激光测高数据辅助卫星成像几何模型精化处理     

曹宁  周平  王霞  唐新明  李国元 《遥感学报》2019,23(2):291-302

资源三号02星搭载了中国首个对地观测试验性激光测高载荷。借鉴目前较成熟的卫星影像区域网平差理论的基础上,结合近年来激光测高数据精度的大幅提升以及资源三号02星激光测高数据的特点,首次提出了激光测高数据辅助卫星立体影像进行成像几何模型精化处理的通用理论。首先,利用传统的区域网平差算法对所处理影像进行高精度连接点匹配处理,并对其进行无约束的自由网平差处理,获得高精度相对精度及不亚于原始成像几何模型的绝对精度;其次,根据激光测高数据3维坐标和精化后参考影像成像几何模型获取激光数据参考影像坐标;而后将参考影像坐标通过几何模型映射获取目标影像上待匹配影像坐标,通过连接点匹配算法,对待匹配目标影像坐标进行精化获取高精度像方同名点;最后,以同名点作为高程控制进行区域网平差计算,对影像成像几何模型进一步处理,获取高精度补偿参数。通过湖北、青海两测区的试验,以激光测高数据辅助卫星影像几何模型精化精度可分别达到1.97 m、3.23 m,结果表明本文提出的方法可有效提高卫星立体数据测图精度。  相似文献   

VELOCITY–DISCHARGE RELATIONSHIPS DERIVED FROM DYE TRACER EXPERIMENTS IN GLACIAL MELTWATERS: IMPLICATIONS FOR SUBGLACIAL FLOW CONDITIONS     

PETER W. NIENOW  MARTIN SHARP  IAN C. WILLIS 《水文研究》1996,10(10):1411-1426

Repeated dye tracer tests were undertaken from individual moulins at Haut Glacier d'Arolla, Switzerland, over a number of diurnal discharge cycles during the summers of 1989–1991. It was hoped to use the concepts of at-a-station hydraulic geometry to infer flow conditions in subglacial channels from the form of the velocity–discharge relationships derived from these tests. The results, however, displayed both clockwise and anticlockwise velocity–discharge hysteresis, in addition to the simple power function relationship assumed in the hydraulic geometry approach. Clockwise hysteresis seems to indicate that a moulin drains into a small tributary channel rather than directly into an arterial channel, and that discharges in the two channels vary out of phase with each other. Anticlockwise hysteresis is accompanied by strong diurnal variations in the value of dispersivity derived from the dye breakthrough curve, and is best explained by hydraulic damming of moulins or sub/englacial passageways. Despite the complex velocity–discharge relationships observed, some indication of subglacial flow conditions may be obtained if tributary channels comprise only a small fraction of the drainage path and power function velocity–discharge relationships are derived from dye injections conducted during periods when the supraglacial discharge entering the moulin and the bulk discharge vary in phase. Analyses based on this premise suggest that both open and closed channel flow occur beneath Haut Glacier d'Arolla, and that flow conditions are highly variable at and between sites.  相似文献   

地心和月心引力常数及月球形心与质心的确定   总被引：1，自引：0，他引：1  

孔祥元  李建成  郭际明  闫利 《大地测量与地球动力学》2006,26(2):109-114

指出了地心引力常数GMe、月心引力常数GMl及月球形状中心和月球质量中心的意义和重要性;介绍了用空间探测器观测数据测定GMe与GMl及月球形状中心和月球质量中心的原理和方法;综合给出了利用空间探测器测定的数值。  相似文献   

平面点集凸壳的一种快速算法   总被引：7，自引：1，他引：6  

樊广佺  马丽平  杨炳儒 《地理与地理信息科学》2006,22(6):38-41

提出一种计算平面点集凸壳的快速算法———八方向极值快速凸壳算法。该算法首先对平面点集进行一次扫描,从而快速查找到东、南、西、北、东南、西南、东北、西北8个方向上的极值点,构造出一个更接近凸壳的初始凸壳,从而在后续的点集扫描中可以排除更多的内点,使该算法计算效率更高。该算法的空间复杂度为O(N);其时间复杂度虽然无法突破最坏情况下O(NlogN)的理论下限,但其期望时间复杂度已达到线性水平,并且可以容易地扩展到三维和高维空间。  相似文献   

Implementation of the semi-Lagrangian advection scheme on a quasi-uniform overset grid on a sphere   总被引：4，自引：0，他引：4  

