Characterization of hydrogeologic properties for a multi-layered alluvial aquifer using hydraulic and tracer tests and electrical resistivity survey     

Jeong-Woo Kim  Heechul Choi  Jin-Yong Lee 《Environmental Geology》2005,48(8):991-1001

A multi-layered aquifer, typical of riverbank alluvial deposits in Korea, was studied to determine the hydrologic properties. The geologic logging showed that the subsurface of the study site was comprised of four distinctive hydrogeologic units: silt, sand, highly weathered and fresh bedrock layers. The electrical resistivity survey supplied information on lateral extension of hydrogeologic strata only partially identified by a limited number of the geologic loggings. The laboratory column tracer test for the recovered core of the sand layer resulted in a hydraulic conductivity of 5.00×10⁻² cm/s. The slug tests performed in the weathered rock layer yielded hydraulic conductivities of 4.32–7.72×10⁻⁴ cm/s. Hydraulic conductivities for the sand layer calculated from the breakthrough curves of bromide ranged between 2.08×10⁻³ and 2.44×10⁻² cm/s with a geometric mean of 6.89×10⁻³ cm/s, which is 7 times smaller than that from the laboratory column experiment. The trend of increasing hydraulic conductivity with an increase in tracer travel length is likely a result of the increased likelihood of encountering a high conductivity zone as more of the aquifer is tested. The combined hydrogeologic site characterization using hydraulic tests, tracer tests, and column test with geologic loggings and geophysical survey greatly enhanced the understanding of the hydrologic properties of the multi-layered alluvial aquifer.  相似文献   

Under stress permeability determination of the Meuse/Haute-Marne mudstone     

S. Escoffier  F. Homand  N. Hoteit 《Engineering Geology》2005,81(3):329-340

In the underground waste isolation projects such as the ANDRA'one in the site of Bure, the transport properties of the surrounding rock mass is of fundamental importance. To measure very low permeability, we use the modified version of the pulse test proposed by Hsieh et al. [Hsieh, P.A., Tracy, J.V., Neuzil, C.E., Bredehoeft, J.D., Silliman, S.E., 1981. A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks — I. Theory. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Vol. 18, pp. 245-252] which enables the intrinsic permeability, k, and the specific storage coefficient, S_s, of rocks such as mudstone to be characterized. In this paper, the special effort performed on the laboratory apparatus design, to ensure a good sensitivity of the rock response with respect to both parameters, k and S_s, is presented. In addition, two parameters identification procedures are proposed: the graphical method given by Hsieh et al. [Hsieh, P.A., Tracy, J.V., Neuzil, C.E., Bredehoeft, J.D., Silliman, S.E., 1981. A transient laboratory method for determining the hydraulic properties of ‘tight’ rocks — I. Theory. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Vol. 18, pp. 245-252] and a parameter identification based on the solution of an inverse problem. The efficiency of the apparatus design and the parameters identification procedures is then demonstrated though some pulse tests performed on the Meuse/Haute-Marne mudstone.  相似文献   

An approach to model the mechanical behavior of transversely isotropic materials          下载免费PDF全文

M. Mahjoub  A. Rouabhi  M. Tijani  S. Granet 《国际地质力学数值与分析法杂志》2016,40(6):942-961

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

济南东部大辛河渗漏段地下水示踪试验与分析          下载免费PDF全文

丁冠涛  刘玉仙  曹光明  齐欢 《山东国土资源》2018,34(2)

2013年以来,济南市为正确处理好保泉和市民饮用优质地下水的关系,组织实施了地表水转换地下水补源系列工程,旨在补源保泉的前提下开采地下水。大辛河地表水转地下水工程是其中重要的组成部分,为了查明大辛河渗漏补源后地下水的补给方向、径流速度等,在大辛河主要渗漏段开展了地下水示踪试验。结果显示:地下水渗漏补源后沿渗漏段—龙奥大厦—济南东区供水奥体加压站—贤文小区一线大体自南向北径流,视径流速度约45m/d,越往两侧流速越缓慢,表明大辛河地表水转地下水工程主要对东郊水源地进行补给,对市区四大泉群补给较弱。示踪试验得出的结论,对大辛河地表水转地下水工程运行具有重要指导作用,对后期管理部门合理规划补源、开采布局具有重要的借鉴意义,促进济南保泉和供水的有机统一。  相似文献   

