江南造山带黄金洞金矿床成矿机制:矿物形成环境与金成矿物理化学条件制约   总被引：4，自引：4，他引：0  

孙思辰  张良  吴圣刚  高磊  彭劲松  文亭 《岩石学报》2018,34(5):1469-1483

黄金洞超大型金矿床位于江南造山带中段,赋存于新元古界浅变质岩系中,受控于NNE-NE向长平断裂带,金资源储量达100吨。该矿床可由南至北分为金福、金塘、杨山庄和曲溪矿段,主要矿化类型有石英-硫化物脉型、构造角砾岩型和黄铁毒砂绢英岩型。金属矿物主要发育有自然金、毒砂、黄铁矿、黄铜矿、闪锌矿、方铅矿、磁黄铁矿等;非金属矿物有石英、绢云母、方解石和菱铁矿等,其中金主要以自然金与不可见金形式存在。根据野外与镜下观察,金成矿作用分为Ⅰ石英-金-毒砂-黄铁矿、Ⅱ石英-金-多金属硫化物-白钨矿和Ⅲ石英-辉锑矿-绿泥石3个阶段,前二者为主要成矿阶段。曲溪矿段Ⅱ阶段毒砂相对不发育、而磁黄铁矿和自然金显著发育,绿泥石主要发育于Ⅲ阶段中,与辉锑矿及闪锌矿共生。根据不同矿段各阶段毒砂与Ⅲ阶段绿泥石成分,计算其温度、lgf(S_2)与lgf(O_2),可见Ⅰ阶段成矿温度与硫逸度高于Ⅱ阶段:杨山庄矿段两阶段成矿温度分别为300～378℃、260～300℃,lgf(S_2)分别为-11～-7.2、-11.9～-10.1;金塘两阶段成矿温度为240～311℃、245～298℃;金福Ⅱ阶段成矿温度上限为297℃;曲溪矿段成矿温度为268～368℃,Ⅱ阶段毒砂lgf(S_2)与Ⅲ阶段绿泥石lgf(O_2)分别为-13.2～-8.7、-50.9～-40.1。根据不同阶段矿物之间的相互关系及成矿温度与硫逸度演化特征,推断Ⅰ、Ⅱ成矿阶段伴随强烈的硫化作用,金以类质同象方式进入毒砂和黄铁矿中,形成不可见金;其中Ⅱ阶段由于成矿流体压力骤降,含金流体发生相分离作用,H2S等气体大量逃逸,导致成矿流体中硫含量骤降,加以硫化作用持续消耗流体中的硫,促进了含金络合物分解与自然金的沉淀。  相似文献   

高寒冻土区生物结皮对土壤理化属性的影响   总被引：1，自引：0，他引：1  

明姣  盛煜  金会军  张泽  杜玉霞 《冰川冻土》2021,43(2):601-609

生物结皮是高寒地区地被层的重要组分之一。其作为地表特殊的结构层,能够改变地表结构及土壤理化属性,从而影响冻土环境。迄今为止,关于青藏高原高寒生态系统中生物结皮对土壤理化属性的影响尚不清楚。以青藏高原高寒冻土区生物结皮为研究对象,初步研究了生物结皮的特征及其对土壤理化属性的影响。结果表明：生物结皮在高寒草甸退化过程中广泛发育,主要以藻结皮为主,其盖度可达37.3%~51.7%,结皮层平均厚度为12.6 mm。由于生物结皮的发育,高寒地区5~20 cm土层粉粒含量有所增加,但差异不显著,而结皮层土壤田间持水量相比于裸地表层（2 cm）增加了10%~40%,结皮层容重较裸地降低了30%;两种类型藻结皮均显著增加了结皮层及其下0~20 cm土层土壤有机质,而深色藻结皮增加了结皮层及其下0~20 cm土层土壤全氮含量,浅色藻结皮仅增加了结皮层土壤全氮含量,对其下0~20 cm土层土壤全氮含量没有显著影响;生物结皮对土壤pH没有显著影响;生物结皮是高寒生态系统植被退化过程中的关键环节。研究结果为揭示生物结皮在高寒生态系统中发挥重要生态功能提供依据。  相似文献   

冻土机械切削破碎机理的研究进展   总被引：1，自引：1，他引：0  

李龙  周琴  张凯  凌雪  张在兴  李耀 《冰川冻土》2021,43(2):638-649

冻土开挖困难、破碎效率低是高寒地区工程建设、地基施工等面临的技术难题。冻土机械切削破碎是冻土开挖的主要方法,其机理研究是提高冻土破碎效率的前提和基础。首先总结了温度、含水率、围压等对冻土复杂力学特性的影响,进而调研分析了冻土机械切削破碎的典型切削力学模型,发现冻土切削机械破碎模式不仅与冻土力学特性密切相关,也与切削参数和刀具结构直接相关,冻土切削过程中存在着最优的切削前角（30°~60°）,且深切削和浅切削时冻土内部受力方式存在差异也会导致破坏形式的不同;温度、含水率、围压所造成的冻土力学性能变化会直接导致冻土破坏过程和切削破碎机理的改变,冻土强度随着温度降低表现出先升高然后保持稳定的特性,随着含水率升高呈现出先升高后降低的趋势,冻土破碎存在脆性、塑脆过渡及塑性等不同破坏形式。通过系统总结冻土切削破碎机理研究进展,进一步明确了冻土力学性质主要影响因素、变化特点及其切削破坏损伤特征,为冻土机械切削破碎的切削参数和切削具结构优化提供了设计依据。  相似文献   

