Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation     

Koji Fujima 《Natural Hazards》2006,39(2):179-193

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.  相似文献   

Break out resistance of inclined anchors in sand     

Shubhra Goel  Shalini  Nihar Ranjan Patra 《Geotechnical and Geological Engineering》2006,24(6):1511-1525

Inclined anchors are widely used in a variety of civil engineering problems to resist oblique loads, most relevant being in transmission towers and in rocks and dams for structural strengthening. In the present study, the breakout resistance of the inclined anchors in sand has been worked out using limit equilibrium approach. The breakout resistance has been calculated for different soil friction angles with varying relative depth ratio and anchor inclination. The break out factor increases continuously with the inclination of the anchor. A comparison of predicted values of break out resistance of anchors by the proposed analysis with the experimental values as reported by the other researchers showed reasonably good agreement.  相似文献   

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue   总被引：4，自引：0，他引：4  

Miguel Gmez-Heras  Bernard J. Smith  Rafael Fort 《Geomorphology》2006,78(3-4):236-249

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.  相似文献   

A greenhouse study on root dynamics of cactus pears, Opuntia ficus-indica and O. robusta     

H.A. Snyman   《Journal of Arid Environments》2006,65(4):529-542

Over the last 10 years a great interest in spineless cactus pear was shown in the drier areas in terms of both fresh fruit and fodder production. However, there is a lack of knowledge on quantitative data on root dynamics of these plants needed to fully understand its potential under water limiting conditions. This study aimed at quantifying the effects of water stress on the growth of tap roots, side roots and rain roots of the species Opuntia ficus-indica (L.) Miller (cultivar Morado—green cladode) and O. robusta Wendl. (cultivar Monterey—blue cladode). One-year-old cladodes were planted in root boxes and pots (2002/2003 season) that were kept in the greenhouse at day/night temperatures of 25–30 °C/15–18 °C. Placing the cladodes flat on the soil, more areoles came in contact with the soil and therefore more roots developed in both species with an average of only 3.4% areole complexes not rooting. Each areole complex formed on average 3 roots. The highest daily tap root growth was 42 and 36 mm for O. ficus-indica and O. robusta, respectively. Tap root growth increased in the morning with water stress for both species but decreased in the afternoon. Side root growth increased with water stress, with that of O. robusta more per tap root than O. ficus-indica. O. robusta showed a finer root system than O. ficus-indica. The side roots grew as much as 8 and 5 mm per day for O. ficus-indica and O. robusta, respectively. Whitish rain roots developed on the established roots within the first hour after rewetting the soil and grew for only 3 days. Rain roots grew up to 7 and 5 mm within a day for O. ficus-indica and O. robusta, respectively. Considering all studied aspects of their roots systems, O. robusta appears to be better adapted to drought (less sensitive to water stress) than O. ficus-indica.  相似文献   

Strain partitioning and stress rotation at the North Anatolian fault zone from aftershock focal mechanisms of the 1999 Izmit M_w= 7.4 earthquake     

Marco Bohnhoff  Helmut Grosser  Georg Dresen 《Geophysical Journal International》2006,166(1):373-385

  相似文献   

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation   总被引：16，自引：1，他引：16  

Wei Zhang  Xiaofei Chen 《Geophysical Journal International》2006,167(1):337-353

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.  相似文献   

Quantitative determination of stress by inversion of speckle interferometer fringe patterns: experimental laboratory tests     

Douglas R. Schmitt  Mamadou S. Diallo  Frank Weichman 《Geophysical Journal International》2006,167(3):1425-1438

  相似文献   

基于土质边坡塑性极限分析条分法的可靠度计算方法研究   总被引：3，自引：0，他引：3  

王根龙  伍法权  门玉明 《工程地质学报》2006,14(6):835-840

从土塑性极限分析上限定理出发,以土质边坡塑性极限分析条分法为基础,在引入可靠性分析方法(JC法)后,建立了土质边坡塑性极限分析条分法可靠度极限状态方程,并推导得到了塑性极限分析条分法可靠度计算公式。这种方法实现了定值计算向不确定性计算的转变,同时可靠度指标的计算结果具有概率的意义。  相似文献   

福建平潭虎潮山滑坡成因机理分析与评价   总被引：3，自引：0，他引：3  

秦刚  姚环  林燕滨 《中国地质灾害与防治学报》2006,17(3):10-13

虎潮山滑坡位于平宏公路12k 704~12k 884段北侧山坡体上,是平潭海岛通往陆地的唯一公路通道。论文通过定性的工程地质分析和定量计算评价了虎潮山坡体稳定性的变化趋势,提出改建公路超挖深切坡脚和持续长时间强降雨导致的孔隙水压力作用是边坡发生滑动破坏的主要因素。  相似文献   

隧道锚杆锚固质量无损检测技术   总被引：2，自引：0，他引：2  

黄华林  朱自强  杨天春  王齐仁  鲁光银 《物探与化探》2005,29(6):551-553

采用声波检测仪,应用声频应力波在不同波阻抗面反射的能量和相位的变化原理,对隧道的锚杆锚固质量进行了无损检测试验研究,并对检测技术进行了探讨.结果表明,作为一种工程质量管理辅助手段,采用应力波对锚杆锚固质量进行无损检测,丰富了隧道围岩锚固质量检测方法,为隧道工程建设提供更好的质量保障.  相似文献