适用于快速远程检测海水中氰化物的方法研究     

姚竞芳  袁涛  敖俊杰  顾佳媛  李佳凡 《海洋科学》2018,42(11):24-28

建立了一种适用于海洋远程快速检测氰化物的检测方法,设计了一体化检测装置,未来可搭载到无人艇上实现自动快速检测。针对最佳检测条件进行了一系列优化,得到最佳检测条件:对于100 mL的待测样品,加入酒石酸固体1.5 g;用1～2滴浓度为150 g/L的碳酸钠溶液浸润苦味酸试纸;加热温度80℃,加热时间10min。在最佳检测条件下,检测检出限达0.3mg/L。该方法实现了适用于海水氰化钠的远程检测,大大提高了检测效率,无需人员进入污染现场,安全性高。可广泛用于海洋危化品泄漏、湖泊污染、现场应急筛选等场合的水体样品快速检测。  相似文献   

New graphical methods for estimating aquifer hydraulic parameters using pumping tests with exponentially decreasing rates     

Chao Zhuang  Zhifang Zhou  Hongbin Zhan  Jinguo Wang  Yabing Li  Zhi Dou 《水文研究》2019,33(17):2314-2322

Actual pumping tests may involve continuously decreasing rates over a certain period of time, and the hydraulic conductivity (K) and specific storage (S_s) of the tested confined aquifer cannot be interpreted from the classical constant‐rate test model. In this study, we revisit the aquifer drawdown characteristics of a pumping test with an exponentially decreasing rate using the dimensionless analytical solution for such a variable‐rate model. The drawdown may decrease with time for a short period of time at intermediate pumping times for such pumping tests. A larger ratio of initial to final pumping rate and a smaller radial distance of the observation well will enhance the decreasing feature. A larger decay constant results in an earlier decrease, but it weakens the extent of such a decrease. Based on the proposed dimensionless transformation, we have proposed two graphical methods for estimating K and S_s of the tested aquifer. The first is a new type curve method that does not employ the well function as commonly done in standard type curve analysis. Another is a new analytic method that takes advantage of the decreasing features of aquifer drawdown during the intermediate pumping stage. We have demonstrated the applicability and robustness of the two new graphical methods for aquifer characterization through a synthetic pumping test.  相似文献   

枣庄市台儿庄区小龚庄岩溶地下水水源地允许开采量计算评价          下载免费PDF全文

丁冠涛  刘玉仙  高帅 《山东国土资源》2019,35(3)

科学有效的地下水资源评价是可持续开发地下水资源的关键,其中地下水资源可开采量的评价是地下水资源评价的核心内容。该文在对枣庄市台儿庄区小龚庄水源地水文地质条件、岩溶塌陷发育情况等进行详细分析的基础上,采用开采试验法对小龚庄水源地岩溶地下水允许开采量进行了计算,计算结果为11354m~3/d。根据已发生岩溶塌陷情况,设定岩溶塌陷预警水位,利用非稳定流Theis公式计算了安全开采量范围在11187～13150m~3/d之间,对开采试验法计算结果进一步进行评价。根据评价结果最终确定以11354m~3/d作为小龚庄水源地的允许开采量是可靠的,可以保证水源地最大限度的开采地下水资源,同时又保证水源地运行时不易引发岩溶塌陷的环境地质问题。该方法为同类型水源地地下水允许开采量的计算评价提供了一定的借鉴。  相似文献   

An original semi‐discrete approach to assess gas conductivity of concrete structures          下载免费PDF全文

M. Ezzedine El Dandachy  M. Briffaut  F. Dufour  S. Dal Pont 《国际地质力学数值与分析法杂志》2017,41(6):940-956

For civil engineering structures with a tightness role, structural permeability is a key issue. In this context, this paper presents a new proposition of a numerical modelling of leakage rate through a cracked concrete structure undergoing mode I cracking. The mechanical state of the material, considered in the framework of continuum mechanics based on finite element modelling, is described by means of the stress‐based nonlocal damage model which takes into account the stress state and provides realistic local mechanical fields. A semi‐discrete method based on the strong discontinuity approach to estimate crack opening is then considered in the post‐treatment phase. Using a Poiseuille's like relation, the coupling between the mechanical state of the material and its dry gas conductivity is performed. For validation purposes, an original experimental campaign is conducted on a dry concrete disc loaded in a splitting setup. During the loading, gas conductivity and digital image correlation analysis are performed. The comparison with the 3D experimental mechanical global response highlights the performance of the mechanical model. The comparison between crack openings measured by digital image correlation and estimated by the strong discontinuity method shows a good agreement. Finally, the results of the semi‐discrete approach coupled with the gas conductivity compared with experimental data show a good estimation of the structural conductivity. Consequently, if the mechanical problem is well modelled at the global scale, then the proposed approach provides good estimation of gas conductivity. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

