变形分析的Bayes估计与检验     

寇新建 《大地测量与地球动力学》1994,(3)

由于观测条件的变化，观测值方差将产生随机波动。本文根据Ｂａｙｅｓ估计理论，推导了线性模型待估参数的分布函数及观测值方差估计公式，并将其用于位移检验。计算结果表明，在同样的置信度下，本方法更符合实际。文中还对参数估值的统计性质进行了讨论。  相似文献   

长江三峡工程地壳形变监测网络   总被引：19，自引：10，他引：9  

邢灿飞  龚凯虹  杜瑞林 《大地测量与地球动力学》2003,23(1):114-118

长江三峡工程地壳形变监测网络，采用了当今高精度GPS、INSAR空间大地测量技术，并与精密水准测量，精密重力测量，精密激光测距和峒体连续形变监测等技术相结合，构成一个空间上点、线、面结合，时间上长、中、短兼顾的高精度，高时空分辨率的地壳形变监测网络。该网络既可获取三峡库区特别是库首区区域形变场和区域应变场的动态变化，监测库区主要断层活动，为水库诱发地震预测及研究服务，又可用于气象、滑坡地质灾害监测等，该监测网络于1997年底开始建设，2001年6月建成，到目前为止，已获得大量宝贵的观测资料，必将产生显著的经济效益和社会效益。  相似文献   

三峡地区地形变监测与区域地壳稳定性分析     

张众服 《大地测量与地球动力学》1996,(4)

利用三峡地区多年的地形变观测资料，分析了该区的地形变特征。结果表明，各断层活动性甚微或基本不活动，区域地壳相对稳定  相似文献   

利用地震矩张量反演鲜水河断裂带现今运动学特征     

孙建中  施顺英  周硕愚  张爱华 《大地测量与地球动力学》1994,(4)

本文探讨了利用地震矩反演断裂形变带运动学参数的基本理论和方法，将其初步应用于鲜水河断裂形变带变形分析和运动机制的研究。结果表明，鲜水河断裂带呈现出走向拉伸、倾向压缩的形变格局，由地震矩反演的断裂带剪切形变速率（１０．９ｍｍ／ａ）与用地质学估算方法（１７ｍｍ／ａ）和现今地壳形变测量（８ｍｍ／ａ）的结果相当。同时，反演出的应变主方向能解释鲜水河断裂现今活动分段性特征以及多种滑动方式共存的现状，从而证明该方法是目前研究区域运动学问题切实有效的手段之一。  相似文献   

宁夏香山-天景山弧形断裂带新活动特征及1709年中卫南71/2级地震形变带   总被引：5，自引：1，他引：4       下载免费PDF全文

张维岐  焦德成  柴炽章  宋方敏  汪一鹏 《地震地质》1988,10(3):12

本文根据野外地质填图和水系位移测量结果,论述了香山-天景山弧形断裂带新生代有两个不同活动性质的阶段,即早期阶段的强烈挤压和晚期阶段的左旋走滑兼挤压。分析、讨论了不同活动阶段的时间界限和转变原因。指出了1709年中卫南71/_2级地震形变带的表现形式、延伸范围  相似文献   

渭河盆地北缘断裂带活动特征的初步研究   总被引：8，自引：1，他引：7       下载免费PDF全文

徐煜坚  申屠炳明  汪一鹏 《地震地质》1988,10(4):77

本文从渭河盆地北缘断裂的形成和活动时代,活动特征等资料出发,结合北缘断裂带及整个盆地历史地震活动和新生界地层发育特征的综合分析,对北缘断裂带的活动期次,主要断层的运动幅度和滑动速率及其时空演变规律和机制等问题进行了探讨。文章指出,北缘断裂带的形成是一个由盆地中心向北逐渐扩展的过程,自上新世起,断层活动明显有东强西弱的变化特征,而且扩展方向也发生了偏转。这一转变及活动强度的东西差异与山西剪切带对渭河盆地的影响密切相关  相似文献   

Crustal motion and deformation in Greece from a decade of GPS measurements, 1993–2003   总被引：1，自引：1，他引：0  

Ch. Hollenstein  M.D. Müller  A. Geiger  H.-G. Kahle   《Tectonophysics》2008,449(1-4):17-40