不同初始饱和度红砂岩冻融后物理力学性质研究          下载免费PDF全文

沈世伟  吴飞  甘霖  姜满 《探矿工程》2021,48(1):120-128

对不同初始饱和度红砂岩冻融循环前后进行物理及力学试验研究,探讨初始饱和度对红砂岩冻融损伤的影响。本文设定红砂岩试样初始饱和度为20%、40%、60%、80%、100%,冻融次数设定为20次,对冻融前后试样分别测定质量、纵波波速以及进行单轴压缩试验。试验结果表明：1）冻融后不同初始饱和度红砂岩的物理性质发生变化,纵波波速降低、质量减小,但变化程度不同;2）随饱和度的增大,试样经冻融后峰值强度和弹性模量均呈降低趋势,但只有饱和度大于60%时,降低趋势较明显。本文研究为寒区隧道及地下工程建设以及岩土地质灾害监测与治理提供理论依据和试验基础。  相似文献   

Quantitative characterization of different coal rank reservoirs permeability based on NMR and X-CT technology     

GUO Guangshang  XING Liren  LI Hao 《中国地质调查》2021,7(6):103-108

With the increasing development of coalbed methane (CBM) field, the quantitative characterization and evaluation of coal reservoir physical properties is becoming more and more important to CBM scale development. In order to solve the limitations of conventional methods for testing coal reservoir physical properties, the authors used the high-tech technologies such as nuclear magnetic resonance technology and CT scanning technology to effectively solve the problems of in-situ and integrity of rock samples and acquire the porosity and permeability. Nuclear magnetic resonance and CT scanning experiments of coal samples were carried out to rapidly obtain the pore type, pore size distribution and connectivity, effective porosity, spatial distribution of pore fissures and other refined coal reservoir physical parameters, based on the samples of middle and low rank coal in Shenfu block and high rank coal in Shizhuangnan block. So a set of quantitative characterization analysis technology that can be applied to coal reservoirs with different coal rank was formed.  相似文献   

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review     

《China Geology》2021,4(4):686-719

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.  相似文献   

2010—2016年江西省暖季短时强降水特征分析   总被引：2，自引：0，他引：2  

付超  谌芸  朱克云  单九生  曾智琳 《气象》2019,45(9):1238-1247

利用江西省2010—2016年5—9月1597个观测站逐小时降水资料对江西省短时强降水进行统计分析。采用REOF将降水场划分为5个区域：赣北南部（Ⅰ区）,抚州市及赣州中部（Ⅱ区）,赣北北部（Ⅲ区）,赣南南部、北部（Ⅳ区）以及赣中西部（Ⅴ区）。短时强降水高频区主要分布在山地及河谷附近,分别为湘赣交界罗霄山脉东侧、武夷山西侧、信江河谷、乐安河谷和昌江河谷。河谷附近短时强降水频次以昌江河谷最高（16.9次/a）,山地附近最高在罗霄山脉东侧（12.6次/a）,极端短时强降水分别位于上饶市东北部山区（3.7次/a）及九岭山南侧的锦江河谷（3.3次/a）。短时强降水主要发生在5月第3候,6、7月第3~4候以及8月第2~3候。Ⅳ、Ⅴ区具有单峰型的日变化特征;Ⅰ、Ⅱ、Ⅲ区具有双峰型的日变化特征。主峰基本集中在下午17时;次峰在上午08—10时。短时强降水对暴雨贡献率基本在40%以上,Ⅰ、Ⅱ区的暴雨天气过程将近一半是由短时强降水贡献的。信江河谷是暴雨雨量中心,但并不是短时强降水雨量中心;昌江河谷与武夷山西麓既是暴雨中心也是短时强降水中心。  相似文献   

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials          下载免费PDF全文

W. Q. Shen  J.‐F. Shao  D. Kondo 《国际地质力学数值与分析法杂志》2017,41(13):1453-1473

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models          下载免费PDF全文

Peihuo Peng  Yang Ju  Yongliang Wang  Shaoqin Wang  Feng Gao 《国际地质力学数值与分析法杂志》2017,41(18):1992-2013

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.  相似文献   

Ecological classification of European transitional waters in the North-East Atlantic eco-region     

Cristina Galván  José Antonio Juanes  Araceli Puente 《Estuarine, Coastal and Shelf Science》2010

A new methodology to classify European North-East Atlantic transitional waters into ecological types has been developed based on the most important hydrological and morphological features that are likely to determine the ecology of aquatic systems in transitional waters. Hydrological indicators help identifying if a transitional water area is dominated by fresh or sea water and/or by intertidal or subtidal areas, while morphological indicators allow an estimation of the complexity of the transitional water and the diversity of the habitats involved. Twelve transitional waters of the southern Bay of Biscay were classified using this methodology and the five hydro-morphological types obtained were validated with benthic macro-invertebrate data. Transitional waters with a complex morphology showed the highest values of species diversity, while those with a smaller tidal influence showed lower species diversity. The ‘Scrobicularia’ and ‘Abra’ assemblages, previously identified in the study area, were found to be related to different types of transitional waters. The ‘Abra’ assemblage only appeared in estuaries with a complex morphology and dominated by tidal influences, while the ‘Scrobicularia’ assemblage was detected in all the transitional waters except for a single coastal lagoon. This classification of transitional waters may therefore be useful to establish the biological reference conditions needed for European Directives.  相似文献