地质学方法估算准噶尔盆地西山窑组剥蚀厚度     

王敏芳  ;李平平 《西安地质学院学报》2007,(1):30-33

综合利用地层对比法和沉积速率法估算了准噶尔盆地西山窑组剥蚀厚度，用全盆地34条二维区域地震测线资料，估算了西山窑组剥蚀厚度的平面分布特征。利用单井的地质分层和精细年代格架数据，估算了西山窑组的单井剥蚀厚度。对比结果表明，两者剥蚀厚度的估算结果相近，绝对误差最大不超过50m，相对误差在20％以内。估算结果表明，准噶尔盆地腹部西山窑组剥蚀厚度为100-400m，且自北东向南西，剥蚀厚度逐渐增大，在南部剥蚀厚度可大于400m。  相似文献   

声波测井薄层厚度计算公式的研究与应用     

吴奇  汤井田 《物探化探计算技术》2007,29(1):26-29

以解决工程实践难题为目的,首次提出了根据换能器与薄层所处位置不同,分别利用其不同求薄层厚度公式之观点。研究了声波测井薄层厚度定量计算公式,详细介绍了公式在高背景上检出Vp低值薄层,在低背景上检出Vp高值薄层的应用情况。并就薄层纵波速度的获取以及如何选用合适计算公式等问题作了一些探讨。同时,通过实例证明了这些措施对提高薄层厚度定量计算精度的重要性。  相似文献   

Prediction of Apparent Equivalent Thickness Using the Spontaneous Potential Method and Its Application to Oilfield Development     

王君恒潘竹平  孙树文郭雷 《中国地质大学学报(英文版)》2007,18(3):269-279

The upper spontaneous potential produced by oil and gas accumulation is of a stable potential field, and its intensity is directly proportional to the content of the source and inversely proportional to the radius apart from the source. Theoretical research and practical results show that anomalies of spontaneous potential can indicate oil-bearing sandstone bodies and locate the areas of oil and gas accumulation. In oil areas which have fewer reservoir beds, the petroleum reservoir thickness can be predicted by determining the linear relationship between potential intensity and apparent equivalent thickness. In the Weixing （卫星） oilfield, which is devoid of sufficient reservoir beds, its apparent equivalent thickness can be predicted by the linear equation h= -0.19x＋0.74. On the basis of geological research, we use the spontaneous potential method to predict the equivalent thickness, helping in the selection of the most appropriate drill sites to enhance the probability of successful well boring so as to serve the next round development of the oilfield.  相似文献   

Turbidite bed thickness distributions: methods and pitfalls of analysis and modelling     

ZOLTÁN SYLVESTER 《Sedimentology》2007,54(4):847-870

Turbidite bed thickness distributions are often interpreted in terms of power laws, even when there are significant departures from a single straight line on a log–log exceedence probability plot. Alternatively, these distributions have been described by a lognormal mixture model. Statistical methods used to analyse and distinguish the two models (power law and lognormal mixture) are presented here. In addition, the shortcomings of some frequently applied techniques are discussed, using a new data set from the Tarcău Sandstone of the East Carpathians, Romania, and published data from the Marnoso‐Arenacea Formation of Italy. Log–log exceedence plots and least squares fitting by themselves are inappropriate tools for the analysis of bed thickness distributions; they must be accompanied by the assessment of other types of diagrams (cumulative probability, histogram of log‐transformed values, q–q plots) and the use of a measure of goodness‐of‐fit other than R², such as the chi‐square or the Kolmogorov–Smirnov statistics. When interpreting data that do not follow a single straight line on a log–log exceedence plot, it is important to take into account that ‘segmented’ power laws are not simple mixtures of power law populations with arbitrary parameters. Although a simple model of flow confinement does result in segmented plots at the centre of a basin, the segmented shape of the exceedence curve breaks down as the sampling location moves away from the basin centre. The lognormal mixture model is a sedimentologically intuitive alternative to the power law distribution. The expectation–maximization algorithm can be used to estimate the parameters and thus to model lognormal bed thickness mixtures. Taking into account these observations, the bed thickness data from the Tarcău Sandstone are best described by a lognormal mixture model with two components. Compared with the Marnoso‐Arenacea Formation, in which bed thicknesses of thin beds have a larger variability than thicknesses of the thicker beds, the thinner‐bedded population of the Tarcău Sandstone has a lower variability than the thicker‐bedded population. Such differences might reflect contrasting depositional settings, such as the difference between channel levées and basin plains.  相似文献   