The Hellenic plate boundary region, located in the collision zone between the Nubian/Arabian and Eurasian lithospheric plates, is one of the seismo-tectonically most active areas of Europe. During the last 15 years, GPS measurements have been used to determine the crustal motion in the area of Greece with the aim to better understand the geodynamical processes of this region. An extended reoccupation network covering whole Greece has been measured periodically in numerous GPS campaigns since the late eighties, and a continuous GPS network has been operated in the region of the Ionian Sea since 1995. In this paper, we present a new detailed high-quality solution of continuous and campaign-type measurements acquired between 1993 and 2003. During the GPS processing, a special effort was made to obtain consistent results with highest possible accuracies and reliabilities. Data of 54 mainly European IGS and EUREF sites were included in the GPS processing in order to obtain results which are internally consistent with the European kinematic field and order to allow for a regional interpretation. After an overview of the results of the IGS/EUREF sites, the results from more than 80 stations in Greece are presented in terms of velocities, time series, trajectories and strain rates. Previous geodetic, geological and seismological findings are generally confirmed and substantially refined. New important results include the observation of deformation zones to the north and to the south of the North Aegean Trough and in the West Hellenic arc region, arc-parallel extension of about 19 mm/yr along the Hellenic arc, and compression between the Ionian islands and the Greek mainland. Due to continuous long-term observations of 4–8 years, it was possible to extract height changes from the GPS time series. In Greece, we observe a differential subsidence of the order of 2 mm/yr between the northern and central Ionian islands across the Kefalonia fault zone. The differential subsidence of the central Ionian islands with respect to the northwestern Greek mainland amounts to 4 mm/yr.  相似文献   

Experimental decipherment of the soft-sediment deformation observed in the upper part of the Talchir Formation (Lower Permian), Jharia Basin, India     

Prabir Dasgupta   《Sedimentary Geology》2008,205(3-4):100-110

Four types of soft-sediment folds of distinct geometry can be recognized in the upper part of the Talchir Formation (Lower Permian) of Jharia Basin, India. These folds, on systematic examination, indicate some events of progressive deformation. Experimental study reveals that if a layered stack of clay and overlying sand is allowed to flow slowly down a slope, differential velocity due to viscosity contrast leads to the deformation of the rheologic interface. The sharp planar contact gradually becomes wavy leading to the development of round-hinged folds involving sediments adjacent to it. With the advancement of the flow these folds gradually become overturned with the rotation of the axial plane in the direction of flow. Computer simulation suggests that progressive deformation of these folds by simple shearing may lead to the formation of tight isoclinal folds, which on dislocation along intrastratal normal faults may lead to the development of rootless isoclinal folds. The sheath folds observed in the studied section also indicate accentuation of the curved hinge due to simple shearing. The spatial distribution of these fold types in conjunction with the inferred direction of progressive deformation indicate basinward translation of the slump slice. If the same stack of sediments rapidly flows down the slope, the waveform generated at the interface quickly breaks in the form of roll-up recumbent fold due to Kelvin–Helmholtz instability.  相似文献   

U–Pb SHRIMP zircon geochronology and T–t–d history of the Kampa Dome, southern Tibet     

M.C. Quigley  Y. Liangjun  C. Gregory  A. Corvino  M. Sandiford  C.J.L. Wilson  L. Xiaohan 《Tectonophysics》2008,446(1-4):97-113

Structural, petrographic and geochronologic studies of the Kampa Dome provide insights into the tectonothermal evolution of orogenic crust exposed in the North Himalayan gneiss domes of southern Tibet. U–Pb ion microprobe dating of zircons from granite gneiss exposed at the deepest levels within the dome yields concordia ²⁰⁶Pb/²³⁸U age populations of 506 ± 3 Ma and 527 ± 6 Ma, with no evidence of new zircon growth during Himalayan orogenesis. However, the granite contains penetrative deformation fabrics that are also preserved in the overlying Paleozoic strata, implying that the Kampa granite is a Cambrian pluton that was strongly deformed and metamorphosed during Himalayan orogenesis. Zircons from deformed leucogranite sills that cross-cut Paleozoic metasedimentary rocks yield concordant Cambrian ages from oscillatory zoned cores and discordant ages ranging from ca. 491–32 Ma in metamict grains. Since these leucogranites clearly post-date the metasedimentary rocks they intrude, the zircons are interpreted as xenocrysts that are probably derived from the Kampa granite. The Kampa Dome formed via a series of progressive orogenic events including regional ~ N–S contraction and related crustal thickening (D₁), predominately top-to-N ductile shearing and crustal extension (D₂), top-to-N brittle–ductile faulting and related folding on the north limb of the dome, localized top-to-S faulting on the southern limb of the dome, and crustal doming (D₃), and continued N–S contraction, E–W extension and doming (D₄). Structural and geochronologic variability amongst adjacent North Himalayan gneiss domes may reflect changes in the magnitude of crustal exhumation along the North Himalayan antiform, possibly relating to differences in the mid-crustal geometry of the exhuming fault systems.  相似文献   

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm     

S. Amir Reza Beyabanaki  Roozbeh Geraili Mikola  Kianoosh Hatami   《Computers and Geotechnics》2008,35(3):346-356

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.  相似文献