云南某工区F1断裂断层物质特征及其意义   总被引：2，自引：0，他引：2  

张秉良  方仲景 《华南地震》1993,13(4):39-45

断层物质是断层活动的产物,采用多种测试技术从断层物质中必定能提取出与断层活动有关的信息。通过对F_1断裂断层泥中粘土矿物X射线衍射、热释光测年、石英碎砾SEM观测、断层泥显微构造分析等多种方法的综合研究,结果表明,F_1断裂最后一次活动时期在中更新世晚期,活动方式是以粘滑为主,且断层泥形成时温度小于200℃。  相似文献   

Weathering of sulfidic shale and copper mine waste: secondary minerals and metal cycling in Great Smoky Mountains National Park,Tennessee, and North Carolina,USA   总被引：6，自引：0，他引：6  

Jane?M.?HammarstromEmail author  Robert?R.?SealII  Allen?L.?Meier  John?C.?Jackson 《Environmental Geology》2003,45(1):35-57

Metal cycling via physical and chemical weathering of discrete sources (copper mines) and regional (non-point) sources (sulfide-rich shale) is evaluated by examining the mineralogy and chemistry of weathering products in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA. The elements in copper mine waste, secondary minerals, stream sediments, and waters that are most likely to have negative impacts on aquatic ecosystems are aluminum, copper, zinc, and arsenic because these elements locally exceed toxicity guidelines for surface waters or for stream sediments. Acid-mine drainage has not developed in streams draining inactive copper mines. Acid-rock drainage and chemical weathering processes that accompany debris flows or human disturbances of sulfidic rocks are comparable to processes that develop acid-mine drainage elsewhere. Despite the high rainfall in the mountain range, sheltered areas and intermittent dry spells provide local venues for development of secondary weathering products that can impact aquatic ecosystems.Electronic Supplementary Material  Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.

Jane M. HammarstromEmail: Phone: +1-703-6486165Fax: +1-703-6486252

  相似文献   

材料科学和地质学的发展及前景(英文)   总被引：1，自引：1，他引：0  

《地学前缘》2000,(2)

材料科学可定义为一门涉及化学、物理学、矿物学、地质学、冶金学和合成材料等领域的科学。“工具制造者的人类” ,主要是使用石器 ,并由此而增进了其智能的发育。燧石、石灰岩中氧化硅富集体提供了制作武器和工具的材料 ,土壤则可用于制陶业和陶瓷业。材料科学主要是由研究工业矿物演化而来 ,它与地质学的关系密切 ;合成材料以其特殊的性能满足了人们的需求。火和压力在处理天然材料的工艺发展中起着头等作用 ;金银铜铁及其它金属能用作装饰品、防御武器和制造工具。有些金属的使用显示了人类各历史时期的特点。人们后来发现某些结晶体具有特殊的性质 ,如石英的压电性、红宝石激光 ,钻石和刚玉的高硬度 (可用作磨料 ,将来仍具开发潜力 )。合成材料和在太空合成的材料具有远大前景 (如碳的同素异形体carbyne car bynoid)。在材料科学中 ,特种玻璃 ,硬而防火的陶瓷、磨料、特殊耐火材料 ,只不过是材料科学中业已开发的几种工艺矿物而已。材料科学的发展对于现代文明和解决人类当今和未来所遇到的各种问题都极其重要。与世界人口增长相关的问题 ,可以通过科学、绿色革命和生物技术 ,以及一切天然资源的合理开发来解决 ,这将有助于避免“南北对抗”。肯定地说 ,材料科学及其未来的发展 ,会有助于人类去应付  相似文献   

Facies characteristics, morphology and depositional models of clay-slide deposits in terraced fjord valleys, Norway     

Louise Hansen  Raymond S. Eilertsen  Harald Sveian 《Sedimentary Geology》2007,202(4):710-729