李兴良  陈德辉  彭新东  肖锋  陈雄山 《大气科学进展》2006,23(5):792-801

The semi-Lagrangian advection scheme is implemented on a new quasi-uniform overset （Yin-Yang） grid on the sphere. The Yin-Yang grid is a newly developed grid system in spherical geometry with two perpendicularly-oriented latitude-longitude grid components （called Yin and Yang respectively） that overlapp each other, and this effectively avoids the coordinate singularity and the grid convergence near the poles. In this overset grid, the way of transferring data between the Yin and Yang components is the key to maintaining the accuracy and robustness in numerical solutions. A numerical interpolation for boundary data exchange, which maintains the accuracy of the original advection scheme and is computationally efficient, is given in this paper. A standard test of the solid-body advection proposed by Williamson is carried out on the Yin-Yang grid. Numerical results show that the quasi-uniform Yin-Yang grid can get around the problems near the poles, and the numerical accuracy in the original semi-Lagrangian scheme is effectively maintained in the Yin-Yang grid.  相似文献   

利用毛管压力曲线分形分维方法研究流动单元   总被引：3，自引：0，他引：3  

师永民  张玉广  何勇  郑海飞  吕文忠  郑红军 《地学前缘》2006,13(3):129-134

利用取心井铸体薄片获得的图像资料和毛管压力曲线,通过图像分形几何学方法以分维数的形式定量地表征出了复杂的微观孔隙喉道结构特征,发现能够很好地划分和评价孔隙岩石中油、气、水的渗流差异,可以用于储层微观流动单元表征。文中阐述了岩石微观孔隙喉道结构分形的理论基础、计算方法和应用于表征流动单元的依据。建立了中国西部砾岩低渗透油藏微观孔隙喉道分维数与孔隙度、渗透率之间计算图版,据此在油藏中利用常规测井资料获得的孔隙度、渗透率参数计算微观孔隙喉道分维数,开展全油藏流动单元划分与评价,取得了良好的效果。研究结果表明,利用毛管压力曲线分形分维方法研究储层微观流动单元是一种很有效的途径。  相似文献   

长江三峡巴东复杂斜坡系统成因研究   总被引：9，自引：0，他引：9  

刘传正刘艳辉  连建发 《地质论评》2006,52(4):510-521

三峡库区巴东县新城区所在的扇形大斜坡是一个复杂斜坡系统。斜坡后缘边界的挤压变形带是斜坡整体沿其底界面（T1j^3-T2b^1）之间岩层界面向长江发生重力蠕滑作用的结果,不存在“巴东断裂”问题。斜坡系统内部未发现成规模的褶皱,也不存在数量众多的内动力成因的断裂带。巴东斜坡区浅表生变形破坏类型可概括为侧向拉裂、“雪崩式”垮塌、表层风化、侧向滑移张剪破裂、岩层折断变位、软岩膝折剪破裂和压扭破裂又重胶结7种重力卸荷破坏力学模式。斜坡系统内部发育分期分区（块）滑动（滑坡）现象,但不存在构造地质意义上的“断层”形迹。在地貌形态上,巴东大斜坡被4条冲沟分割成5个斜坡单元。在斜坡地质结构、成因类型与空间分布上,巴东大斜坡可划分为3个层次,即表层崩塌滑坡成因为主的堆积层（第一层次）,冲沟分割且浅表生地质形迹发育的层状顺倾的中间基岩层（第二层次）和整体连续顺倾的深层基岩层（第三层次）。分形几何计算证明,巴东大斜坡的地貌形态尚处于侵蚀发育的青（幼）年期。FLAC^3D数值模拟发现,在长江侵蚀下切的不同阶段,巴东斜坡体前缘和后缘接近底界面位置塑性变形区分布集中,但不具备沿深层界面发生整体滑动剪出的可能性。基本认识是,“巴东复杂斜坡系统”是在官渡口-东瀼口向斜南翼（单斜山）的地质背景下,持续经受长江快速侵蚀下切外动力作用,河谷岸坡快速临空导致其自身重力产生强烈的侧向卸荷与滑移等浅表生地质改造作用过程而形成的,可简单地概括为“重力成因论”。  相似文献   

Simulating cross-sectional geometry of the main channel in response to changes in water and sediment in Lower Yellow River     

Wang  Yanjun  Wu  Baosheng  Zhong  Deyu 《地理学报(英文版)》2020,30(12):2033-2052

Journal of Geographical Sciences - To understand the non-equilibrium morphological adjustment of a river in response to environmental changes, it is essential to (i) accurately identify how past...  相似文献   

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns   总被引：6，自引：0，他引：6  

N.L. Watts   《Marine and Petroleum Geology》1987,4(4)

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.  相似文献   

多点液压式波浪能海水淡化系统建模与仿真     

胡缘  杨绍辉  何宏舟  陈沪  郑松根  张迪 《海洋工程》2019,37(1):134-141

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。  相似文献