新亚欧大陆桥的走向及相关问题探讨     

顾家Yu 《干旱区地理》1996,19(2):74-77

第二亚欧大陆桥已成为国际社会关注的焦点之一，但各国对其走向有着不同的见解和主张。本文概述了第二亚欧大陆桥各种走向的有关问题，并强调对其沿线环境灾害必须重视加以治理。  相似文献   

SSQ-1 Digital Tape Recording Horizontal Pendulum Tiltmeter     

Hu Zhu  Hai-Ying Feng  Fa-Cheng Gao  Zhong-Guo Tang  Biao Ouyang 《地震学报(英文版)》1993,6(4):1031-1039

The SSQ-1 Digital Tape Recording Horizontal Pendulum Tiltmeter is an instrument of high sensitivity to detect the changes of ground tilt. It uses a quartz horizontal pendulum held by Z?llner bifilar suspension to sense vertical displacement, the eddy-current transducer on the pendulum converts its displacements into electric signals. Then a microcomputer is used for data acquisition and printing as well as digit tape recording. And at the same time, a filtering pen recorder is used for visible recording. The scale value of the instrument is calibrated by computer using the known tilt angle of the bulging plate — mercury cup. The scale value is 0.3–0.5 m(″)/mV. The following are the testing results for the earth tide observation obtained from the east-west component at Baijiatan Seismic Station, Beijing: r(O₁): 0.6490±0.0179 α(O₁): −3.83°±1.58° r(K₁): 0.8049±0.0128 α(K₁): 1.40°±0.90° r(M₂): 0.6699±0.0040 α(M₂): −0.27°±0.34° r(S₂): 0.7316±0.0075 α(S₂): 2.83°±0.58° r(M₃): 0.8497±0.0964 α(M₃): 1.61°±6.51° The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 353–359, 1993. In this work also participated Mr. Huai-Wen PAN and Wei-Jin ZHANG. And we here give special thanks to Yun-Zao XI, Qin-Wen XI, Bo-Xong TANG, Yi-Hui CHEN and An-Xu WU for their kind help in the development and test of the instrument. This paper is translated by Mr. Zhong ZHENG.  相似文献   

电感耦合等离子体发射光谱法测定键合用硅铝丝中硅铁铜     

宋小年  冯天培 《岩矿测试》2006,25(2):189-190196

采用电感耦合等离子体发射光谱法测定硅铝丝（Al—1％Si）中Si及杂质元素Fe和Cu。确定了最少取样量和样品溶解方法，优化了元素分析谱线和仪器的测量条件。实验表明，方法的加标回收率为99％～1叭％，相对标准偏差（n=6）低于1．4％，Si、Fe、Cu的检出限分别为8．5、1．0和0．4μg／L。该方法应用于快速测定键合硅铝丝中的各种元素，结果满意。  相似文献   

速度传感反馈地震计的动态范围上限     

饶文松  杨晓源 《地震地磁观测与研究》2007,28(5):63-70

在开环参数一定的条件下,速度传感反馈地震计中的环路滤波是影响地震计主要技术指标的关键环节之一.本文探讨了一阶极点高通、一阶极点低通、一阶零点高通、双一阶和零阶环路滤波在扩展地震计动态范围上限方面的优缺点.研究指出,对于用闭环反馈直接生成主导二阶极点的速度传感反馈地震计,一阶零点高通环路滤波的优点较多;若允许在环外生成主导二阶极点,则零阶环路滤波也不失为一个较好的方案.  相似文献   

A method to improve the alignment performance for GPS-IMU System   总被引：1，自引：0，他引：1  

Yufeng Zhang  Yang Gao 《GPS Solutions》2007,11(2):129-137

Zero velocity and zero east component of rotation rate relative to local geographic frame have been traditionally applied as measurements for fine alignment of a GPS-IMU system. The performance of the fine alignment, however, will be affected by several types of inertial sensor errors, which could cause part of the Kalman filter states to be unobservable. To overcome this problem, a new method that utilizes the total outputs of the gyro triad and the accelerometer triad as part of the measurements has been proposed by the authors. The initial results have confirmed the effectiveness of the method. In this paper, the observability for both traditional and new alignment methods will be first reviewed. The results from computer simulations will then be presented to compare the traditional and the new alignment methods for the purpose of evaluating the performance of the proposed new method. Data acquired from real inertial sensors will also be applied to assess the traditional and new alignment methods by analyzing their innovation sequences from the Klaman filter. Based on a paper presented at the 18th International Technical Meeting of the Satellite Division of the Institute of Navigation, Long Beach, California, September 2005.  相似文献   

Prediction of the sawing quality of Marmarit stones using the capability of artificial neural network     

Hassan Yarmohamadi Samani  Ali Reza Yarahmadi Bafghi 《国际地质力学数值与分析法杂志》2012,36(7):881-891

The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Multiscale approach to geo‐composite cellular structures subjected to rock impacts     

François Nicot  Philippe Gotteland  David Bertrand  Stéphane Lambert 《国际地质力学数值与分析法杂志》2007,31(13):1477-1515

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

高精度矢量数据的路面三维自动建模方法     

李晓丽  刘如飞  汤玉兵  任红伟  柴永宁 《测绘通报》2021,(7):70-73

为了解决路面手工三维建模速度慢、工作量大等问题,本文面向规范化处理的高精度矢量数据,对不同路口进行精细化设计,自动生成路面三维模型。首先使用道路高精度三维信息采集软件,在获取的点云数据中半自动化提取准确的道路边线、道路标识线等矢量信息;然后针对不同路口进行精细化线形设计,提出连续四边形重建方法、弯道平滑处理方法、交叉口重建方法及路面标识线投射重建方法;最后对提取的高精度矢量数据进行规范化处理,在满足路面线形设计要求后,借助MAXScript脚本实现路面三维自动化建模。以车载移动测量系统获取的某段道路点云数据进行试验,验证了该方法的可行性和有效性。  相似文献   

基于LabwindowsCVI的外腔半导体激光器数字稳频系统设计     

刘丹丹  吴长江  阮军  刘杰  张首刚 《时间频率学报》2010,33(2)

为抑制外腔半导体激光器频率漂移,提高频率稳定性,提出一种数字稳频方法。该方法采用数据采集卡,基于LabwindowsCVI语言实现数字锁相放大模块获得稳频误差信号,通过此信号控制压电陶瓷电压,将852 nm外腔半导体激光器的频率锁在铯原子谱线上,实现20 s频率稳定度8.7×10-11。该数字稳频方法降低了人力成本,易升级和修改,具有移植性好和用户界面友好等优点。  相似文献   

低频电磁波与地倾斜传感器对地震预报分析与研究     

李泉溪  银兵  吴用玖 《四川地质学报》2010,30(3):372-375

5.12大地震对国家造成了一次重大的损失,则对地震预报的研究则显得尤为重要。本文认为地震发生的机理是板块挤压破裂学说。在地震动发生前后都会出现一些宏观或微观异常,在地震发生前其微观异常主要表现为电磁波、地壳倾斜、地应力等异常。本方通过对低频电磁波和地倾斜进行测量和研究,可通过数据多台站共享来进行地震预报分析。  相似文献