Pleiades高分辨率卫星影像道路提取技术     

张心红 《测绘与空间地理信息》2016,(11):115-117

遥感影像上的道路提取是摄影测量与计算机视觉研究的一项重要内容,本文设计了一种高分辨率卫星影像道路提取方法,首先,利用Canny边缘提取算子提取左影像上的边缘,并利用霍夫变换对线特征进行检测,根据道路的几何特性检测平行直线,再基于影像匹配方法匹配立体像对上的道路;然后,利用卫星影像RPC参数前方交会原理实现道路的几何定位。利用Pleiades卫星影像开展试验,自动提取的道路与人工采集的道路几何定位误差在1个像素以内,试验结果验证了本文方法的有效性。  相似文献   

基于SDOG-ESSG的地球系统元胞自动机框架及其应用试验     

余接情  石珍  吴立新  邢松伟  贾永基 《测绘学报》2016,45(Z1):40-47

元胞自动机结构简单且具备模拟复杂系统的能力,已被广泛应用于大气、流体力学、地球物理等领域。然而,现有元胞自动机以欧氏空间为约束进行地球系统过程模拟,忽略了地球重力等天然约束,导致计算过程中元胞状态的传递方向与真实运动的趋势方向不相符,一定程度上扭曲了最终的模拟结果。本文提出了地球系统元胞自动机这一概念,并从元胞表达及构建、邻居模型等方面设计了基于SDOG-ESSG格网的地球系统元胞自动机框架。由于演化规则取决于不同的应用,因此本文进一步以地壳的热传递为例,通过对热力学方程离散化设计了相应的演化规则。最后,借助公开的数据源开展了地壳热传递元胞自动机模拟的初步试验,并与一定区域下的数值模拟结果展开了比对。试验表明,与数值模拟方法相比,本文方法的模拟结果相对误差控制在27%以内,具备一定程度的可行性,可作为地球系统过程模拟的一种新思路。  相似文献   

GPS 高程转换的总体最小二乘组合方法     

王乐洋  吴飞  吴良才 《测绘工程》2016,25(4):11-14

在现有GPS高程转换的研究中,通常只采用单一的解算方法,然而,不同的计算方法由于适用的条件不同,在对同一组数据进行解算时,解算的精度也各有优劣。针对以上问题,文中提出GPS高程转换的总体最小二乘组合方法,对多种不同的高程转换方法进行组合,运用总体最小二乘法计算不同方法的权值,结合实际工程数据,验证该方法的可行性。计算结果表明,提出的方法能够有效地提高高程转换精度。  相似文献   

Landsat 8陆地成像仪影像的缨帽变换推导   总被引：3，自引：0，他引：3  

李博伦  遆超普  颜晓元 《测绘科学》2016,41(4):102-107

针对Landsat 8陆地成像仪影像,该文提出了一种缨帽变换系数的推算方法。利用准同步的Landsat ETM+影像缨帽变换结果为目标值,采用普鲁克算法对不同地理分布下的陆地成像仪影像样本点的主成分轴分别进行旋转,得到相应的初始变换系数;通过广义普鲁克分析对所得初始变换系数进行平均化,并以格拉姆-施密特算法保持其正交性,最终得到基于陆地成像仪大气表观反射率数据的缨帽变换系数。验证结果表明,与现有陆地成像仪变换系数相比,该文提出的缨帽变换精度相对较高,误差较小,变换后的不同地物覆盖类型具有更好的可分性。  相似文献   

A hybrid approach to modeling territorial control in violent armed conflicts          下载免费PDF全文

Ran Tao  Daniel Strandow  Michael Findley  Jean‐Claude Thill  James Walsh 《Transactions in GIS》2016,20(3):413-425

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.  相似文献   

Grid pattern recognition in road networks using the C4.5 algorithm   总被引：1，自引：0，他引：1  

Jing Tian  Fei Gao  Feng Zhao 《制图学和地理信息科学》2016,43(3):266-282

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.  相似文献   

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China     

LI Cunlei  CHEN Panpan  LIU Jianmei  Fu Hongtao  ZHANG Jinliang  XIE Jun 《《地质学报》英文版》2016,90(5):1809-1820

