Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon     

Lutz Nasdala  Wolfgang Hofmeister  Nicholas Norberg  James M. Martinson  Fernando Corfu  Wolfgang Dörr  Sandra L. Kamo  Allen K. Kennedy  Andreas Kronz  Peter W. Reiners  Dirk Frei  Jan Kosler  Yusheng Wan  Jens Götze  Tobias Häger  Alfred Kröner  John W. Valley 《Geostandards and Geoanalytical Research》2008,32(3):247-265

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.  相似文献   

Recommended Values of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry     

Taeko Shinonaga  Helmuth Aigner  Dilani Klose  Peter Spinder  Heinz Fröschl  David Donohue 《Geostandards and Geoanalytical Research》2008,32(1):93-101

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.  相似文献   

膜分离技术的应用及发展趋势   总被引：8，自引：0，他引：8  

岳志新  马东祝  赵丽娜  赵寒梅 《云南地理环境研究》2006,18(5):52-57

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。  相似文献   

Determination of total selenium in geological samples by HG-AFS？ After enrichment with thiol cotton fiber     

《中国地球化学学报》2006,25(B08):208-209

  相似文献   

Compressibility and swelling characteristics of Al-Khobar Palygorskite, eastern Saudi Arabia   总被引：1，自引：0，他引：1  

Saad A. Aiban   《Engineering Geology》2006,87(3-4):205-219

Expansive soils are found in different locations in eastern Saudi Arabia. The area is arid with high temperatures, highly variable humidity and an excessive rate of evaporation compared to the low precipitation. This resulted in the formation of water sensitive soils. In the present investigation, line valve buildings for a sweet water feeder (1118 mm in diameter) were constructed on a highly expansive material consisting mainly of brown palygorskite and gray palygorskite with thin sheets of gypsum and limestone. Block samples from both palygorskites were brought to the laboratory and cores as well as remolded samples were obtained from the blocks. The two palygorskites were found to be highly plastic and have a very high swelling potential. The liquid limit (LL) and plastic limit (PL) values for the brown palygorskite are 261% and 140%, respectively. The gray palygorskite has a LL of a 285% and a PL of 123%. The oedometer free swell tests for the two palygorskites produced an expansion ranging between 31.8% and 42.5% for the remolded samples. However, the expansion for cores ranges between 8.3% and 19.3%. The constant volume pressure tests produced a stress in excess of 4240 kPa. The swell potential reached a steady state after four days while the swelling pressure reached a steady state in about 3 h. The paper addresses the geology of the area, the characterization of the geomaterial including mineralogical composition using X-ray diffraction and SEM techniques and the swelling characteristics of the material.  相似文献   

环境矿物材料治理镉（Cd^2＋）污染研究进展   总被引：4，自引：0，他引：4  

商平  王丽娜 《岩石矿物学杂志》2005,24(6):681-685

近年来,环境矿物材料以其经济、有效、无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多优势,可替代传统的镉污染处理方法。本文综述了国内外环境矿物材料在处理镉污染方面的研究进展,并对今后应用环境矿物材料治理镉污染提出了一些建议。  相似文献   

河南省平顶山盐田盐矿床成矿特征探讨     

姜敏德  沈佩霞 《中国煤田地质》2005,17(4):12-14

以现有钻孔及区域资料为基础，对平顶山盐田盐矿床形成的构造条件和盐湖的沉积模式、沉积类型成矿物源进行了分析，为平顶山盐田的进一步勘查和开发提供了宝贵资料。  相似文献   

原料收购信息管理系统的设计与实现     

郑国宏  张春雷 《沙漠与绿洲气象(新疆气象)》2005,28(1):26-27

利用数据库相关知识对原料收购业务进行合理的规划、分析与设计，充分利用计算机处理、网络通讯技术，将电子衡与微机系统相连，利用RS232通讯标准将称重数据读入微机，并及时处理、结算、统计、查询、输出，建立一套完整的网络化数据库管理系统。目的是解决原料过磅手工记帐的传统方式，以便快速准确完成原料收购业务，从而达到节约劳动力、提高工作效率的目的。  相似文献   

Soluble organic compounds in fog and cloud droplets: what have we learned over the past few years?     

Sandro Fuzzi  Maria Cristina Facchini  Stefano Decesari  Emanuela Matta  Mihaiela Mircea 《Atmospheric Research》2002,64(1-4)

We have recently set up a new procedure for characterising the water soluble organic compounds (WSOC) in fog water, for which information is still rather limited. Fog samples collected during the 1998–1999 fall–winter season in the Po Valley (Italy) were analysed following this procedure, which allows a quantitative determination of three main classes of organic compounds (neutral species, mono- and di-carboxylic acids, polycarboxylic acids), together accounting for ca. 85% of the total WSOC. This procedure also provides information on the main chemical characteristics of these three classes of compounds (functional groups, aliphatic vs. aromatic character, etc.). The enhanced chemical knowledge on fog/cloud chemical composition opens new scenarios as far as chemical and microphysical processes in clouds and fogs are concerned.  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献