自引：0，他引：1  

G. R. Adhikari  A. I. Theresraj  R. N. Gupta 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(2):79-92

Various methods of transducer mounting provide varying degrees of coupling between the transducer and the measurement surface. The influence of four of these methods on vibration measurements was studied. For this purpose, the first transducer was placed freely on a horizontal surface, the second one was 'sandbagged', the third one was 'spiked' and the fourth one was completely buried in soil. These transducers were mounted side by side and ground vibrations were monitored for 14 blasts at an opencast coal mine.

Ground vibrations in terms of peak particle velocity, peak vector sum and frequency with different mounting methods were analysed. Assuming the data of the buried transducer as the most acceptable one, relative values of other transducers were determined and plotted. For the given tolerance for instrumental and human errors, anomalous readings were found in some cases. The waveforms of the buried transducer were then compared with those of others. Clear distortion in the waveforms or a very low correlation coefficient between two waveforms was suspected poor coupling.

The results indicate that decoupling is most likely with the surface transducer. However, the sandbagged and spiked transducers are also prone to decoupling. Decoupling can result in higher or lower ground vibration. Therefore, burial should be the preferred method for mounting of transducers in soil.  相似文献   

Implicit integration under mixed controls of a breakage model for unsaturated crushable soils          下载免费PDF全文

Yida Zhang  Giuseppe Buscarnera 《国际地质力学数值与分析法杂志》2016,40(6):887-918

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

The influence of coupled physical swelling and chemical reactions on deformable geomaterials     

Yue Ma  Xiao‐Hui Chen  Lee J. Hosking  Hai‐Sui Yu  Hywel R. Thomas  Simon Norris 《国际地质力学数值与分析法杂志》2021,45(1):64-82

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.  相似文献   

Inverse modelling using PS‐InSAR data for improved land subsidence simulation in Las Vegas Valley,Nevada          下载免费PDF全文

Meijing Zhang  Thomas J. Burbey 《水文研究》2016,30(24):4494-4516

Las Vegas Valley has had a long history of groundwater development and subsequent surface deformation. InSAR interferograms have revealed detailed and complex spatial patterns of subsidence in the Las Vegas Valley area that do not coincide with major pumping regions. This research represents the first effort to use high spatial and temporal resolution subsidence observations from InSAR and hydraulic head data to inversely calibrate transmissivities (T), elastic and inelastic skeletal storage coefficients (S_ke and S_kv) of the developed‐zone aquifer and conductance (CR) of the basin‐fill faults for the entire Las Vegas basin. The results indicate that the subsidence observations from InSAR are extremely beneficial for accurately quantifying hydraulic parameters, and the model calibration results are far more accurate than when using only groundwater levels as observations, and just a limited number of subsidence observations. The discrepancy between distributions of pumping and greatest levels of subsidence is found to be attributed to spatial variations in clay thickness. The Eglington fault separates thicker interbeds to the northwest from thinner interbeds to the southeast and the fault may act as a groundwater‐flow barrier and/or subsidence boundary, although the influence of the groundwater barrier to this area is found to be insignificant. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing          下载免费PDF全文

Yu‐Yong Jiao  Huan‐Qiang Zhang  Xiu‐Li Zhang  Hai‐Bo Li  Qing‐Hui Jiang 《国际地质力学数值与分析法杂志》2015,39(5):457-481

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images          下载免费PDF全文

Pei Leng  Xiaoning Song  Si‐Bo Duan  Zhao‐Liang Li 《水文研究》2017,31(6):1398-1407

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.  相似文献   

A fully coupled THM model based on a non‐equilibrium thermodynamic approach and its application          下载免费PDF全文

Z. Zhang  X. Cheng 《国际地质力学数值与分析法杂志》2017,41(4):527-554

  相似文献   

PPP/SINS紧耦合系统仿真的研究与分析     

杨伟彬  高龑  王云鹏 《测绘与空间地理信息》2016,(8):113-116

在捷联惯导(SINS)和GPS卫星接收机进行紧耦合的研究中,采用差分定位进行紧耦合的方法比较成熟,而关于精密单点定位(PPP)与捷联惯导紧耦合的研究还比较少。本文对精密单点定位与捷联惯导紧组合系统进行了Matlab仿真,利用数学解析的方法产生机载运动轨迹,通过设置系统的参数,获得仿真SINS和GPS数据;然后,通过PPP/SINS紧组合系统的仿真程序解算,将定位结果与PPP的结果比较,表明PPP/SINS紧组合导航定位的结果比PPP的精度和可靠性好,而且收敛的速度更快,同时也验证了算法的正确性。最后,分析了不同等级惯导对定位精度的影响。  相似文献   

The evolution of the electronics industry in Johor (Malaysia): Strategic coupling,adaptiveness, adaptation,and the role of agency     

《Geoforum》2016

Bringing together concepts from the global production networks and evolutionary economic geography literature, this article empirically examines the trajectory of the electrical and electronics industry in Johor (Malaysia). Based on trends in firm entries and exit as well as interviews with companies, we find limited robustness in the industry’s trajectory. While there is evidence of the role of ‘structure’ in this outcome, we argue that human agency – particularly the actions of subnational policy-makers – is key. This is manifest in a preference for fostering regional ‘adaptiveness’ through the often uncritical promotion of a diversity of economic sectors. This compromises the meaningful pursuit of regional ‘adaptation’ in the form of new and more complex branches emerging from existing industries. This arrested development, in turn, hinders an effective strategic coupling between the regional economy and multinational corporations, thus undermining regional resilience.  相似文献   

Effects of surface flux parameterization on the numerically simulated intensity and structure of Typhoon Morakot (2009)     

Jie Ming  Jun A. Zhang 《大气科学进展》2016,33(1):58-72

The effects of surface flux parameterizations on tropical cyclone(TC) intensity and structure are investigated using the Advanced Research Weather Research and Forecasting(WRF-ARW) modeling system with high-resolution simulations of Typhoon Morakot(2009).Numerical experiments are designed to simulate Typhoon Morakot(2009) with different formulations of surface exchange coefficients for enthalpy(C_K) and momentum(C_D) transfers,including those from recent observational studies based on in situ aircraft data collected in Atlantic hurricanes.The results show that the simulated intensity and structure are sensitive to C_K and C_D,but the simulated track is not.Consistent with previous studies,the simulated storm intensity is found to be more sensitive to the ratio of C_K/C_D than to C_K or C_D alone.The pressure-wind relationship is also found to be influenced by the exchange coefficients,consistent with recent numerical studies.This paper emphasizes the importance of C_D and C_K on TC structure simulations.The results suggest that C_D and C_K have a large impact on surface wind and flux distributions,boundary layer heights,the warm core,and precipitation.Compared to available observations,the experiment with observed C_D and C_K generally simulated better intensity and structure than the other experiments,especially over the ocean.The reasons for the structural differences among the experiments with different C_D and C_K setups are discussed in the context of TC dynamics and thermodynamics.  相似文献