Verteilung und Wanderung von Neunaugen im Elbeästuar (Deutschland)     

Ralf Thiel  Volker Salewski 《Limnologica》2003,33(3):214-226

From March 1989 until May 1995 overall 675 hauls were performed using a commercial stow net vessel to get information concerning spatial and seasonal distribution, length frequency distribution, stock situation and migration patterns of lampreys in the Elbe estuary in northern Germany.2217 river lampreys (Lampetra fluviatilis) and 10 sea lampreys (Petromyzon marinus) were caught during the whole study period. The river lamprey occurred in 40.3% of the performed stow net hauls. The catch success was highest in the western main channel, whereas the frequency of occurrence of river lampreys was only about 10.9% at the most upstream site in the southern marginal area. In 1989 and 1990 significantly more than 50% of the hauls contained river lampreys. In contrast, from 1991 to 1995 their frequency of occurrence was lower than 40%, in 1991 even lower than 20%. Sea lampreys occurred only at 6 from 9 sampled sites and were only observed in 1990 and 1992-1994.Total lengths of river lampreys varied between 7 and 46 cm. Based on the length frequency distribution, the following three size classes of river lampreys were separated: LF I (7 to 16 cm), LF II (17-26 cm) and LF III (27-46 cm). The majority of the caught individuals could be grouped in size class LF III. Total lengths of sea lampreys ranged between 69 and 85 cm and were restricted to only one size class (PM III).70% of all sea lampreys were caught in April and May. Most of the sea lampreys were observed in the eastern main channel. The maximum average abundance of river lampreys was observed with 6.75 Ind · m⁻³ · 10⁻⁶ in the same area in 1992. However, in 1993 and 1994 the highest average abundances of river lampreys occurred in the western main channel.Based on redundance analysis, a significant correlation between the abundances of lampreys and the environmental variables autumn, spring, summer, salinity, water temperature, grain size, new moon and first moon quarter was found. The downstream migrating river lampreys of size class LF I und the sea lampreys during their anadromous spawning migration showed highest abundances mainly in spring, whereas high abundances of river lampreys of size class LF II in the feeding phase occurred in summer. The presence of both size classes LF I and LF II confirms the successful reproduction of river lampreys in the catchment area of the Elbe. The observation of river lampreys of size class LF III during their anadromous spawning migration was closely correlated with the variable autumn. A spring spawning migration of river lampreys was not observed.  相似文献   

从激光扫描数据中进行建筑物特征提取研究   总被引：42，自引：4，他引：42  

李必军  方志祥  任娟 《武汉大学学报(信息科学版)》2003,28(1):65-70

提出了一套基于建筑物几何特征的信息挖掘方案，并具体介绍了研究中采用的一些原理、方法与实用算法，从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理，并给出了三维建模和可视化表达结果。  相似文献   

从卫星遥感全色图像中自动提取城市目标   总被引：11，自引：0，他引：11  

文贡坚  李德仁  叶芬 《武汉大学学报(信息科学版)》2003,28(2):212-218

提出了一种从卫星遥感全色图像中自动提取城市目标的方法。在总结城市目标的卫星遥感全色图像特性的基础上 ,设计了一种层次提取的方法。首先在低分辨率图像中提取城市目标的候选区域 ;接着在候选区域内利用城市目标一些更复杂的特性在高分辨率图像中证实城市目标。为了获得城市目标的边界 ,提出了一种基于边缘点密度的算法 ,并将算法应用去提取SPOT图像中的城市目标 ,取得了较好的试验结果  相似文献   

煤田火区烧变岩光谱特征分析及其信息提取   总被引：1，自引：0，他引：1  

祝善友  韩作振  张光超 《国土资源遥感》2003,14(2):55-58

中国北方煤田煤层自燃现象非常严重.利用遥感手段可以快速实现火区的动态监测,及时为灭火工程提供信息.烧变岩作为火区的地表指示性特征,是火区解译最直观的信息.本文从烧变岩的反射光谱曲线特征入手,对几种提取烧变岩信息的方法进行比较,从而确定解译烧变岩的最佳方法,为圈定火区的范围和位置奠定基础.  相似文献   