Many bedrock-confined fjord valleys along the Norwegian coast contain thick accumulations of fine-grained sediments that were deposited during and after the last deglaciation. The deposits gradually emerged above sea level due to glacioisostatic uplift, and fjord marine sedimentation was gradually followed by shallow marine and fluvial processes. During emergence terraces and river-cut slopes were formed in the valleys. Subsequent leaching of salt ions from the pore water in the marine deposits by groundwater has led to the development of quick clay. The deposits are subject to river erosion and destructive landslides involving quick clay. Most slides are of prehistoric age. Others are known from modern observations as well as from historic records.Landforms such as distinct slide scars or the hummocky terrain of slide deposits may be strongly modified by secondary processes. In addition, deposits from the most liquid part of quick clay slides may have planar surfaces. Clay-slide deposits on a fluvial or deltaic terrace, therefore, are not always easily recognized from morphology, and only exposures may reveal their internal structures and allow them to be distinguished from overbank flood sediments. Detailed sedimentological work shows that slide deposits in such setting consist of distinct facies containing reworked marine sediments. We propose three facies successions of clay-slide deposits that form a continuum. The dominant components of these succession types are: slightly deformed blocks of laminated clay and silt (A), highly deformed clay and silt with gravel clasts (B) and massive to stratified clay and silt with scattered clasts (C). We suggest that in many cases a basal muddy diamicton is a characteristic, and possibly diagnostic feature. Processes and depositional models are interpreted from the different succession types. The results may be relevant for identifying clay-slide deposits elsewhere and may be useful during general mapping of fjord marine deposits and characterization of slide-prone areas as well as during identification of prehistoric slides.  相似文献   

Galvanic interactions between galena–sphalerite and their reactivity     

G. Urbano  A.M. Meléndez  V.E. Reyes  M.A. Veloz  I. González 《International Journal of Mineral Processing》2007

The galvanic effect between the main associated mineralogical phases in a mineral sphalerite concentrate was evaluated using an alternative methodology. Comparative voltammetric studies were performed between high purity galena mineral (94.65%) and sphalerite concentrate (content of 78.11% sphalerite, ZnS; 13.64% galena, PbS; 0.57% chalcopyrite, CuFeS₂; 0.41% cadmium sulfide, CdS; and 0.11% arsenopyrite, FeAsS) using carbon paste electrodes (CPE) in order to identify galvanic interactions that affect their reactivity. The electrolyte was an aqueous solution of 0.1 M NaNO₃ (pH 6.5). The results showed that, in sphalerite concentrate, the electrochemical reactivity of the galena was diminished and displaced to more positive potentials with respect to the high purity galena mineral response. This behavior can be attributed to the galvanic protection offered by the sphalerite on the galena, thereby avoiding its free oxidation. On the other hand, sphalerite oxidation was diminished by the formation of a passive products film that is dissolved to more positive potentials which provokes oxidation of other minerals like CuFeS₂, (Zn,Cd)S and FeAsS present in a minor proportion in the sphalerite concentrate.  相似文献   

新疆库车凹陷侏罗系多粒级黏土矿物分析方法及其对沉积-成岩环境的指示     

吴朝东  王琪琪冯雪 顾萧 《岩石学报》2007,23(7):1655-1663

本文选取库车坳陷侏罗系阿合组—齐古组的碎屑岩样品,利用 Stokes 原理,通过同步跟进与离心分析相结合的多粒级提取的方式提取不同粒径的黏土矿物,包括>20μm;20μm～5μm;5μm～2μm;2μm～0.2μm和<0.2μm。不同粒径组分的黏土矿物呈现出不同的型貌特征,在20～2μm范围内的样品中,自生黏土矿物少见,大量可见碎屑来源的黏土矿物,由于经过了长期的机械搬运,难见完整的晶型。在<2μm的样品中大量存在自生黏土矿物,大量成集合体,同时也存在碎屑蚀变成因的黏土矿物。通过 XRD 方法定量分析了所分离出的不同粒径黏土矿物的相对含量,黏土粒径范围内的黏土矿物相对含量呈现些规律变化。碎屑伊利石含量有随着粒级的减小而减少的趋势,而自生伊利石和伊蒙混层只在2～0.2μm及0.2μm以下粒级才出现,并且集中在0.2μm以下粒级范围内;在古气候,沉积环境和母岩特性及分布基本一致的情况下,高岭石的分布有随着岩性的变粗呈现升高的趋势,而伊利石呈负相关关系。碎屑岩中黏土矿物的形貌特征表明,黏土矿物有陆源碎屑来源与自生两种成因,应用 Decoform 软件对0.2μm以下黏土矿物中不同成因的伊利石进行了计算,并就存在的比例与粒径的关系进行了讨论。黏土矿物组合揭示侏罗纪沉积环境由酸性环境向微碱性环境过渡,早侏罗世和中侏罗世早期为气候潮湿时期,高岭石的含量明显高于侏罗世晚期地层,恰克马克期到齐古期高岭石含量开始出现减小的趋势。从恰克马克期开始,气候缓慢向干旱变化,高龄石含量降低,而伊利石的平均含量明显增加,反映黏土矿物组合主要受沉积环境和成岩作用共同影响。  相似文献   

