MapGIS下空间数据库的建立及其典型问题研究   总被引：4，自引：0，他引：4  

李定平  胡光道  程路 《武汉大学学报(信息科学版)》2005,30(11):1029-1032

以云南省地质图、水文地质图空间数据库的建立为例,通过对空间数据库建设中资料准备、图形矢量化、空间数据处理及文件转换四个过程的分析,总结了在进行回溯型空间数据库建库过程中需要注意的一些典型问题,并提出了解决的办法。论述了在MapGIS下空间数据库建立过程中的一些技巧及经验。  相似文献   

房产测绘平面图系统的实现研究   总被引：1，自引：0，他引：1  

陈洋  张宏  蒋文明  乔延春  温永宁 《现代测绘》2005,28(3):15-16,19

随着城市规划管理的不断发展．使得城市房产测绘单位采用大型空间数据库管理测绘平面图资料成为必然。通过建立房产测绘平面图系统，可以有效地解决数据标准不一致．图数不能互访，测绘各部门无法协调一致等问题，充分发挥网络功能，提升整个城市的房产管理水平．达到房产管理和房产服务一体化的目标。本文详细论述了房产测绘平面图系统的概念、设计原则和系统功能．在南京数字房产共享平台的建设中得到了实现．并取得了良好的效果。  相似文献   

摄影测量数据库的设计与建立     

郑浩马晓锋  江振治赵斐 《测绘科学与工程》2005,25(4):29-32

摄影测量数据库主要存储和管理数字地图成果数据，包括数字高程模型数据（DEM）、数字矢量地图数据（DLG）、数字影像地图数据（DOM）和数字栅格地图数据（DRG）。本文主要介绍了摄影测量数据库的设计、建立以及应用分析等内容。  相似文献   

Geometry and accuracy of reflecting points in bistatic satellite altimetry     

J. Kostelecký  J. Klokočník  C.A. Wagner 《Journal of Geodesy》2005,79(8):421-430

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.  相似文献   

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery     

Joanne  Poon  Clive S.  Fraser  Zhang  Chunsun  Zhang  Li  Armin  Gruen 《The Photogrammetric Record》2005,20(110):162-171

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.  相似文献   

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry   总被引：1，自引：0，他引：1  

Clive S.  Fraser  Alex  Woods  Danny  Brizzi 《The Photogrammetric Record》2005,20(111):205-217

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.  相似文献   

因子计量图的新思路   总被引：3，自引：0，他引：3  

朴寿成  翟玉峰等 《地质与勘探》2002,38(2):68-70

R型因子分析中，因子计量从所有原始变量中将某一特定因子的有关信息集中起来，可被用来解释某一特定地质作用形成的样品在不同空间的分布等问题，由已知典型地质体的元素含量等地球化学指标计算出来的因子计量系数矩阵作为模型，用这个模型可以计算未知地质体的因子计量，这种方法，不仅可以节省每次加入新样品或舍去部分样品时所有因子计量图都需要重新做的繁重的工作量，而且更重要的是这种图的地球化学意义明确，使我们能够用已知的典型地质现象去预测未知地质观象提供了一条新的途径。  相似文献   

资源勘查图件计算机辅助编绘系统的结构分析与开发策略研究   总被引：7，自引：1，他引：7  

刘刚  汪新庆等 《地质与勘探》2002,38(4):60-63

如何站在信息系统的高度来进行资源图件计算机辅助编绘系统的快速开发，是资源信息系统领域计算机应用的一个重要研究课题。在结构分析的基础上，将资源图件计算机辅助编绘系统划分为图形数据库，应用图形系统和基础图形系统3个基本部分。对于复杂资源图件的计算机辅助编绘，需要地矿点源信息系统的支持。在基础图形系统上进行专业编绘程序的二次开发是高效建立图件编绘系统的最佳途径，并需注意GIS集成应用，三维可视化，人工智能和参数化设计等方法的运用，而系统平台开发是复杂应用的高级阶段。该思想可应用于煤及油气勘探，工程开发，矿区管理及区域地质等诸多领域的软件开发中。  相似文献   

单道扫描电感耦合等离子体发射光谱法测定地质样品中的微量稀土元素     

郭振华  张立英  杜百娟 《化工矿产地质》2003,25(1):57-60

采用Na_2O_2熔融矿样,水提取,加三乙醇胺、EGTA做掩蔽剂。经氢型阳离子交换树脂交换分离富集稀土元素,由于选择了合适的仪器条件及测定波长,有效地消除了电感耦合等离子体发射光谱法(ICP-AES)测定过程中的基体干扰和光谱干扰。应用于地质样品中的稀土元素分析,获得了满意的准确度、精密度及检出限。  相似文献   

专题地图的生产制作     

吕孟旭 《测绘与空间地理信息》2003,26(1):33-35

介绍使用计算机制作专题地图的工艺流程,及计算机制图在印刷前的生产制作的工作步骤和方法,指出了在制作中需要注意的事项,对出版高质量的地图在各环节如何加以控制提出了建议。  相似文献