吉林台水电站厂房高边坡稳定性及加固措施研究   总被引：2，自引：0，他引：2  

杨健  耿克勤 《水文地质工程地质》2004,31(2):41-44

吉林台水电站厂房后边坡开挖形成140～340m的高边坡,保证其长期运行稳定性至关重要。在结合地质资料对边坡的失稳模式进行初步判断的基础上,采用极限平衡分析方法对正常蓄水、暴雨影响、地震荷载等工况条件下边坡的整体抗滑稳定性进行分析,得出暴雨对边坡稳定影响较大的结论,据此提出以排水结合预应力锚索为主的边坡加固增稳措施,实践证明该措施是有效的。  相似文献   

昆明白泥井3号隧道围岩稳定性FLAC3D模拟   总被引：4，自引：2，他引：4  

吴传斌  施斌  孙宇  赵永贵 《水文地质工程地质》2004,31(6):52-55

应用FLAC^3D数值模拟软件对昆明白泥井3号隧道围岩稳定性进行了分析和评价。结果表明隧道支护后围岩的最大变形出现在隧道右侧拱顶，为1．00cm；隧道支护后左侧拱和右侧拱脚处剪应变明显增大，为应力集中区；围岩可以通过自身应力、应变和能量的调整，使整个隧道围岩处于稳定状态；同时也表明FLAC^3D用于隧道围岩变形分析是可行的。  相似文献   

Three-dimensional forward and backward modelling of diapirism: numerical approach and its applicability to the evolution of salt structures in the Pricaspian basin     

Alik Ismail-Zadeh  Igor Tsepelev  Chistopher Talbot  Alexander Korotkii   《Tectonophysics》2004,387(1-4):81-103

Numerical studies of ductile deformations induced by salt movements have, until now, been restricted to two-dimensional (2D) modelling of diapirism. This paper suggests a numerical approach to model the evolution of three-dimensional (3D) salt structures toward increasing maturity. This approach is also used here to restore the evolution of salt structures through successive earlier stages. The numerical methodology is applied to study several model examples. We analyse a model of salt diapirs that develop from an initial random perturbation of the interface between salt and its overburden and restore the evolved salt diapirs to their initial stages. We show that the average restoration errors are less than 1%. An evolutionary model of a 2D salt wall loaded by a 2D pile of sediments predicts a decomposition of the salt wall into 3D diapiric structures when the overburden of salt is supplied by 3D synkinematic wedge of sediments. We model salt extrusion feeding a gravity current over the depositional surface and estimate an average rate of extrusion and horizontal velocity of salt spreading. Faulting of the overburden to salt overhangs initiates new secondary diapirs, and we analyse the growth of these secondary diapirs. We also study how lateral flow effects the evolution of salt diapirs. The shape of a salt diapir can be very different if the rate of horizontal flow is much greater than the initial rate of diapiric growth solely due to gravity. We discuss the applicability of the results of the models to the evolution of Late Permian salt structures in the Pricaspian basin (Russia and Kazakhstan). These structures are distinguishable into a variety of styles representing different stages of growth: salt pillows, diapirs, giant salt massifs, 2D diapiric walls and 3D stocks complicated by large overhangs. The different sizes, shapes and maturities of salt structures in different parts of the Pricaspian basin reflect areal differences in salt thickness and loading history. Our results suggest that the numerical methodology can be employed to analyse the evolution of all salt structures that have upbuilt through younger ductile overburdens.  相似文献   

用GPS秒信号锁定高频振荡器的方法研究   总被引：1，自引：0，他引：1  

郭芳 《时间频率学报》2004,27(2):94-102

对用远距离传输的GPS秒信号锁定本地高频晶体振荡器的方法进行了探讨。介绍了高精度的时间数字转换器TDC(Time to Digital Converter)和对滤波的方法进行了探讨。为了降低成本又能够满足设计要求的精度，还考虑了双D／A转换的方法。有关的硬件系统已经通过了调试和一系列的测试和实验，在测量和控制精度方面，能达到设计的要求。此外，提出了这个系统有待解决的问题，如双D／A转换的非线性问题，Kalman滤波抗野值及继续提高精度的问题。  相似文献   

基于面向对象的空间目标3维交互式建模的设计     

山海涛郭建星  翟辉琴张保明 《测绘学院学报》2004,21(3):205-207

3维数据模型的建立是实现真3维GIS的一个核心问题。在充分分析现有3维数据模型的基础上，比较了传统模型的优缺点。针对空间目标建模的特点，设计了一种面向对象的3维数据模型。考虑到软件的实用性和可扩展性，着重论述了3维交互式设计及数据管理。  相似文献   

工业测量数据的可视化方法研究   总被引：1，自引：0，他引：1  

贺磊黄桂平  李广云毛悦 《测绘学院学报》2004,21(4):305-307,310

简要介绍了测量获取离散点数据的一般手段，阐述了3维曲面重建的NURBS方法和空间Delauany三角剖分方法，简要说明了使用OpenGL进行3维开发的机制，并给出了3维空间交互和查询的实现步骤。为有效地发掘测量数据潜在的信息和规律提供了一条新的途径。  相似文献   

基于二维直接线性变换的数字相机畸变模型的建立   总被引：10，自引：3，他引：10  

冯文灏  李建松  闫利 《武汉大学学报(信息科学版)》2004,29(3):254-258

提出并论证了基于二维直接线性变换的畸变的校正方法。本方法特别适用于各类固态摄像机(CCD、CID、PSD)的畸变模型的建立，以补偿各类像点系统误差。  相似文献   

地球重力场、重力、重力梯度在三维直角坐标系中的表达式     

陈俊勇 《武汉大学学报(信息科学版)》2004,29(5):377-379

现代卫星重力测量主要利用星载GPS接收机、加速度计、星载测距仪等来确定重力卫星的轨道 ,削弱非保守力的干扰 ,由此根据卫星的位置、速度及其变率来确定地球重力场。而上述GPS等星载仪器所提供的数据 ,包括卫星轨道坐标及其速率、扰动加速度、星间距离及其变率 ,都是以三维直角坐标 (x ,y ,z)的形式表示的 ,因此 ,地球重力场、重力和重力梯度在三维直角坐标系中的表达式在卫星重力解算中具有实际意义  相似文献   

Inversions for MT data in 2D symmetrical anisotropic media     

杨长福  林长佑  孙崇赤  李清河 《地震学报(英文版)》2005,18(3):361-367

Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…  相似文献   

3D and 4D controls on carbonate depositional systems: sedimentological and sequence stratigraphic analysis of an attached carbonate platform and atoll (Miocene, Níjar Basin, SE Spain)     

GEORG WARRLICH†  DAN BOSENCE†  DAVE WALTHAM† 《Sedimentology》2005,52(2):363-389

This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km² area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.  相似文献