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.  相似文献   

与找矿信息量法结合的含矿网格单元蒙特卡洛矿产资源潜力评价方法的原理及应用     

浦路平  朱国器  尹意求  林锦富 《矿产与地质》2016,(3):490-495

文章介绍了以含矿网格单元为统计单位、并与找矿信息量法结合的蒙特卡洛矿产资源潜力评价方法的原理和工作步骤,以及用该法进行丹池锡多金属成矿带锡矿矿产资源潜力评价工作案例,表明该法可以把评价工作区的矿产空间分布信息、成矿模式和找矿模型、成矿-找矿空间信息引入蒙特卡洛方法中,无需人类专家估计矿床个数,减少了工作步骤,提高了工作效率和自动化程度,减少了因人为主观性而造成的评价误差。  相似文献   

横向振动格栅紊流紊动特性试验          下载免费PDF全文

李文杰  刘华  杨胜发  王涛  张鹏 《水科学进展》2016,27(1):49-56

建立了一套大尺度格栅紊流试验系统,格栅进行有别于传统垂向模式的横向振动,采用粒子图像测速技术(Particle Image Velocimetry,PIV)测量流速。对瞬时流速的检验表明,该系统产生的紊流场具有较强的随机性和统计规律性。均方根流速在格栅片附近变化较大,在两片格栅中间处趋于稳定,纵向均方根流速明显大于垂向均方根流速,二者比值在1.5~2.0之间,接近天然明渠紊流。雷诺应力在距格栅越近处波动越大,随着距格栅距离的增加而减小,至两片格栅中间处雷诺应力基本为0。时间和长度积分尺度在格栅片处最小,随着距格栅距离的增加而线性增加,至两片格栅中间处达到最大值。流速能谱呈现Kolmogorov理论的-5/3次方规律。本系统生成的紊流场的统计规律与传统的垂向振动格栅紊流较为一致,但纵向和垂向的紊动强度更接近实际,为后续紊流中泥沙和污染物等运动机理的研究奠定了基础。  相似文献   

华北北缘东段开原地区三叠纪侵入岩年代学及岩石地球化学研究   总被引：3，自引：2，他引：1  

刘锦  刘正宏  李世超  赵辰  王楚杰  彭游博  杨仲杰  豆世勇 《岩石学报》2016,32(9):2739-2756

本文报道了位于华北北缘东段开原地区尖山子岩体、宝兴岩体和树德屯岩体的岩相学、岩石地球化学及年代学特征,探讨了上述岩体的形成时代、岩石成因及其构造环境。锆石U-Pb定年结果表明,尖山子岩体形成于251±1.3Ma,宝兴岩体形成于235±1.3Ma,树德屯岩体形成于224±1.9Ma,说明开原地区三叠纪存在早三叠世、中三叠世和晚三叠世三个时期的岩浆活动。尖山子岩体以二长花岗岩为主,具高硅低镁特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Hf、Zr等高强场元素;δEu=0.55~1.87,(La/Yb)N=6.23~47.9,轻重稀土分馏明显,富集轻稀土,亏损重稀土。宝兴岩体以花岗闪长岩为主,Si O2含量变化较大(52.36%~74.06%),Al2O3含量(14.5%~17.34%),Mg O含量(0.61%~3.66%),属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti等高强场元素;无明显的Eu异常,(La/Yb)N=6.81~25.6,轻重稀土分馏较明显,富集轻稀土,亏损重稀土。树德屯岩体以闪长岩为主,岩石具有低硅高镁特征,K2O/Na2O比值为0.33~0.76,显示富K贫Na特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti、Hf、Zr等高强场元素;无明显的Eu异常,(La/Yb)N=3.87~10.2,轻重稀土分馏不明显。上述岩石地球化学特征表明,尖山子岩体和宝兴岩体的原始岩浆起源于下地壳基性物质的部分熔融,树德屯岩体的原始岩浆起源于亏损的地幔楔。研究区三叠纪岩浆岩形成于造山阶段挤压环境下。华北北缘东段的挤压碰撞作用一直持续到晚三叠世(224Ma),而造山阶段向造山后阶段的构造转换(挤压地壳加厚向伸展垮塌的环境转换)发生于晚三叠世-早侏罗世(224~180Ma)期间。华北北缘东段中生代岩石圈减薄或破坏始于晚三叠世-早侏罗世(224~180Ma)期间。  相似文献