Using magnetic susceptibility to find Precambrian impact ejecta: A proposal     

Dallas Abbott  Rajat Mazumder 《Gondwana Research》2007,12(4):571-575

Layers with high magnetic susceptibility contain heavy minerals that are the most likely to preserve signatures of impact in metamorphosed Precambrian rocks. The following impact indicators are resistant to alteration and metamorphism and are likely to be found in heavy mineral layers: impact diamond, SiC, shocked zircon, high-pressure TiO₂ phases, reidite, and high-pressure chromite. Coesite and stishovite could also be present but are not likely to be preserved in rocks metamorphosed above the greenschist facies. Looking for layers with high magnetic susceptibility will also identify layers that might contain concentrations of zircon for dating.  相似文献   

Compressional behavior of clayey sand and transition fines content     

Mehmet Murat Monkul  Gurkan Ozden   《Engineering Geology》2007,89(3-4):195-205

Clayey sand can be considered as a composite matrix of coarse and fine grains. The interaction between coarser and finer grain matrices affects the overall stress–strain behavior of these soils. Intergranular void ratio, e_s (which is the void ratio of the coarser grain matrix) can be utilized as an alternative parameter to express the compressive response of such soils. Oedometer tests conducted on reconstituted kaolinite–sand mixtures indicate that initial conditions, percentage of fines, and stress conditions influence the compression characteristics evidently. Tests showed that, up to a fraction of fines, which is named as transition fines content (FC_t), compression behavior of the mixtures is mainly controlled by the sand grains. When concentration of fines exceeds FC_t, kaolinite controls the compression. It was found that FC_t varies between 19% and 34% depending on the above mentioned factors. This range of fines content is also consistent with various values reported in literature regarding the strength alteration. Performed direct shear tests revealed that there is also a close relationship between transition fines content and shear strength, which is harmonic with the oedometer test results.  相似文献   

North-south transfer zones and paleo-morphological reconstruction of the Xylokastro area (Corinth Gulf, Greece)     

Joachim Place  Yves Graud  Marc Diraison  Laurence Warr 《Tectonophysics》2007,440(1-4):121-139

A large number of studies have documented the structural and sedimentary architecture of the Corinth Gulf, especially the major E–W trending normal faults important in accommodating the main extensional strain and associated growth of the Gilbert fan deltas. However, the role of several N–S oriented structures that crop out at the surface and are detectable at depth by seismic reflection and gravity surveys are not clearly understood. Based on new geological data, collected near Xylokastro, we describe the N–S oriented tectonic activity of this area. The mapped inland faults correspond to off-shore structures identified in re-interpreted seismic lines and appear to have acted as a major transfer zone during the opening of the Corinth Gulf. Reconstruction of the paleo-topography based on sedimentary facies and the environment of clay mineral formation suggest these transfer zones played an important role in controlling both local structural relief and depositional conditions of the Gilbert fan deltas.  相似文献   

Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan   总被引：1，自引：0，他引：1  

Y. Hashimoto  K. Ujiie  A. Sakaguchi  H. Tanaka 《Tectonophysics》2007,443(3-4):233

In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites.  相似文献