L1范数与IQR统计量组合的GNSS坐标序列粗差探测算法     

明锋  曾安敏  景一帆 《测绘科学技术学报》2016,(2):127-132

GNSS坐标时间序列中不可避免地含有粗差,未剔除的粗差将会导致参数估计有偏。因此,粗差探测与剔除是GNSS坐标序列分析中一项重要的数据预处理工作。针对GNSS坐标时间序列特点,提出了一种将L1范数(L1-norm)估计与四分位距统计量IQR(interquartile range)组合的移动开窗粗差探测算法,称之为L1_Mod IQR。该方法的主要思想是,首先利用L1范数估计得到较"真实"的残差,然后再对残差采用IQR统计量进行粗差探测。将L1_Mod IQR法与"3σ"法、基于最小二乘的τ检验法等粗差探测算法进行了模拟计算与对比,验证了该算法的有效性。进一步采用L1_Mod IQR算法对中国区域10个IGS站的高程时间序列进行了分析,结果表明中国区域IGS站高程序列的粗差剔除率最小为0.1%,最大为2.6%。并且以WUHN站为例与SOPAC提供的结果进行了对比,结果表明SOPAC提供的"Clean"数据仍含有大量的粗差,而L1_Mod IQR算法能够有效地剔除粗差。  相似文献   

Provenance of Holocene beach sand in the Western Iberian margin: the use of the Kolmogorov–Smirnov test for the deciphering of sediment recycling in a modern coastal system          下载免费PDF全文

Manuel Francisco Pereira  Luís Albardeiro  Cristina Gama  Martim Chichorro  Mandy Hofmann  Ulf Linnemann 《Sedimentology》2016,63(5):1149-1167

Detrital zircons from Holocene beach sand and igneous zircons from the Cretaceous syenite forming Cape Sines (Western Iberian margin) were dated using laser ablation – inductively coupled plasma – mass spectrometry. The U–Pb ages obtained were used for comparison with previous radiometric data from Carboniferous greywacke, Pliocene–Pleistocene sand and Cretaceous syenite forming the sea cliff at Cape Sines and the contiguous coast. New U–Pb dating of igneous morphologically simple and complex zircons from the syenite of the Sines pluton suggests that the history of zircon crystallization was more extensive (ca 87 to 74 Ma), in contrast to the findings of previous geochronology studies (ca 76 to 74 Ma). The U–Pb ages obtained in Holocene sand revealed a wide interval, ranging from the Cretaceous to the Archean, with predominance of Cretaceous (37%), Palaeozoic (35%) and Neoproterozoic (19%) detrital‐zircon ages. The paucity of round to sub‐rounded grains seems to indicate a short transportation history for most of the Cretaceous zircons (ca 95 to 73 Ma) which are more abundant in the beach sand that was sampled south of Cape Sines. Comparative analysis using the Kolmogorov–Smirnov statistical method, analysing sub‐populations separately, suggests that the zircon populations of the Carboniferous and Cretaceous rocks forming the sea cliff were reproduced faithfully in Quaternary sand, indicating sediment recycling. The similarity of the pre‐Cretaceous ages (>ca 280 Ma) of detrital zircons found in Holocene sand, as compared with Carboniferous greywacke and Pliocene–Pleistocene sand, provides support for the hypothesis that detritus was reworked into the beach from older sedimentary rocks exposed along the sea cliff. The largest percentage of Cretaceous zircons (<ca 95 Ma) found in Holocene sand, as compared with Pliocene–Pleistocene sand (secondary recycled source), suggests that the Sines pluton was the one of the primary sources that became progressively more exposed to erosion during Quaternary uplift. This work highlights the application of the Kolmogorov–Smirnov method in comparison of zircon age populations used to identify provenance and sediment recycling in modern and ancient detrital sedimentary sequences.  相似文献