利用地基土应力分布原理确定砂垫层厚度     

刘翔  姜秀萍 《国土资源》1998,(2)

软弱土层场地若采用天然地基不能满足建筑物所需强度与沉降要求,采用换土撼砂法就可以提高地基的承载力。运用应力分布原理合理确定撼砂层厚度不仅可保证工程稳固性,并可节约投资和缩短工期。  相似文献   

扫描电镜分析各类微体化石样品最佳镀膜的探讨   总被引：1，自引：0，他引：1  

张素新  严春杰 《地质科技情报》1998,17(4):98-100

根据多年的工作经验和试验对比,总结出了非导电微体化石－放射虫,硅藻,竹节石,有孔虫,介形虫,轮藻,牙形石,海绵骨针等的最佳镀膜方法和最佳镀膜厚度。  相似文献   

试用矢量表示岩层真厚度     

许边远 《地质通报》1998,(1)

在野外地质测量工作中,岩层真厚度历来使用标量计算。文中证明：如果规定在导线前进方向上,凡是自下部向上部测得的岩层真厚度为正厚度,反之则为负厚度,可以使用公式Ｍ＝Ｌ·［ｓｉｎβ·ｃｏｓε·ｃｏｓ（－λ）＋ｓｉｎε·ｃｏｓβ］进行岩层真厚度计算。该公式各参数的取值范围与野外实测剖面过程中各数值可能出现的范围相同,而且所有数据均可直接取于野外实测剖面数据记录表,不需要对数据作任何处理,计算过程简单准确。其计算结果不但可得出岩层的真厚度,而且还可真实地反映出岩层之间的上下关系,从而使岩层厚度具有矢量性质。  相似文献   

Mantle heat flow and geotherms for major tectonic units in central Europe     

Jacek Majorowicz 《Pure and Applied Geophysics》1978,117(1-2):109-123

The results of seismic measurements along the deep seismic sounding profile VII and terrestrial heat flow measurements used for construction of heat generation models for the crust in the Paleozoic Platform region, the Sudetic Mountains (Variscan Internides) and the European Precambrian Platform show considerable differences in mantle heat flow and temperatures. At the base of the crust variations from 440–510°C in the models of Precambrian Platform to 700–820°C for the Paleozoic Platform and the Variscan Internides (Sudets) are found. These differences are associated with considerable mantle heat flow variations.The calculated models show mantle heat flow of about 8.4–12.6 mW m^–2 for the Precambrian Platform and 31 mW m^–2 to 40.2 mW m^–2 for Paleozoic orogenic areas. The heat flow contribution originating from crustal radioactivity is almost the same for the different tectonic units (from 33.5 mW m^–2 to 37.6 mW m^–2). Considerable physical differences in the lower crust and upper mantle between the Precambrian Platform and the adjacent areas, produced by lateral temperature variations, could be expected. On the basis of carbon ratio data it can be concluded that the Carboniferous paleogeothermal gradient was much lower in the Precambrian Platform area than in the Paleozoic Platform region.  相似文献   

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application     

J. M. Segura  I. Carol 《国际地质力学数值与分析法杂志》2008,32(18):2103-2123

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

A complex variable solution for stress and displacement field around a lined circular tunnel at great depth     

Ming‐Bin Wang  Shu‐Cai Li 《国际地质力学数值与分析法杂志》2009,33(7):939-951

By applying the series expansion technique in the complex variable method established by Muskhelishvili, the plane elasticity problem for the stress and displacement field around a lined circular tunnel in conjunction with the consideration of misfit and interaction between the liner and the surrounding geomaterial is dealt with. The tunnel is assumed to be driven in a homogeneous and isotropic geomaterial. The coefficients in the Laurent series expansion of the stress functions are determined. The complex potentials in the liner and the surrounding geomaterial are explicitly derived, respectively. As an example, the case of a lined circular tunnel located in an isotropic initial stress field but subjected to uniform internal pressure is numerically considered. Numerical results indicate that the installation of tunnel liner can reduce the influences of the tunnel excavation on the in situ displacement and stress fields. However, the relative thickness and rigidity of the liner should be in an appropriate range. In addition, the effect of the tunnel excavation upon the displacement field is more significant than that upon the stress field. As far as the stress field in the surrounding geomaterial is concerned, when the ratio between the cover depth of tunnel and the tunnel radius is larger than 5, the results for the stress field in the paper are applicable. When the ratio between the tunnel depth and the tunnel radius is larger than 20, the results are applicable for the displacement field. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献