3G技术与现代物流管理技术的集成模式研究   总被引：3，自引：1，他引：3  

霍亮  李欣 《测绘科学》2003,28(3):59-61

3G技术能够对现代物流作业与管理进行有效地监督和控制,3G技术与现代物流管理技术的集成是物流业发展的客观需要。探讨了3G技术与现代物流管理技术的集成模式,对于以GIS技术为平台支撑、以定位技术和无线通信技术为辅助手段的分布式空间物流信息系统的建设具有一定的意义。  相似文献   

高职GIS专业实践教学及实践基地建设     

张立  陈波 《现代测绘》2003,26(6):45-46

高职教育是GIS人才培养的重要组成部分。本文通过介绍职教GIS专业的建设，探索GIS实践教学与实践基地建设模式、方法及对人才培养的影响。  相似文献   

时频测控技术的发展   总被引：11，自引：1，他引：11  

周渭  王海 《时间频率学报》2003,26(2):87-95

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。  相似文献   

The response of subaqueous dunes to floods in sand and gravel bed reaches of the Dutch Rhine   总被引：4，自引：0，他引：4  

A.W.E. Wilbers  W.B.M. Ten Brinke† 《Sedimentology》2003,50(6):1013-1034

Abstract The branches of the River Rhine in the Netherlands, characterized by a sand–gravel bed in the upstream part and a sand bed in the downstream part of the river system, show migrating dunes, especially during floods. In the last 20 years, these dunes have been studied extensively. High-resolution echo-sounding measurements of these dunes, made with single and multibeam equipment, were analysed for three different sections of the Rhine river system during several floods. This analysis was done to quantify the growth, decay and migration rates of the dunes during floods. In addition, the migrating dunes were used to calculate bedload transport rates with dune tracking. The results of dune growth and decay and migration rate are shown to be very different for the various sections during the various floods, and these differences are related to differences in grain size of the bed and to differences in the distribution of discharge over the main channel and the floodplain. The relations are used to show that the growth and migration rate of dunes, and the calculated bedload transport rates during the rising stage of a flood wave can be predicted from the mobility of the bed material with simple power relations.  相似文献   

Determination of Halogens (F, Cl, Br, I), Sulfur and Water in Seventeen Geological Reference Materials   总被引：5，自引：0，他引：5  

Agnès Michel  Benoît Villemant 《Geostandards and Geoanalytical Research》2003,27(2):163-171

Fluorine, chlorine, bromine, iodine and sulfur were determined in seventeen geological reference materials after extraction by pyrohydrolysis. Fluorine, Cl and S (as sulfate ions) were determined in the extraction solution by ion chromatography with detection limits of around 0.2 mg l⁻¹. Bromine and I were measured by ICP-MS with detection limits of 1 μg l⁻¹ for Br and 0.1 μg l⁻¹ for I. For rock samples, using normal extraction conditions (500 mg of sample and 100 ml of final solution) detection limits were 40 mg kg⁻¹ for F and Cl, 15 mg kg⁻¹ for S, 0.2 mg kg⁻¹ for Br and 0.02 mg kg⁻¹ for I. These detection limits may be improved by increasing the amount of sample and hence the concentration of the final solution. Water was also determined using an extraction technique based on H₂O degassing, reduction on zinc at 1000 °C and H₂ manometry. Our results for fluorine, chlorine, sulfur and water are in good agreement with literature data. Very few reference materials have recommended values for bromine and especially for iodine. Among the analysed samples, three are new reference materials: BHVO-2, BCR-2 and AGV-2.  相似文献   

A mathematical model of concentrate solids content for the wet drum magnetic separator     

John G. Rayner  T. J. Napier-Munn   《International Journal of Mineral Processing》2003,70(1-4):53-65

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.  相似文献